Home

Subcategories

Active filters

-10%
Jumbo regatta Mark buoy H.320cm FNIP40266
Jumbo regatta Mark buoy . Size when folded cm 100x40x20. Size when inflated cm. 320H, length (triangular base) 200, cylinder diameter (top part of the buoy) 60. Weight 16 kg.
€769.61
€855.12
-10%
Inflatable yellow IOR FNIP61073
Inflatable yellow nylon coated polyurethane IOR, It assures the identification of a man at sea emerging from the water for 198cm and provides a buoyancy of 150N.
€251.01
€278.90
-10%
Rescue Sling White FNIP35713
The clever and exclusive design of the Rescue Sling consists in the retrieval line which is coiled on a reel. Breaking strain of line 400 kg. Breaking strain of flotation belt 700 kg. White.
€152.00
€168.88
-10%
Galvanised steel DC Plough Anchor 16Kg FNIP63717
Galvanised steel plough anchor with high holding power. Recommended for boats up to 18 metres. Weight 16kg. Dimensions: A= 812mm, B= 482mm, C= 362mm, D= 19mm, E= 42mm, F= 12,5mm, G= 44mm, H= 339mm.
€277.79
€308.66
-10%
Galvanised steel DC Plough Anchor 10Kg FNIP63716
Galvanised steel plough anchor with high holding power. For boats up to 15 metri. Weight 10Kg. Dimensions: A= 695mm, B= 410mm, C=310mm, D= 19mm, E= 42mm, F= 12,5mm, G= 38mm, H= 293mm.
€182.38
€202.64
-10%
Galvanised steel DC plough anchor 63Kg FNIP63723
Galvanised steel plough anchor with high holding power. Recommended for boats up to 30 metres. Weight 63kg. Dimensions: A= 1270mm, B= 6760mm, C= 567mm, D= 28mm, E= 56mm, F= 22mm, G= 60mm, H= 537mm.
€1,087.02
€1,207.80
-10%
Galvanised steel DC plough anchor 50Kg FNIP63722
Galvanised steel plough anchor with high holding power. Recommended for boats up to 27 metres. Weight 50Kg. Dimensions: A= 1175mm, B= 695mm, C= 523mm, D= 24mm, E= 48mm, F= 20mm, G= 52mm, H= 486mm.
€845.46
€939.40
-10%
Galvanised steel DC plough anchor 40Kg FNIP63721
Galvanised steel plough anchor with high holding power. Recommended for boats up to 24 metres. Weight 40kg. Dimensions: A= 1099mm, B= 665mm, C= 489mm, D= 24mm, E= 48mm, F= 20mm, G= 52mm, H= 461mm.
€766.95
€852.17
-10%
Galvanised steel DC plough anchor 32Kg FNIP63720
Galvanised steel plough anchor with high holding power. For boats up to 23 metres. Weight 32kg. Dimensions: A= 1023mm, B= 603mm, C= 445mm, D= 26mm, E= 62mm, F= 18mm, G= 56mm, H= 425mm.
€547.13
€607.93
-10%
Galvanised steel DC plough anchor 25Kg FNIP63719
Galvanised steel plough anchor with high holding power. For boats up to 21 metres. Weight 25Kg. Dimensions: A= 945mm, B= 558mm, C= 415mm, D= 24mm, E= 48mm, F= 16mm, G= 52mm, H= 397mm.
€426.35
€473.73
-10%
Galvanised steel DC Plough Anchor 20Kg FNIP63718
Galvanised steel plough anchor with high holding power. For boats up to 20 metres. Weight 20Kg. Dimensions: A= 877mm, B= 518mm, C= 392mm, D= 24mm, E= 48mm, F= 16mm, G= 48mm, H= 370mm.
€350.26
€389.18
-41.41%
Italwinch CLS Vertical Windlass 12V 700W Stainless Steel 6mm Chain
Italwinch CLS Vertical Windlass 12V 700W Stainless Steel 6mm ChainStainless steel vertical windlass. Available in low profile, with different drives and recommended for boats up to 13 mt. SMART use the 6mm chain and is equipped with rope tensioner. Comes with built-in chain counter sensor. Without Drum.
€649.00
€1,107.76
-41.55%
Italwinch Obi 500W 12V Anchor Windlass without Drum for 6mm Chain
Italwinch Obi 500W 12V Anchor Windlass without Drum for 6mm Chain.
Italwinch Obi500 windlass without drum. 500W 12V motor. Average consumption 60A. 6mm chain gypsy. Maximum pulling capacity 630kg. Working load 90kg. Weight 8.2kg.
Horizontal-axis winch in anodized anticorodal aluminum. The OBI 500 can use 6mm or 8mm diameter chain, depending on the model, and is equipped with a line tensioner system. With various motorizations, it is recommended for boats up to 9m.
€619.00
€1,058.96