International Cruiser 200 Bright White 2.5lt Antifouling N702458COL1201
zoom_out_map
chevron_left chevron_right
-45.03%

International Cruiser 200 Bright White 2.5lt Antifouling N702458COL1201

Cruiser 200 a polishing antifouling suitable for application onto vessels in fresh and salt water. The eroding technology avoids paint build up and provides up to one year performance.

€119.90 VAT included

€98.28 VAT excluded

€218.13-45.03%

Il Nostro Negozio

Visit us in our shop

WE ARE AT YOUR DISPOSAL AT OUR POINT OF SALE
Not just online! Come and visit us also in the shop!

In our store you will find a wide selection of selected items and you will be assisted by our specialized staff with over a decade of experience in the nautical sector.
Everything for the boat ... deck equipment, anchoring and mooring, hydraulic and electrical systems, photovoltaics, stainless steel hardware, antifouling and paints, engine spare parts, on-board safety, sailing accessories, nautical instruments, GPS, depth sounders and much more!

We are in San Giorgio di Nogaro in the province of Udine, an important basin, located in the Bassa Friulana, bathed by the Corno river ... a few km from well-known destinations such as Lignano, Grado, Trieste etc.

Nautimarket Europe s.r.l., Via Marittima 17, 33058 San Giorgio di Nogaro (UD) Italy

Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)

Cruiser 200 is a polishing antifouling product effective against fouling organisms; slime, aquatic plants and animals. A polishing antifouling suitable for application
onto vessels in fresh and salt water. The eroding technology avoids paint build up and provides up to one year performance. A range of bright colours including
a true white. Suitable for all substrates including aluminium.

PRODUCT INFORMATION
Colour YBP200 White
Finish Matt
Specific Gravity 1.4 g/l average
Volume Solids 52% average
Typical Shelf Life 2 yrs
VOC (As Supplied) 420 g/lt average
VOC (EU Solvent) 296 g/kg average EU Solvent Emissions Directive (Council Directive 1999/13/EC)
Unit Size 2.5 Lt

APPLICATION AND USE

Preparation
PREVIOUSLY ANTIFOULED SURFACE:
In Good Condition: All fouling and contamination must be thoroughly removed including the leached layer. Use high pressure fresh water wash (3000 psi/207 bar) and/or scraping and wet sanding with typically 80120 grade paper. Do not dry sand. If old antifouling is incompatible or unknown, seal with suitable International Paint barrier/sealer coat.
In Poor Condition: Use Interstrip to remove all traces of antifouling.
PRIMING: All preparation for bare substrates is covered on the appropriate primer datasheet.
BARE GRP: Prime with Gelshield 200 for osmosis protection, or Primocon.
STEEL/IRON/LEAD/WOOD: Prime with Interprotect or Primocon.
PLYWOOD: Prime with Epiglass followed by Interprotect.
Hints Mixing: Thoroughly stir until product is mixed to a uniform consistency before use.
Thinning: Thinning is not recommended. Antifouling performance can be compromised if correct dry film thickness is not applied.
Cleaner: YTA085 International Antifouling Thinners #3.
Airless Spray Pressure 176220 bar/25003200 psi. Tip Size: 2180.
Ventilation and Humidity Control: Ensure adequate ventilation during use.
Other: Antifoulings should only be wet sanded. Never dry sand or burnoff old antifoulings. True colour will develop after immersion.

Packing of 2.5lt.

N702458COL1201
8025223422301
16 other products in the same category: