Hempel Light Primer 45551 Two component Primer 0,75Lt White 456COL033
Visit us in our shop
WE ARE AT YOUR DISPOSAL AT OUR POINT OF SALE
Not just online! Come and visit us also in the shop!
In our store you will find a wide selection of selected items and you will be assisted by our specialized staff with over a decade of experience in the nautical sector.
Everything for the boat ... deck equipment, anchoring and mooring, hydraulic and electrical systems, photovoltaics, stainless steel hardware, antifouling and paints, engine spare parts, on-board safety, sailing accessories, nautical instruments, GPS, depth sounders and much more!
We are in San Giorgio di Nogaro in the province of Udine, an important basin, located in the Bassa Friulana, bathed by the Corno river ... a few km from well-known destinations such as Lignano, Grado, Trieste etc.
Nautimarket Europe s.r.l., Via Marittima 17, 33058 San Giorgio di Nogaro (UD) Italy
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
MORE INFORMATION
Hempel Light Primer 45551 A+B. Unit size 0,75 Lt. Colour Grey.
LIGHT PRIMER
Two-component epoxy primer thick. It forms a hard and tough coating resistant to water and petroleum products. Recommended as a primer above and below the waterline for aluminum boats, fiberglass, plywood, steel and ferro-cement. Also suitable for the prevention and repair of osmotic blistering in fiberglass boats and for the protection of hulls and rudders.
DESCRIPTION:
HEMPEL'S LIGHT PRIMER 45551 is a two component polyamide adduct cured epoxy high build paint. It forms a hard and tough coating resistant to water and petroleum products.
PHYSICAL CONSTANTS:
Base
Colour / White/11630
Finish: Matte
Volume solids,%: 52 ± 1
Theoretical coverage: 5.2 m² / liter at 100 microns
Flash point: 25 ° C
Specific weight: 1.3 kg/Lt
Touch dry: 3-4 hours at 20°C
Full curing: 7 days at 20°C
V.O.C .: 445 g/Lt
Catalyst
Colour / Reference: Grey / 12170
Finish: Matte
Volume solids,%: 51 ± 1
Theoretical coverage: 5.1 m² / liter at 100 microns
Flash point: 25°C
Specific weight: 1.3 kg / liter
Touch dry: 3-4 hours at 20°C
Full curing: 7 days at 20°C
V.O.C .: 450 g/Lt
The physical constants stated are obtained from the formulas approved by Hempel. They are subject to normal manufacturing tolerances and where stated, to standard deviation according to ISO 3534-1.
PRODUCT APPLICATION DETAILS:
Mixing ratio: Base 45559: Curing agent 95360 2: 1 by volume
Method of application: spray Air Spray HVLP gravity fed conventional suction pressure
Nozzle diameter: 1.6-1.8 mm 1.4-1.8 mm 1.4-1.8 mm 1.4-1.8 mm
Nozzle pressure: 0.7 bar 5 bar 5 bar 5 bar Airless spray Brush
Thinner (max. Vol.): 0845 (5%) 0845 (5%)
Pot life: 2 hours at 20 ° C 6 hours at 20 ° C
Nozzle orifice: .019 "-.023"
Nozzle pressure: 175 bar / 2450 psi (Airless spray data are indicative and subject to adjustment)
Cleaning of tools: HEMPEL'S THINNER 0845 - HEMPEL'S DEGREASER 99611
Recommended thickness, dry: 100 micron
Recommended thickness, wet: 200 microns
Recoating interval: (See APPLICATION INSTRUCTIONS)
