Hempel Underwater Primer 26030 2,5 Lt 456COL029
Visit us in our shop
WE ARE AT YOUR DISPOSAL AT OUR POINT OF SALE
Not just online! Come and visit us also in the shop!
In our store you will find a wide selection of selected items and you will be assisted by our specialized staff with over a decade of experience in the nautical sector.
Everything for the boat ... deck equipment, anchoring and mooring, hydraulic and electrical systems, photovoltaics, stainless steel hardware, antifouling and paints, engine spare parts, on-board safety, sailing accessories, nautical instruments, GPS, depth sounders and much more!
We are in San Giorgio di Nogaro in the province of Udine, an important basin, located in the Bassa Friulana, bathed by the Corno river ... a few km from well-known destinations such as Lignano, Grado, Trieste etc.
Nautimarket Europe s.r.l., Via Marittima 17, 33058 San Giorgio di Nogaro (UD) Italy
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
UNDERWATER PRIMER 26030 Unit size 2,5 Lt
DESCRIPTION:
HEMPEL'S UNDERWATER PRIMER 26030 is a fast drying underwater primer containing aluminium flakes. For use as a sealer onto old antifouling or as a tiecoat over an epoxy primed surface before antifouling.
RECOMMENDED USE:
Suitable on glass fibre, wood and steel. For use on all areas below the waterline including keels.
PHYSICAL CONSTANTS:
Colour / Code: Aluminium / 19000
Finish: Matte
Volume solids,%: 37 ± 1
Theoretical coverage: 7.4 m²/Lt at 50 microns
Flash point: 35°C
Specific weight: 1.1 kg/Lt
Touch dry: 2-3 hours at 20°C 4-6 hours at 10°C
V.O.C .: 495 g/Lt
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, to standard deviation according to ISO 3534-1.
APPLICATION DETAILS:
Application method and Thinner (max. Vol.):
Airless THINNER 0811 (5%)
Air Spray Thinner 0811 (15%)
Brush THINNER 0811 (5%)
Nozzle orifice: .018 "
Nozzle pressure: 150 bar / 2175 psi (Airless spray data are indicative and subject to adjustment)
Cleaning of tools: HEMPEL'S THINNER 0811
Thickness, dry: 50 micron
Thickness, wet: 125 microns
Recoat interval, min: 3 hours at 20°C 6 hours at 10°C
Coating interval: None
SURFACE PREPARATION:
Always ensure all surfaces are clean, oil free and dry. Remove all impurities with HEMPEL'S YACHT CLEANER 67601, followed by a high-pressure cleaning with fresh water. Remove the flaking paint and other residues. Allow the wood to dry, sand and remove all dust. Touch-up with HEMPEL UNDERWATER PRIMER 26030.
PRODUCT APPLICATION:
The surface must be completely clean and dry. Surface temperature must be above dew point to avoid condensation. In confined spaces provide adequate ventilation during application and drying.
PRECEDING COAT:
None or according to specification
SUBSEQUENT COAT:
According to specification
NOTES:
If the surface has been exposed to pollutants, before recoating wash the surface thoroughly with a jet of fresh water at high pressure or with a jet of fresh water by rubbing with a stiff brush and allowing to dry.