Home
Subcategories
There are 148 products.
Yachticon Pura Tank for washing and disinfecting water tank 500ml N70848904793
Product contains no chlorine, suitable for washing and disinfecting water tanks. Removes residues and odours due to the formation of algae and bacteria. 500ml.
€27.21
€33.18
Yachticon Sea Soap Shampoo 300ml N70848904791
Yachticon sea Shampoo is a soap/shampoo to be used both with sea water and fresh water. PH 5.5, biodegradable. It contains special moisturising substances that neutralise the drying action of the sun, wind and sea on hair and skin.
€17.64
Yellow Watertight Case Empty 50x41x20cm N90056004795
Yellow Watertight Case. Size: 50x41x20cm. Empty case.
€54.90
€79.80
MZ ELECTRONIC StainleStainless Steel SteelUP Electric Foot Switch N12702001561
Electric foot switch allows the control of any kind of windlass, by applying pressure on it with foot. It operates both 12V and 24V with a maximum 5A current.
€23.04
€25.60
Valid while stocks last, expires in:
MZ ELECTRONIC StainleStainless Steel SteelDown Electric Foot Switch N12702001560
Electric foot switch allows the control of any kind of windlass, by applying pressure on it with foot. It operates both 12V and 24V with a maximum 5A current.
€23.48
€26.08
Valid while stocks last, expires in:
Italwinch CLS Vertical Windlass 12V 700W Stainless Steel 6mm Chain
Italwinch CLS Vertical Windlass 12V 700W Stainless Steel 6mm ChainStainless steel vertical windlass. Available in low profile, with different drives and recommended for boats up to 13 mt. SMART use the 6mm chain and is equipped with rope tensioner. Comes with built-in chain counter sensor. Without Drum.
€649.00
€1,107.76
Valid while stocks last, expires in:
Italwinch Smart V windlaStainless Steel 500 W 12 V - 6 mm ISO low OS0240201
Italwinch Smart V windlass 500 W 12 V - 6 mm ISO low
€997.72
€1,489.13
Valid while stocks last, expires in:
Italwinch Smart V windlaStainless Steel 800 W 12 V - 8 mm ISO low OS0240203
Italwinch Smart V windlass 800 W 12 V - 8 mm ISO low
€1,035.17
€1,545.03
Valid while stocks last, expires in:
Italwinch Obi 500W 12V Anchor Windlass without Drum for 6mm Chain
Italwinch Obi 500W 12V Anchor Windlass without Drum for 6mm Chain.
Italwinch Obi500 windlass without drum. 500W 12V motor. Average consumption 60A. 6mm chain gypsy. Maximum pulling capacity 630kg. Working load 90kg. Weight 8.2kg.
Horizontal-axis winch in anodized anticorodal aluminum. The OBI 500 can use 6mm or 8mm diameter chain, depending on the model, and is equipped with a line tensioner system. With various motorizations, it is recommended for boats up to 9m.
Italwinch Obi500 windlass without drum. 500W 12V motor. Average consumption 60A. 6mm chain gypsy. Maximum pulling capacity 630kg. Working load 90kg. Weight 8.2kg.
Horizontal-axis winch in anodized anticorodal aluminum. The OBI 500 can use 6mm or 8mm diameter chain, depending on the model, and is equipped with a line tensioner system. With various motorizations, it is recommended for boats up to 9m.
