Tubes Bases and fittings for pulpits

90° Nylon T-fitting for rail with D.22 mm

90° Nylon base for handrails with tube D.22 mm. Length 74 mm. Width 39 mm.

60° Nylon T-fitting for rails with D.22 mm

Chromium-plated cap made of ABS for end cap tubes with external diameter 22 mm, internal tube diameter 20 mm.

60° Nylon base for handrails with tube D.22 mm

White Round polyethylene underplate. External Ø 50.5mm. Inside Ø 46.5mm. For bases OS4141230. Pack of 10 pieces.

Chromium-plated cap made of ABS for end cap tubes with external diameter 25 mm, internal diameter of cap 22,5 mm.

Light stainless steel AISI 316 left inclined tee at 60°with rivet hole. For tube D.22 mm.

Light stainless steel AISI 316 right inclined tee at 60°with rivet hole. For tube D.22 mm.

Light stainless steel AISI 316 rectangular base at 60°with rivet hole. For tube D.22 mm.

Light stainless steel AISI 316 round base at 90°with rivet hole. For tube D.22 mm.

Light stainless steel AISI 316 rectangular base at 90°with rivet hole. For tube D.22 mm.

Light stainless steel AISI 316 round base at 60°with rivet hole. For tube D.22 mm.

Light stainless steel AISI 316 inclined tee at 90° with rivet hole. For tube D.22 mm.

Light stainless steel AISI 316 rectangular base at 90° with rivet hole. For tube D.25 mm.

Light stainless steel AISI 316 rectangular base at 60°with rivet hole. For tube D.25 mm.

Light stainless steel AISI 316 round base at 90° with rivet hole. For tube D.25 mm.

Light stainless steel AISI 316 round base at 60° with rivet hole. For tube D.25 mm.

Light stainless steel AISI 316 right inclined tee at 60° with rivet hole. For tube D.25 mm.

Light stainless steel AISI 316 tee at 90° with rivet hole. For tube D.25 mm.

Light stainless steel AISI 316 left inclined tee at 60° with rivet hole. For tube D.25 mm.

White polyethylene underplate for moulded pulpit sockets, pressed light steel version. D.57.4 mm

Rectangular underplates made of white polyethylene designed for moulded pulpit sockets - D.63,8x49

Stainless steel round base at 45°. Tube D.22 mm.

Pulpit joint made of anodized mirror polished aluminium. Round version. Pipe 30mm. Angle 60°.

Pulpit joint made of anodized mirror polished aluminium. Round version. Pipe 30mm. Angle 90°.

Pulpit joint made of anodized mirror polished aluminium. T version. Pipe 30mm. Angle 90°.

Pulpit joint made of anodized mirror polished aluminium. T version. Pipe 30mm. Angle 60°.

Light stainless steel AISI 316 inclined tee at 60° with rivet hole. For tube D.25 mm.

Stainless steel AISI 316 corner at 140° for tube D.22 mm with allen screw.

Stainless steel AISI 316 corner with 3 lines. For tube D.25 mm with allen screw.

Stainless steel AISI 316 corner with 3 lines. For tube D.22 mm. Angle 90°.

Stainless steel AISI 316 round base at 60° with allen screw. For tube D.22 mm.

60° inclined round base in AISI 316 stainless steel, designed for Ø25mm pipes with Ø71mm flange.

Stainless steel AISI 316 round base at 90° with allen screw. For tube D.25 mm.

Stainless steel AISI 316 round base at 90° with allen screw. For tube D.22 mm.

Stainless steel rectangular base at 45°. Tube D.22 mm.

60° rectangular base in mirror-polished 316 stainless steel for 22mm tube, made of thick micro-casting, base 75x42mm.

Stainless steel AISI 316 rectangular base at 90° with allen screw. For tube D.22 mm.

60° rectangular base in mirror-polished 316 stainless steel for 25mm tube, made of thick micro-casting, base 82x48mm.

Stainless steel AISI 316 rectangular base at 90° with allen screw. For tube D.25 mm.

Compact handrail bracket made of mirror-polished stainless steel. Versione: Central. Height 48 mm. For tube Ø22 mm.

Compact handrail bracket made of mirror-polished stainless steel. Versione: Central. Height 57 mm. For tube Ø25 mm.

Compact handrail bracket made of mirror-polished stainless steel. Versione: Right and left terminal. Height 48 mm. For tube Ø22 mm.