Home
Subcategories
There are 277 products.
CFG One-component polyurethane foam Lt 0,75 N730454COL996
CFG One-component polyurethane foam. One-component expanding polyurethane foam, easy and quick to use suitable for construction and restoration sector. Adheres to all materials. Unit size Lt 0,75
€10.50
€11.66
CRC Silicone Spray 250ml Silicone oil N730454LUB007
CRC Silicone Spray 250ml Silicone oil. Water-repellent, anti-adhesive, lubricates, protects metals and rubber, electrical insulator. Unalterable, inert, ecological.
€10.62
€11.80
CRC Marine 6-66 400ml Anti-corrosive for salty environments N730454LUB005
CRC Marine 6-66. Anti-corrosive for salty environments. Stops the corrosive process in progress and prevents new attacks from showing up, in particular if triggered by salts which are typical of a marine environment.
€13.81
€15.35
CRC Marine 6-66 100ml Protective Anticorrosion Unblocks Cleans Lubricates N730454LUB003
CRC Marine 6-66 100ml anti-corrosive for salty environments. Specific protective against the corrosive and short-circuiting action of salty atmospheres. Idroespellente. Unblock, cleanse and lubricate.
€6.35
€7.05
CRC SP 400 Corrosion Inhibitor Outdoors and Indoors 250ml N730454LUB017
CRC SP 400. Forms a thick amber coloured waxy film, touch dry that acts as long lasting corrosion inhibitor on metals, for interior and exterior application. 250ml.
€14.76
€16.40
CRC Teflub PTFE antiadhesive lubricant 400ml N730454LUB015
CRC PTFE antiadhesive lubricant, water-repellent, dry, polytetrafluoroethylene based, it does not retain dust, it does not form sludge and it does not stain. Unit size 400 ml.
€31.74
€35.27
CRC Contact cleaner 250ml Reactivating Detergent for Contacts N730454LUB025
"CRC - Contact Cleaner Detergent.
Pure solvent and detergent for highly sensitive electronic equipment.
"
Pure solvent and detergent for highly sensitive electronic equipment.
"
€16.58
€18.42
Emergency signals kit for navigation up to 3 miles N93455609300
Emergency signals kit for navigation up to 3 miles: 2 hand-held flares and 1 smoke signal.
€53.00
Orange Horseshoe lifebuoy Ø 35x60cm N92955104210
Horseshoe lifebuoy conforming to Ministerial Decree 385/99. Orange. Ø 35x60cm. Made of orange polyethylene filled with polyurethane foam. It conforms to Ministerial Decree 385/99 for pleasure boating.
€65.88
LED Sirius light buoyant with lithium batteries N92455804185
LED Sirius light buoyant with lithium batteries.
€27.78
€30.87
Marco Smile SM1 12V 5A 400Hz 108dB Inside mounted Electromagnetic Horn N53213201102
Marco Smile SM1 12V 5A 400Hz 108 dB at 1m Inside mounted electromagnetic horn with white plastic grill, loud sound and marine tone for small rubber, dinghies and sailing sailboats. Size 90x114x117mm.
€23.83
€26.47
Marco Shark SK1/C 12V 5A 400Hz 108dB Chromed Electromagnetic Horn N53213201109
Marco Shark SK1/C 12V 5A 400Hz 108dB Electromagnetic horn for small boats, in chromed ASA and mounting bracket in AISI 304 stainless steel for easy installation, dimensions 100x141x98mm.
€50.18
€55.75
Marco Shark SK1 12V 5A 400Hz 108dB ABS White Electromagnetic Horn N53213201103
Marco Shark SK1 12V 5A 400Hz 108dB Electromagnetic horn for small boats, in white ASA and mounting bracket in AISI 304 stainless steel for easy installation, dimensions 100x141x98mm.
€32.72
€36.36
Marco EM1/2 24V 8A 370/320Hz Set Stainless Steel Electromagnetic Horn 13206013
EM1/2 24V 8A 370/320Hz Set electromagnetic horn with stainless steel trumpet Marco 13206013
€182.76
€261.08
Marco EM1/2 12V 10A 370/320Hz Set Stainless Steel Electromagnetic Horn 13206012
EM1/2 12V 10A 370/320Hz Set electromagnetic horn with stainless steel trumpet Marco 13206012
€177.63
€253.76
PW2-BC signalling whistle 24V 20A 315Hz Hose 8/6mm Ø200x438x210mm MC15000213
Approved signalling whistle PW2-BC. 24V. Consumption 20A. 315Hz. dB (1/3 ott) (1m) >120. Hose 8/6mm. Size: Ø200x438x210mm.