€619.00
€1,058.96
Valid while stocks last, expires in:
Italwinch Obi windlaStainless Steel 1000 W - 12 V with drum 8 mm gypsy OS0240805
Italwinch Obi windlass 1000 W - 12 V with drum 8 mm gypsy
€1,571.03
€2,344.82
Valid while stocks last, expires in:
Italwinch Obi windlaStainless Steel 1500 W - 12 V with drum 10 mm gypsy OS0240809
Italwinch Obi windlass 1500 W - 12 V with drum 10 mm gypsy
€1,651.28
€2,464.60
Valid while stocks last, expires in:
Italwinch Obi windlaStainless Steel 1500 W - 12 V with drum 8 mm gypsy OS0240808
Italwinch Obi windlass 1500 W - 12 V with drum 8 mm gypsy
€1,651.28
€2,464.60
Valid while stocks last, expires in:
Italwinch Obi windlaStainless Steel 1500 W - 24 V with drum 8 mm gypsy OS0240810
Italwinch Obi windlass 1500 W - 24 V with drum 8 mm gypsy
€1,694.08
€2,528.47
Valid while stocks last, expires in:
Italwinch Devon windlaStainless Steel 1000 W - 12 V gypsy 8 mm OS0240901
Italwinch Devon windlass 1000 W - 12 V gypsy 8 mm
€1,651.28
€2,464.60
Valid while stocks last, expires in:
Italwinch Obi windlaStainless Steel 1500 W - 24 V with drum 10 mm gypsy OS0240811
Italwinch Obi windlass 1500 W - 24 V with drum 10 mm gypsy
€1,694.08
€2,528.47
Valid while stocks last, expires in:
Italwinch Devon windlaStainless Steel 1000 W - 24 V gypsy 8 mm OS0240903
Italwinch Devon windlass 1000 W - 24 V gypsy 8 mm
€1,675.36
€2,500.54
Valid while stocks last, expires in:
Italwinch Devon windlaStainless Steel 1500 W - 12 V gypsy 8 mm OS0240904
Italwinch Devon windlass 1500 W - 12 V gypsy 8 mm
€1,686.05
€2,516.49
Valid while stocks last, expires in:
Italwinch Devon windlaStainless Steel 1500 W - 24 V gypsy 8 mm OS0240906
Italwinch Devon windlass 1500 W - 24 V gypsy 8 mm
€1,715.48
€2,560.41
Valid while stocks last, expires in:
Italwinch Devon windlaStainless Steel 1500 W - 12 V gypsy 10 mm OS0240905
Italwinch Devon windlass 1500 W - 12 V gypsy 10 mm
€1,686.05
€2,516.49
Valid while stocks last, expires in:
Italwinch Devon windlaStainless Steel 1500 W - 24 V gypsy 10 mm OS0240907
Italwinch Devon windlass 1500 W - 24 V gypsy 10 mm
€1,715.48
€2,560.41
Valid while stocks last, expires in:
Italwinch Achill 500W 12V Tender Winch (Belt Not Included)
Italwinch Achill Tender Winch, 500W 12V (strap not included)
Tender winch for recovery with anodized aluminum drum pre-installed for strap and snap hook attachment.
Maximum instantaneous pull 650kg. Maximum working load 90kg. Current draw at working load 60A. Maximum recovery speed 12m/min. Maximum strap length 7.5m.
Tender winch for recovery with anodized aluminum drum pre-installed for strap and snap hook attachment.
Maximum instantaneous pull 650kg. Maximum working load 90kg. Current draw at working load 60A. Maximum recovery speed 12m/min. Maximum strap length 7.5m.
€599.00
€1,029.68
Valid while stocks last, expires in:
RIVA RI013 Ogiva Zinc Anode for axes and propellers Ø14mm 51xh59mm N80605430260
RIVA RI013 Ogiva Zinc Anode for axes and propellers, Ø14 mm, 51xh59 mm.
€18.00
€36.00
Plate Zinc anodes for flaps and rudders D.130x80mm N80605930239
Plate Zinc anodes for flaps and rudders, dimensions 130x80 mm.
€38.12
€54.46
Plate Zinc anode for flaps and rudders L. 69 mm N80605930240
Plate Zinc anode for flaps and rudders, L. 69 mm.
€35.22
€46.96
Disc Zinc anode for rudder and flaps D.150x25mm 3.3 kg N80606230012
Disc Zinc anode for rudder and flaps. D.150x25mm. 3.3 kg.
€44.21
€88.41
RIVA NC061 FD-5 Zinc Anode for rudders and flaps 112x68xh20mm N80605330308
RIVA NC061 FD-5 Zinc Anode for rudders and flaps 112x68xh20 mm.
€20.80
€26.00
Chrystal PV1360 Stove with Sink 600x420mm Left Sink 2 Burner MT1506622
2 burner Tempered Glass top and Stainless Steel 18/8 sink. Complete with safety thermocouples. Size: 600x420mm. Left Sink. Weight 15kg.
