Home

Subcategories

Products

Active filters

Epifanes Clear Varnish Lt 1 470COL108
-10%
Epifanes Clear Varnish Lt 1 470COL108
High gloss marine varnish for use on wood, containing an exceptionally high percentage of solids and U.V. filters. Recommended for interior or exterior use on new or bare wood above the waterline as well as maintenance finish on existing varnish systems.
€46.67
€51.85
Epifanes Spray Thinner 1 Lt 470COL110
-10%
Epifanes Spray Thinner 1 Lt 470COL110
Thinner for spray applications of one-component primers, paints and varnishes. Also highly suited for degreasing wood and existing paint and varnish layers. 1Lt.
€21.74
€24.16
Epifanes Brush Thinner 1 Lt 470COL109
-10%
Epifanes Brush Thinner 1 Lt 470COL109
A high quality thinner for brushing or rolling most one-component primers, paints and varnishes. The double distillation of this thinner provides maximum purity. 1Lt.
€19.87
€22.08
Epifanes Wood Finish Matte 1Lt N71447000003
-10%
Epifanes Wood Finish Matte 1Lt N71447000003
Wood Finish Matte, the companion product to Wood Finish Gloss, offers a no sanding solution in a matte finish. Its a one-component varnish alternative based on urethane alkyd resins and tung oil and contains U.V. absorbers.
€55.23
€61.37
Epifanes Wood Finish Gloss 1Lt N71447000002
-10%
Epifanes Wood Finish Gloss 1Lt N71447000002
Varnish-like gloss finish with breathing properties containing UV filter. Especially suited on oily, resinous tropical types of wood and American pine. As alternative for the continuous maintenance of impregnating woodoil systems.
€51.61
€57.34
Forespar Sta-Plug form fitting emergency plug N91556205710
Forespar Sta-Plug form fitting emergency plug N91556205710
Sta-Plug is Forespar’s new form fitting emergency plug. A soft cone shaped design allows it to easily fill the irregular shapes of hull impact breaches, as well as any round hole leak from a hose or through-hull.
€43.92
Italwinch CLS Vertical Windlass 12V 700W Stainless Steel 6mm Chain
-41.41%
Italwinch CLS Vertical Windlass 12V 700W Stainless Steel 6mm Chain
Italwinch CLS Vertical Windlass 12V 700W Stainless Steel 6mm ChainStainless steel vertical windlass. Available in low profile, with different drives and recommended for boats up to 13 mt. SMART use the 6mm chain and is equipped with rope tensioner. Comes with built-in chain counter sensor. Without Drum.
€649.00
€1,107.76
Italwinch Obi 500W 12V Anchor Windlass without Drum for 6mm Chain
-41.55%
Italwinch Obi 500W 12V Anchor Windlass without Drum for 6mm Chain
Italwinch Obi 500W 12V Anchor Windlass without Drum for 6mm Chain.
Italwinch Obi500 windlass without drum. 500W 12V motor. Average consumption 60A. 6mm chain gypsy. Maximum pulling capacity 630kg. Working load 90kg. Weight 8.2kg.
Horizontal-axis winch in anodized anticorodal aluminum. The OBI 500 can use 6mm or 8mm diameter chain, depending on the model, and is equipped with a line tensioner system. With various motorizations, it is recommended for boats up to 9m.
€619.00
€1,058.96
Italwinch Achill 500W 12V Tender Winch (Belt Not Included)
-41.83%
Italwinch Achill 500W 12V Tender Winch (Belt Not Included)
Italwinch Achill Tender Winch, 500W 12V (strap not included)
Tender winch for recovery with anodized aluminum drum pre-installed for strap and snap hook attachment.
Maximum instantaneous pull 650kg. Maximum working load 90kg. Current draw at working load 60A. Maximum recovery speed 12m/min. Maximum strap length 7.5m.
€599.00
€1,029.68
Air vent H230 N30311602497
-10%
Air vent H230 N30311602497
Air vent made of white flexible PVC, swivel type with base and cap. Standard profile. Neck D.70mm. Height 230mm. Base D.110mm. Width 110mm.
€24.06
€26.73