€536.31
€766.16
Emergency signals kit for navigation without limits N93455609307
Emergency signals kit for navigation without limits.
€193.00
Emergency signals kit for navigation up to 6-12-50 miles N93455609305
Emergency signals kit for navigation up to 6-12-50 miles, 2 red hand flares, 2 red parachute flares and 2 buoyant orange smoke signals.
€147.00
MZ ELECTRONIC StainleStainless Steel SteelUP Electric Foot Switch N12702001561
Electric foot switch allows the control of any kind of windlass, by applying pressure on it with foot. It operates both 12V and 24V with a maximum 5A current.
€23.04
€25.60
MZ ELECTRONIC StainleStainless Steel SteelDown Electric Foot Switch N12702001560
Electric foot switch allows the control of any kind of windlass, by applying pressure on it with foot. It operates both 12V and 24V with a maximum 5A current.
€23.48
€26.08
Chromed braStainless Steel rowlock Ø14mm Opening 58mm 40x76mm N30610511813
Chromed brass rowlock Ø14 mm, Opening 58mm, 40x76mm.
€12.52
€13.91
Italwinch CLS Vertical Windlass 12V 700W Stainless Steel 6mm Chain
Italwinch CLS Vertical Windlass 12V 700W Stainless Steel 6mm ChainStainless steel vertical windlass. Available in low profile, with different drives and recommended for boats up to 13 mt. SMART use the 6mm chain and is equipped with rope tensioner. Comes with built-in chain counter sensor. Without Drum.
€649.00
€1,107.76
Italwinch Smart V windlaStainless Steel 500 W 12 V - 6 mm ISO low OS0240201
Italwinch Smart V windlass 500 W 12 V - 6 mm ISO low
€997.72
€1,489.13
Italwinch Smart V windlaStainless Steel 800 W 12 V - 8 mm ISO low OS0240203
Italwinch Smart V windlass 800 W 12 V - 8 mm ISO low
€1,035.17
€1,545.03
Italwinch Obi 500W 12V Anchor Windlass without Drum for 6mm Chain
Italwinch Obi 500W 12V Anchor Windlass without Drum for 6mm Chain.
Italwinch Obi500 windlass without drum. 500W 12V motor. Average consumption 60A. 6mm chain gypsy. Maximum pulling capacity 630kg. Working load 90kg. Weight 8.2kg.
Horizontal-axis winch in anodized anticorodal aluminum. The OBI 500 can use 6mm or 8mm diameter chain, depending on the model, and is equipped with a line tensioner system. With various motorizations, it is recommended for boats up to 9m.
Italwinch Obi500 windlass without drum. 500W 12V motor. Average consumption 60A. 6mm chain gypsy. Maximum pulling capacity 630kg. Working load 90kg. Weight 8.2kg.
Horizontal-axis winch in anodized anticorodal aluminum. The OBI 500 can use 6mm or 8mm diameter chain, depending on the model, and is equipped with a line tensioner system. With various motorizations, it is recommended for boats up to 9m.
