Hempel Hard Racing TecCel A/F Antifouling True Blue 30390 0,75Lt 456COL003
zoom_out_map
chevron_left chevron_right
-35%

Hempel Hard Racing TecCel A/F Antifouling True Blue 30390 0,75Lt 456COL003

Hard matrix antifouling containing high performance TecCel forming a smooth low friction. For boats that need to increase performance and speed. Seasonal protection from fouling without chalking.

€43.14 VAT included

€35.36 VAT excluded

€66.37-35%

Il Nostro Negozio

Visit us in our shop

WE ARE AT YOUR DISPOSAL AT OUR POINT OF SALE
Not just online! Come and visit us also in the shop!

In our store you will find a wide selection of selected items and you will be assisted by our specialized staff with over a decade of experience in the nautical sector.
Everything for the boat ... deck equipment, anchoring and mooring, hydraulic and electrical systems, photovoltaics, stainless steel hardware, antifouling and paints, engine spare parts, on-board safety, sailing accessories, nautical instruments, GPS, depth sounders and much more!

We are in San Giorgio di Nogaro in the province of Udine, an important basin, located in the Bassa Friulana, bathed by the Corno river ... a few km from well-known destinations such as Lignano, Grado, Trieste etc.

Nautimarket Europe s.r.l., Via Marittima 17, 33058 San Giorgio di Nogaro (UD) Italy

Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)

MORE INFORMATION
HARD RACING TecCel is an antifouling for boats with a wide speed range.
Particularly suitable for powerboats. Do not use on aluminium hulls or light alloy.
Risk of corrosion in case of direct contact. For cold water, warm and hot.

PHYSICAL CONSTANTS:
Ciolour: True Blue 30390
Matt Finish
Volume solids,% 49 ± 1
Spreading rate: 12.3 m2/l [sq.ft./US gallon 493.2]-40 micron/1.6 mils
VOC content g/l 440 [3.6 lb/gallons USA]
Touche dry about 4 hour (s) 20° C/68° F approx 8. hour (s) 10° C/50° F
Specific gravity 1.6 kg/lt [13.2 lb/gallons USA]
Flash point° C 28 [82.4° F]
Unit size: 0,75Lt

APPLICATION DETAILS:
Application method:/Airless spray Brush/Roller/Cloth/spray paint
Thinner, (max volume) 08081 (5%)/(5%)/08081 08081 (5%)
nozzle hole-0.023 0.018 "
nozzle pressure 150 bar [2175 psi] (data for airless spray are indicatrivi and subject to adjustments)
Cleaning equipment HEMPEL's THINNER 08081
Dry thickness - recommended 40 micron [1.6 mils]
Wet thickness - recommended 75 micron [3 mils]
Overcoating interval, min as specified.
Overcoating interval, max as specified.

SURFACE PREPARATION:
Existing self-polishing antifouling: remove any oil or grease, etc. with appropriate detergent (HEMPEL's PRE-CLEAN 67602) and clean with fresh water at high pressure to ensure the complete removal of any antifouling. Allow to dry before covering.
Hard matrix antifouling exists: Sand to remove the old layer.
Remove any oil or grease, etc. with appropriate detergent (HEMPEL's PRE-CLEAN 67602) and clean with fresh water at high pressure to ensure the complete removal of any antifouling. Allow to dry before covering.
Sealant: The use or not of a a coat of sealant/tie depends on the type and condition of existing antifouling.

Hempel
456COL003
5709516026577