€548.54
€731.39
Stainless Steel Hotty Gas Stove 2-2 Burner 440x290mm MT1504050
Stainless Steel Hotty Gas Stove 2 - 2 Burner - 440x290mm
€428.95
€536.19
Stainless Steel Hotty Gas Stove 1-1 Burner 210x290mm MT1504040
Stainless Steel Hotty Gas Stove 1 - 1 Burner. 210x290mm.
€263.03
€328.79
Polished Stainless Steel Burny 3 Flush-in Gas Stove 3 Burners 470x360mm MT1504553
Polished Stainless Steel Burny 3 Flush-in Gas Stove - 3 Burners - 470x360mm
€525.09
€656.36
Polished Stainless Steel Burny 2 Flush-in Gas Stove 2 Burners 380x360mm MT1504550
Polished Stainless Steel Burny 2 Flush-in Gas Stove - 2 Burners - 380x360mm
€381.13
€476.41
Polished Stainless Steel Burny 1 Flush-in Gas Stove 1 Burner 320x285mm MT1504540
Polished Stainless Steel Burny 1 Flush-in Gas Stove, width 320 mm, height 30+100 mm, depth 285 mm, weight 2.2 kg, hob-unit burners 1 semi-rapid.
€199.59
€249.49
Chrystal PV1352 Tempered Glass Top Flush-in Stove 3 Burner 420x370mm MT1506603
Chrystal PV1352 Tempered Glass Top Flush-in Stove - 3 Burner - 420x370mm
€487.02
€608.78
Chrystal PV1351 Tempered Glass Top Flush-in Stove 2 Burner 380x280mm MT1506602
Chrystal PV1351 Tempered Glass Top Flush-in Stove - 2 Burner - 380x280mm
€389.42
€486.78
Stainless Steel Hoodiny Flush-in Gas Stove 1 Burner 340mm MT1504651
Stainless Steel Hoodiny Flush-in Gas Stove - 1 Burner - D.340mm
€389.91
€487.39
Flush Mounting Vitroceramic Hob-Unit Stove with 4 electric 220V Hobs 580x510x41Hmm 8.5Kg MT1505855
Flush Mounting Vitroceramic Hob-Unit Stove with 4 electric 220V Hobs - 580x510x41Hmm - 8.5Kg - 1200-1800W
€803.61
€1,148.02
Flush Mounting Vitroceramic Hob-Unit Stove with 2 220V electric Hobs 500x300x41Hmm 7Kg MT1505852
Flush Mounting Vitroceramic Hob-Unit Stove with 2 220V electric Hobs - 500x300x41Hmm - 7Kg - 1200-1700W.
€489.98
€653.31
Stainless steel Column pot stand One clip MT1506681
Stainless steel one clip column pot stand, compatible with all 1-burner gas cooktops.
€72.13
€90.16
Single Pan holder for Hob-Unit Stove MT1506685
Single Pan holder for Hob-Unit Stove
€57.65
€64.05
Western Kit WRD Remote monitoring system with WBM Battery Monitor N52830550097
The WBM is a Battery Monitor which, together with the WRD display, allows you to monitor and manage lead batteries in a careful way, maximizing their useful life. It is compatible with charge controllers equipped with WESTERN BUS (WRM20+, WRM30+).
€471.41
€589.26
Western WRM30+ 12/24V/48V 30A MPPT Charge Controller with RS485 port N52830550102
Western WRM30+ 30A charge controller, 2-channel MPPT Voc 150Vdc algorithm with 12/24 / 48V autodetect, LCD graphic display and twilight function, RS485 port.
€326.48
€408.10
Western WMarine 10 12/24V 10A MPPT Charge Controller N52830550100
Western WMarine10 10A photovoltaic charge controller, MPPT buck-boost algorithm with 12 / 24V autodetect, LCD graphic display and twilight function.
€130.24
€162.80
Western WRM15 DualB-E Charge Controller 12-24V 15A MPPT 2 Outputs Battery N52830550105
15A MPPT Western WRM15 photovoltaic charge controller, dual battery, 12V/24V with remote control by smartphone application.
€212.08
€265.10
Western WRM20+ 12/24V 20A MPPT Charge Controller with RS485 Port N52830550104
Western WRM20+ 20A photovoltaic charge controller, MPPT Voc 100Vdc algorithm with 12/24V autodetect, with a RS-485 communication port that implement WBus protocol, LCD graphic display and twilight function.
€148.72
€185.90