€619.00
€1,058.96
Italwinch Obi windlaStainless Steel 1000 W - 12 V with drum 8 mm gypsy OS0240805
Italwinch Obi windlass 1000 W - 12 V with drum 8 mm gypsy
€1,571.03
€2,344.82
Italwinch Obi windlaStainless Steel 1500 W - 12 V with drum 10 mm gypsy OS0240809
Italwinch Obi windlass 1500 W - 12 V with drum 10 mm gypsy
€1,651.28
€2,464.60
Italwinch Obi windlaStainless Steel 1500 W - 12 V with drum 8 mm gypsy OS0240808
Italwinch Obi windlass 1500 W - 12 V with drum 8 mm gypsy
€1,651.28
€2,464.60
Italwinch Obi windlaStainless Steel 1500 W - 24 V with drum 8 mm gypsy OS0240810
Italwinch Obi windlass 1500 W - 24 V with drum 8 mm gypsy
€1,694.08
€2,528.47
Italwinch Devon windlaStainless Steel 1000 W - 12 V gypsy 8 mm OS0240901
Italwinch Devon windlass 1000 W - 12 V gypsy 8 mm
€1,651.28
€2,464.60
Italwinch Obi windlaStainless Steel 1500 W - 24 V with drum 10 mm gypsy OS0240811
Italwinch Obi windlass 1500 W - 24 V with drum 10 mm gypsy
€1,694.08
€2,528.47
Italwinch Devon windlaStainless Steel 1000 W - 24 V gypsy 8 mm OS0240903
Italwinch Devon windlass 1000 W - 24 V gypsy 8 mm
€1,675.36
€2,500.54
Italwinch Devon windlaStainless Steel 1500 W - 12 V gypsy 8 mm OS0240904
Italwinch Devon windlass 1500 W - 12 V gypsy 8 mm
€1,686.05
€2,516.49
Italwinch Devon windlaStainless Steel 1500 W - 24 V gypsy 8 mm OS0240906
Italwinch Devon windlass 1500 W - 24 V gypsy 8 mm
€1,715.48
€2,560.41
Italwinch Devon windlaStainless Steel 1500 W - 12 V gypsy 10 mm OS0240905
Italwinch Devon windlass 1500 W - 12 V gypsy 10 mm
€1,686.05
€2,516.49
Italwinch Devon windlaStainless Steel 1500 W - 24 V gypsy 10 mm OS0240907
Italwinch Devon windlass 1500 W - 24 V gypsy 10 mm
€1,715.48
€2,560.41
Italwinch Achill 500W 12V Tender Winch (Belt Not Included)
Italwinch Achill Tender Winch, 500W 12V (strap not included)
Tender winch for recovery with anodized aluminum drum pre-installed for strap and snap hook attachment.
Maximum instantaneous pull 650kg. Maximum working load 90kg. Current draw at working load 60A. Maximum recovery speed 12m/min. Maximum strap length 7.5m.
Tender winch for recovery with anodized aluminum drum pre-installed for strap and snap hook attachment.
Maximum instantaneous pull 650kg. Maximum working load 90kg. Current draw at working load 60A. Maximum recovery speed 12m/min. Maximum strap length 7.5m.
€599.00
€1,029.68
F-LINE S Pop-Up mirror polished Stainless Steel mooring cleat L.180mm MT1114718
High quality Pop-Up mirror polished stainless steel mooring cleat. Just simply apply pressure with one hand. Inner hidden stud mount. Length 180mm. Width 37mm.
€149.82
€187.27
F-LINE S Pop-Up mirror polished Stainless Steel mooring cleat L.350mm MT1114735
High quality Pop-Up mirror polished Stainless Steel mooring cleat. Equipped with a soft and precise recessed mechanism, just simply apply pressure with one hand. Length 350mm. Width 60mm.
€539.73
€674.66
F-LINE S Pop-Up mirror polished Stainless Steel mooring cleat L.260mm MT1114726
High quality Pop-Up mirror polished Stainless Steel mooring cleat. Equipped with a soft and precise recessed mechanism, just simply apply pressure with one hand. Length 260mm. Width 50mm.
€328.42
€410.53
Chrome plated brass straight cleat L. 115mm N11102500231
Straight cleat made of chrome plated brass. Base 55x40 mm. On-centre spacing D.4 - 45x30 mm. Length 115 mm.
€12.63
€13.30
Chrome plated brass straight cleat L. 150mm N11102500230
Straight cleat in chrome plated brass. Base 70x55 mm. On-centre spacing D.5 - 53x40 mm. Length 150 mm.
€18.01
€20.01
Chrome plated brass straight cleat L.200 mm N11102500229
Straight cleat in chrome plated brass. Base 90x65 mm. On-centre spacing D.5 - 70x50 mm. Length 200 mm.
€20.01
€25.01
Chromed brass flagpole holder 14mm for 20/25mm pipe N30112501975
Chromed brass flagpole holder for pushpit or handrail mounting. Clamp fastening. for pushpit or handrail mounting. For flagpole with diameter 14 mm. Pipe D.20/25 mm.
€15.04
€16.71






