Hempel Hard Racing TecCel Antfouling 2,5Lt 10000 White 456COL006
zoom_out_map
chevron_left chevron_right
-37%

Hempel Hard Racing TecCel Antfouling 2,5Lt 10000 White 456COL006

As an antifouling for boats of glass fibre, wood, plywood, steel and aluminium. For power boats and regatta yachts.

€133.04 VAT included

€109.05 VAT excluded

€211.18-37%

Il Nostro Negozio

Visit us in our shop

WE ARE AT YOUR DISPOSAL AT OUR POINT OF SALE
Not just online! Come and visit us also in the shop!

In our store you will find a wide selection of selected items and you will be assisted by our specialized staff with over a decade of experience in the nautical sector.
Everything for the boat ... deck equipment, anchoring and mooring, hydraulic and electrical systems, photovoltaics, stainless steel hardware, antifouling and paints, engine spare parts, on-board safety, sailing accessories, nautical instruments, GPS, depth sounders and much more!

We are in San Giorgio di Nogaro in the province of Udine, an important basin, located in the Bassa Friulana, bathed by the Corno river ... a few km from well-known destinations such as Lignano, Grado, Trieste etc.

Nautimarket Europe s.r.l., Via Marittima 17, 33058 San Giorgio di Nogaro (UD) Italy

Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)

Hempel Hard Racing TecCel Antfouling 2.5Lt 10000 White

HEMPEL’S HARD RACING TecCel 7688W is a high performance, hard antifouling providing
outstanding protection all season. Includes TecCel technology which ensures reduced friction and increased speed. As an antifouling for boats of glass fibre, wood, plywood, steel and aluminium. For power boats and regatta yachts.
PHYSICAL CONSTANTS:
Shade nos/Colours: 10000/ White.
Finish:Flat
Volume solids, %: 54 ± 1
Theoretical spreading rate: 13.5 m2/l [541.4 sq.ft./US gallon] - 40 micron/1.6 mils
VOC content: 404 g/l [3.4 lbs/US gallon]
Dry to touch: 4 hour(s) 20°C/68°F
                   8 hour(s) 10°C/50°F
Specific gravity: 1.4 kg/litre [11.4 lbs/US gallon]
Flash point: 35 °C [95 °F]
Shelf life: 5 years 25°C/77°F

APPLICATION DETAILS:
Application method: Brush/Roller/Paint pad
Spray: For professional use only.
Thinner (max.vol.): HEMPEL'S THINNER 808 (No 3) 08081 (Brush/Roller/Paint pad): max. 5%
HEMPEL'S THINNER 808 (No 3) 08081 (Spray): 5-15%
Nozzle orifice: 0.018 - 0.023 "
Nozzle pressure: 150 bar [2175 psi]
(Airless spray data are indicative and subject to adjustment)
Indicated film thickness, dry: 40 micron [1.6 mils]
Indicated film thickness, wet: 75 micron [3 mils]
Overcoat interval, min: 4 hour(s) 20°C/68°F
8 hour(s) 10°C/50°F
Overcoat interval, max: None

SURFACE PREPARATION:
Preparation: Always ensure all surfaces are clean, oil free and dry. Clean the surface and remove possible oil and grease with a suitable detergent and sand with dry abrasive paper. Carefully remove dust with fresh water.
Uncoated surface: Prime prepared surface with HEMPEL’S LIGHT PRIMER 45551 and apply a tiecoat of HEMPEL’S UNDERWATER PRIMER 26030 whilst the surface is still tacky.
Existing old self-polishing or traditional antifouling: Remove loose matter and contaminants by high pressure fresh water cleaning. Allow to dry.
Existing old hard matrix antifouling or an unknown antifouling:
High pressure fresh water clean, wet abrade, remove dust. Clean and dry the surface. If condition of previous antifouling is poor, seal with 1 coat of HEMPEL’S UNDERWATER PRIMER 26030. If previous antifouling is in general bad condition, it is recommended to remove previous coats and prime before applying antifouling.

PRODUCT APPLICATION: Method: Apply 2 coats of the Antifouling paint at 40 μm dry film thickness each. Apply an additional coat around the waterline and high wear areas. Add thinner to assist application if necessary: max. 5%.
Stir product well before use. Wear protective gloves/clothing and eye/face protection.

Colours/Colour stability: Final colour develops after 1 week immersion in water. Length of service may have a certain influence on colour. The antifouling may obtain a copper-green tinge. There might be a slight difference in colour from batch to batch. Mix before painting.

Packing 2.5L. White colour.

Hempel
456COL006
5709516027543