Home
Subcategories
There are 122 products.
MZ ELECTRONIC StainleStainless Steel SteelUP Electric Foot Switch N12702001561
Electric foot switch allows the control of any kind of windlass, by applying pressure on it with foot. It operates both 12V and 24V with a maximum 5A current.
€23.04
€25.60
Valid while stocks last, expires in:
MZ ELECTRONIC StainleStainless Steel SteelDown Electric Foot Switch N12702001560
Electric foot switch allows the control of any kind of windlass, by applying pressure on it with foot. It operates both 12V and 24V with a maximum 5A current.
€23.48
€26.08
Valid while stocks last, expires in:
Italwinch CLS Vertical Windlass 12V 700W Stainless Steel 6mm Chain
Italwinch CLS Vertical Windlass 12V 700W Stainless Steel 6mm ChainStainless steel vertical windlass. Available in low profile, with different drives and recommended for boats up to 13 mt. SMART use the 6mm chain and is equipped with rope tensioner. Comes with built-in chain counter sensor. Without Drum.
€649.00
€1,107.76
Valid while stocks last, expires in:
Italwinch Smart V windlaStainless Steel 500 W 12 V - 6 mm ISO low OS0240201
Italwinch Smart V windlass 500 W 12 V - 6 mm ISO low
€997.72
€1,489.13
Valid while stocks last, expires in:
Italwinch Smart V windlaStainless Steel 800 W 12 V - 8 mm ISO low OS0240203
Italwinch Smart V windlass 800 W 12 V - 8 mm ISO low
€1,035.17
€1,545.03
Valid while stocks last, expires in:
Italwinch Obi 500W 12V Anchor Windlass without Drum for 6mm Chain
Italwinch Obi 500W 12V Anchor Windlass without Drum for 6mm Chain.
Italwinch Obi500 windlass without drum. 500W 12V motor. Average consumption 60A. 6mm chain gypsy. Maximum pulling capacity 630kg. Working load 90kg. Weight 8.2kg.
Horizontal-axis winch in anodized anticorodal aluminum. The OBI 500 can use 6mm or 8mm diameter chain, depending on the model, and is equipped with a line tensioner system. With various motorizations, it is recommended for boats up to 9m.
Italwinch Obi500 windlass without drum. 500W 12V motor. Average consumption 60A. 6mm chain gypsy. Maximum pulling capacity 630kg. Working load 90kg. Weight 8.2kg.
Horizontal-axis winch in anodized anticorodal aluminum. The OBI 500 can use 6mm or 8mm diameter chain, depending on the model, and is equipped with a line tensioner system. With various motorizations, it is recommended for boats up to 9m.
€619.00
€1,058.96
Valid while stocks last, expires in:
Italwinch Obi windlaStainless Steel 1000 W - 12 V with drum 8 mm gypsy OS0240805
Italwinch Obi windlass 1000 W - 12 V with drum 8 mm gypsy
€1,571.03
€2,344.82
Valid while stocks last, expires in:
Italwinch Obi windlaStainless Steel 1500 W - 12 V with drum 10 mm gypsy OS0240809
Italwinch Obi windlass 1500 W - 12 V with drum 10 mm gypsy
€1,651.28
€2,464.60
Valid while stocks last, expires in:
Italwinch Obi windlaStainless Steel 1500 W - 12 V with drum 8 mm gypsy OS0240808
Italwinch Obi windlass 1500 W - 12 V with drum 8 mm gypsy
€1,651.28
€2,464.60
Valid while stocks last, expires in:
Italwinch Obi windlaStainless Steel 1500 W - 24 V with drum 8 mm gypsy OS0240810
Italwinch Obi windlass 1500 W - 24 V with drum 8 mm gypsy
€1,694.08
€2,528.47
Valid while stocks last, expires in:
Italwinch Devon windlaStainless Steel 1000 W - 12 V gypsy 8 mm OS0240901
Italwinch Devon windlass 1000 W - 12 V gypsy 8 mm
€1,651.28
€2,464.60
Valid while stocks last, expires in:
Italwinch Obi windlaStainless Steel 1500 W - 24 V with drum 10 mm gypsy OS0240811
Italwinch Obi windlass 1500 W - 24 V with drum 10 mm gypsy
€1,694.08
€2,528.47
Valid while stocks last, expires in:
Italwinch Devon windlaStainless Steel 1000 W - 24 V gypsy 8 mm OS0240903
Italwinch Devon windlass 1000 W - 24 V gypsy 8 mm
€1,675.36
€2,500.54
Valid while stocks last, expires in:
Italwinch Devon windlaStainless Steel 1500 W - 12 V gypsy 8 mm OS0240904
Italwinch Devon windlass 1500 W - 12 V gypsy 8 mm
€1,686.05
€2,516.49
Valid while stocks last, expires in:
Italwinch Devon windlaStainless Steel 1500 W - 24 V gypsy 8 mm OS0240906
Italwinch Devon windlass 1500 W - 24 V gypsy 8 mm
€1,715.48
€2,560.41
Valid while stocks last, expires in:
Italwinch Devon windlaStainless Steel 1500 W - 12 V gypsy 10 mm OS0240905
Italwinch Devon windlass 1500 W - 12 V gypsy 10 mm
€1,686.05
€2,516.49
Valid while stocks last, expires in:
Italwinch Devon windlaStainless Steel 1500 W - 24 V gypsy 10 mm OS0240907
Italwinch Devon windlass 1500 W - 24 V gypsy 10 mm
€1,715.48
€2,560.41
Valid while stocks last, expires in:
Italwinch Achill 500W 12V Tender Winch (Belt Not Included)
Italwinch Achill Tender Winch, 500W 12V (strap not included)
Tender winch for recovery with anodized aluminum drum pre-installed for strap and snap hook attachment.
