12V 100W PREMIUM Flexible Solar Kit 15A MPPT SmartSolar Charger Cable Kit

12V 100W Semi-Flexible Solar Kit with SmartSolar 15A MPPT Charger + Cable Kit

12V 100W Photovoltaic Kit complete with PREMIUM ETFE-AL V2 100W semi-flexible photovoltaic module, SmartSolar MPPT 75/15 15A 12/24V Solar Charge Controller and Solar Cable Kit 2x5m-4mmq with F/M MC4 connectors for stand-alone PV sy-stems, remote houses, camper vans, boats, industrial applications, lighting systems, road signs, TVCC systems and much more.
The kit is made by:
1 - PREMIUM ETFE-AL V2 100W Flexible monocrystalline Photovoltaic Module #OF018425;
1 - Victron Energy SmartSolar MPPT 75/15 15A 12/24V Solar Charge Controller #UF21675D;
1 - Solar Cable Kit 2x5m-4mmq with F/M MC4 connectors #N151230750280.

1 - PREMIUM ETFE-AL V2 100W Flexible monocrystalline PV module

The Offgridtec ETFE-AL V2 100W semi-flexible solar panel (MPN 018425) combines an innovative aluminum and ETFE construction with high-efficiency monocrystalline solar cells.
With a module voltage of 23V, this solar panel is a versatile solution for a wide range of off-grid applications. Its durable ETFE coating, weather-resistant construction, and semi-flexible design make it particularly suitable for motorhomes, campervans, boats, yachts, and mobile solar systems.
The V2 is the improved version of the previous ETFE-AL 100W solar panel (MPN 011045). It features upgraded solar cells and advanced 11-busbar technology, designed to improve light absorption and reduce power losses under partial shading conditions.

Key Features
Rated power: 100 Wp
High-efficiency monocrystalline solar cells
Cell efficiency up to 22.3%
Double-layer ETFE front surface
Improved slip resistance
Walkable surface
High light transmission for improved long-term energy yield
Durable ETFE surface for protection against hail
Saltwater resistant, ideal for marine applications
Advanced 11-busbar technology
2 bypass diodes to minimize power losses under partial shading
Integrated aluminum backsheet
Semi-flexible design: up to 10° bending along the long side
12-month warranty

Double-Layer ETFE Construction
The front of the module features two superimposed ETFE layers, providing excellent protection for the solar cells while ensuring high light transmission over many years of use.
The improved structure of the outer ETFE layer significantly increases slip resistance, making the panel walkable.
Compared with conventional coatings used on flexible solar panels, ETFE maintains its transparency more effectively over time, reducing clouding and helping preserve the panel's long-term energy output.
The durable ETFE front surface also provides strong protection against hail and is fully resistant to saltwater, making the panel particularly suitable for marine environments.
The integrated aluminum backsheet adds structural stability and helps reduce the risk of cell cracking caused by improper handling or installation.

Advanced 11-Busbar Technology
The panel uses modern 11-busbar technology, with eleven conductive tracks responsible for efficiently collecting and transferring the electrical current generated by the solar cells.
This configuration provides reliable current flow even at higher loads while helping to minimize heat-related losses.
The efficient distribution of electrical power contributes to improved module performance, higher overall efficiency, and optimized energy yield.

High-Efficiency Monocrystalline Solar Cells
Monocrystalline solar cells are manufactured using a uniform single-crystal structure, allowing sunlight to be converted into electrical energy with high efficiency.
Compared with other photovoltaic technologies, monocrystalline cells offer a higher power density, making them especially suitable for installations where available surface area is limited.
The cells used in the ETFE-AL V2 achieve an efficiency of up to 22.3%, delivering excellent performance in a compact format.

Technical Specifications
Maximum power (Pmax): 100 Wp
Voltage at maximum power (Vmp): 23.9 V
Current at maximum power (Imp): 4.19 A
Open-circuit voltage (Voc): 28 V
Short-circuit current (Isc): 4.39 A
Maximum system voltage: 200 V
Cell efficiency: 22.3%
Cell technology: Monocrystalline
Busbar technology: 11 busbars
Bypass diodes: 2 integrated
Material: Aluminum / ETFE
Dimensions: 980 × 580 × 4 mm
Weight: 3.44 kg
Operating temperature: -40°C to +85°C
Walkable: Yes
Maximum bending: 10° along the long side
Saltwater resistant: Yes
Warranty: 12 months

1 - Victron Energy SmartSolar MPPT 75/15 15A 12/24V Solar Charge Controller

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
MPPT: Ultra Fast Maximum Power Point Tracking
By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.
Remote Monitoring and Control
Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the  GlobalLink 520.
Load output
The intelligent Load output function prevents damage caused by running batteries 'flat'. You can configure the voltage at which SmartSolar disconnects a load - thereby preventing excessive drain on your batteries. And here's the clever bit: SmartSolar will attempt a 100% recharge every day. If it can't - during periods of poor weather - it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery.
Technical Specifications:
- Battery voltage (auto select): 12/24V;
- Rated charging current: 15A;
- Nominal PV power, 12V/24V: 220/440W;
- Maximum PV open circuit voltage: 75V;
- Max PV short-circuit current 2: 15A;
- Automatic load disconnect: Yes;
- Peak efficiency: 98%;
- Self-consumption - load ON: 12 V: 19 mA 24 V: 16 mA;
- Self-consumption - load OFF: 12 V: 10 mA 24 V: 8 mA;
- Charging voltage - absorption: 14.4V/28.8V;
- Charging voltage - float: 13.8V/27.6V;
- Charging algorithm: Multi-phase adaptive;
- Temperature compensation: -16 mV/°C or -32 mV/°C;
- Max continuous charge current: 15A;
- Low voltage load disconnect: 11.1V / 22.2V / 44.4V or 11.8V / 23.6V / 47.2V or Battery Life algorithm;
- Low voltage load reconnect: 13.1V / 26.2V / 52.4V or 14V / 28V / 56V or Battery Life algorithm;
- Protection: Output short circuit/Over temperature;
- Operating temperature: From -30 to + 60°C (full rated output up to 40°C);
- Humidity: 95%, non-condensing;
- Color: Blue (RAL 5012);
- Power terminals: 6mmq/AWG10;
- Protection category: IP 43 (electronic components), IP22 (connection area);
- Weight: 0.5 kg;
- Size: 100x113x40 mm;
- Safety: EN/IEC 62109-1, UL 1741, CSA C22.2.

1 - Solar Cable Kit 2x5m-4mmq with F/M MC4 connectors

Cable kit made of black 4 mm² 5 meter photovoltaic cable, red 4 mm² 5 meter photovoltaic cable, MC4 female and male connectors. Specifically designed for the creation of quick and safe connections in the field of photovoltaic applications with the most common inverter and junction boxe. They are made with tinned copper contacts and PPO housing. Resistant to mechanical and climatic stress and resistant to UV rays. The cables and connectors are supplied pre-wired.

IMPORTANT NOTE:
The reduced VAT is reserved for PRIVATE INDIVIDUALS, end users and qualified photovoltaic and thermal energy installers or heat production INSTALLED IN ITALY. In case you do not have the right to the tax deduction (DEALERS) kindly contact us in advance so that an invoice with 22% VAT can be issued as per the law in force. In the absence of receipt of the declaration the order cannot be shipped as a copy of the VAT declaration form must by law be attached to the company invoice. The declaration form and ID document must be sent to the email address. 
After purchase, kindly complete and return the VAT declaration form together with a copy of an ID document.