Hempel Light Two-component Primer 45551 2,25Lt White 456COL039
zoom_out_map
chevron_left chevron_right
-25%

Hempel Light Two-component Primer 45551 2,25Lt White 456COL039

Hempel Light is a two-component polyamide adduct cured epoxy high build paint. It forms a hard and tough coating resistant to water and petroleum products.

€79.61 VAT included

€65.25 VAT excluded

€106.14-25%

Il Nostro Negozio

Visit us in our shop

WE ARE AT YOUR DISPOSAL AT OUR POINT OF SALE
Not just online! Come and visit us also in the shop!

In our store you will find a wide selection of selected items and you will be assisted by our specialized staff with over a decade of experience in the nautical sector.
Everything for the boat ... deck equipment, anchoring and mooring, hydraulic and electrical systems, photovoltaics, stainless steel hardware, antifouling and paints, engine spare parts, on-board safety, sailing accessories, nautical instruments, GPS, depth sounders and much more!

We are in San Giorgio di Nogaro in the province of Udine, an important basin, located in the Bassa Friulana, bathed by the Corno river ... a few km from well-known destinations such as Lignano, Grado, Trieste etc.

Nautimarket Europe s.r.l., Via Marittima 17, 33058 San Giorgio di Nogaro (UD) Italy

Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)

MORE INFORMATION

Pack of 2.25lt. White.

LIGHT PRIMER
Two-component epoxy primer thick. It forms a hard, tough and resistant to water and petroleum products. Recommended as a primer above and below the waterline for boats made of aluminium , glassfibre, plywood, steel and steel. Also suitable for prevention and repair of osmotic blistering in glass fibre reinforced polyester and for the protection of keels and rudders.

DESCRIPTION:
HEMPEL'S LIGHT PRIMER 45551 is a two-component polyamide adduct cured epoxy high build paint. It forms a hard and tough coating resistant to water and petroleum products.

RECOMMENDED USE:
Suitable on glass fibre, steel, aluminium and plywood. For interior and exterior use above and below the waterline.

PHYSICAL CONSTANTS:
Base
Colour / Reference: White / 11630
Finish: Matte
Volume solids,%: 52 ± 1
Theoretical coverage: 5.2 m² / liter at 100 microns
Flash point: 25 ° C
Specific weight: 1.3 kg / liter
Touch dry: 3-4 hours at 20 ° C
Full curing: 7 days at 20 ° C
V.O.C .: 445 g / liter
Catalyst
Colour / Reference: Grey / 12170
Finish: Matte
Volume solids,%: 51 ± 1
Theoretical coverage: 5.1 m² / liter at 100 microns
Flash point: 25 ° C
Specific weight: 1.3 kg / liter
Touch dry: 3-4 hours at 20 ° C
Full curing: 7 days at 20 ° C
V.O.C .: 450 g / liter
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are subject to normal manufacturing tolerances and where stated, to standard deviation according to ISO 3534-1.

APPLICATION DETAILS:
Mixing ratio: Base 45559: Curing agent 95360 2: 1 by volume
Method of application: spray Air Spray HVLP gravity fed conventional suction pressure
Nozzle diameter: 1.6-1.8 mm 1.4-1.8 mm 1.4-1.8 mm 1.4-1.8 mm
Nozzle pressure: 0.7 bar 5 bar 5 bar 5 bar Airless spray Brush
Thinner (max. Vol.): 0845 (5%) 0845 (5%)
Pot life: 2 hours at 20 ° C 6 hours at 20 ° C
Nozzle orifice: .019 "-.023"
Nozzle pressure: 175 bar / 2450 psi (Airless spray data are indicative and subject to adjustment)
Cleaning of tools: HEMPEL'S THINNER 0845 - HEMPEL'S DEGREASER 99611
Suggested thickness, dry: 100 micron
Suggested thickness, wet: 200 microns
Recoat interval: (See APPLICATION INSTRUCTIONS)
Surface preparation, application conditions, and the subsequent and previous coats.

Hempel
456COL039
5709516006579