Maximum instantaneous pull 650kg. Maximum working load 90kg. Current draw at working load 60A. Maximum recovery speed 12m/min. Maximum strap length 7.5m.
Tender winch for recovery with anodized aluminum drum pre-installed for strap and snap hook attachment.
Maximum instantaneous pull 650kg. Maximum working load 90kg. Current draw at working load 60A. Maximum recovery speed 12m/min. Maximum strap length 7.5m.
€599.00
€1,029.68
Valid while stocks last, expires in:
Stainless steel joint eye with ring Screw 12mm N61542102833
Joint eye with ring made of 304 stainless steel. Lenght 144 mm. Ring D.60 mm. Screw 12 mm.
€29.28
€36.60
Stainless steel joint eye with ring Screw 8mm N61542102831
Joint eye with ring made of 304 stainless steel. Lenght 90 mm. Ring D.35 mm. Screw 6 mm.
€14.27
€15.86
RIVA RI013 Ogiva Zinc Anode for axes and propellers Ø14mm 51xh59mm N80605430260
RIVA RI013 Ogiva Zinc Anode for axes and propellers, Ø14 mm, 51xh59 mm.
€18.00
€36.00
Plate Zinc anodes for flaps and rudders D.130x80mm N80605930239
Plate Zinc anodes for flaps and rudders, dimensions 130x80 mm.
€38.12
€54.46
Plate Zinc anode for flaps and rudders L. 69 mm N80605930240
Plate Zinc anode for flaps and rudders, L. 69 mm.
€35.22
€46.96
Disc Zinc anode for rudder and flaps D.150x25mm 3.3 kg N80606230012
Disc Zinc anode for rudder and flaps. D.150x25mm. 3.3 kg.
€44.21
€88.41
RIVA NC061 FD-5 Zinc Anode for rudders and flaps 112x68xh20mm N80605330308
RIVA NC061 FD-5 Zinc Anode for rudders and flaps 112x68xh20 mm.
€20.80
€26.00
Jabsco 18777-0001K 10 blade impeller D.60mm N82152002208
Last items in stock
Jabsco 10 blade impeller, bronze pin, neoprene impeller. Dimensions as per diagram: A: 60 mm; B: 50 mm; C: 16 mm. Jabsco reference 018 18777 91.
€76.67
€90.19
Jabsco 4568-0001K 12 blade impeller D.57mm N82152002209
Last items in stock
Jabsco 12 blade impeller, bronze pin, neoprene impeller. Dimensions as per diagram: A: 57 mm; B: 31.5 mm; C: 16 mm. Jabsco reference 018 04568 01.
€72.68
€85.51
Jabsco 6 blades impeller 21414-0001B D.32mm N82152002216
Jabsco 6 blades impeller, bronze pin, neoprene impeller. Dimensions as per diagram: A: 32 mm; B: 11.8 mm; C: 8 mm. Jabsco reference 018 21414 91.
€46.50
€54.70
Jabsco 1414-0001B 6 blade impeller D.32mm N82152002215
Jabsco 6 blade impeller, bronze pin, neoprene impeller. Dimensions as per diagram: A: 32mm; B: 12.1mm; C: 8mm. Jabsco reference 018 01414 91.
€42.77
€50.31
Nut A2 UNI5588 DIN934 -M14 N60144507995
Nut A2 UNI5588 DIN934. M14.
€0.95
€1.00
Nut A2 UNI5588 DIN934 M12 N60144507994
Nut A2 UNI5588 DIN934. M12.
€0.69
€0.84
Nut A2 UNI5588 DIN934 M10 N60144507993
Nut A2 UNI5588 DIN934 - M10
€0.49
€0.60
Self locking nut A2 M12 N60144508003
Self locking nut A2 - M12. DIN 985.
€1.07
€1.31
Self locking nut A2 M10 N60144508002
Self locking nut A2 - M10. DIN 985.
€0.64
€0.78
Self locking nut A2 M8 N60144508001
Self locking nut A2 - M8 DIN 985.
€0.32
€0.39
Nut A2 UNI5588 DIN934 M16 N60144507996
Nut A2 UNI5588 DIN934. M16.
€1.19
€1.26
Flat washer A2 UNI1733 14x42mm N60144508059
Flat washer A2 UNI1733 - 14x42mm.
€1.07
€1.31
Cap nut A2 UNI5721 M12 N60144508011
Cap nut A2 UNI5721 - M12. DIN 1587.
€4.41
€5.38
Cap nut A2 UNI5721 M10 N60144508010
Cap nut A2 UNI5721 - M10.
€3.11
€3.79
Flat washer A2 UNI1733 14x56mm N60144508060
Flat washer A2 UNI1733 - 14x56mm.
€2.34
€2.85
Chrystal PV1360 Stove with Sink 600x420mm Left Sink 2 Burner MT1506622
2 burner Tempered Glass top and Stainless Steel 18/8 sink. Complete with safety thermocouples. Size: 600x420mm. Left Sink. Weight 15kg.
€548.54
€731.39
Stainless Steel Hotty Gas Stove 2-2 Burner 440x290mm MT1504050
Stainless Steel Hotty Gas Stove 2 - 2 Burner - 440x290mm
€428.95
€536.19
Stainless Steel Hotty Gas Stove 1-1 Burner 210x290mm MT1504040
Stainless Steel Hotty Gas Stove 1 - 1 Burner. 210x290mm.
€263.03
€328.79
Polished Stainless Steel Burny 3 Flush-in Gas Stove 3 Burners 470x360mm MT1504553
Polished Stainless Steel Burny 3 Flush-in Gas Stove - 3 Burners - 470x360mm
€525.09
€656.36






