International Woodskin Wood varnish YVC316 Natural Teak 2.5Lt 458COL9554
International Woodskin Clear Wood varnish suitable for use on all types of wood, including oily woods such as teak and iroko, no need to sand between coats, will not crack or flake, semi-gloss finish, YVC316-Natural Teak color, 2.5 liters.
Visit us in our shop
WE ARE AT YOUR DISPOSAL AT OUR POINT OF SALE
Not just online! Come and visit us also in the shop!
In our store you will find a wide selection of selected items and you will be assisted by our specialized staff with over a decade of experience in the nautical sector.
Everything for the boat ... deck equipment, anchoring and mooring, hydraulic and electrical systems, photovoltaics, stainless steel hardware, antifouling and paints, engine spare parts, on-board safety, sailing accessories, nautical instruments, GPS, depth sounders and much more!
We are in San Giorgio di Nogaro in the province of Udine, an important basin, located in the Bassa Friulana, bathed by the Corno river ... a few km from well-known destinations such as Lignano, Grado, Trieste etc.
Nautimarket Europe s.r.l., Via Marittima 17, 33058 San Giorgio di Nogaro (UD) Italy
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
International Woodskin Clear Wood varnish YVC316 Natural Teak
Woodskin is a one-component oil varnish hybrid which provides a natural looking semi-gloss finish. The microporous technology enables the wood to breathe. Woodskin is easy to apply and really penetrates into the grain providing a more flexible coating.
Minimum maintenance requirements - simply clean and reapply season after season.
Its natural Teak colour showcases the beauty of any wood. Suitable for use on all types of wood, including oily woods such as teak and iroko. No Need to sand between coats; will not crack or flake.
Features
Color: YVC316-Natural Teak;
Finish: Semi-gloss;
Weight: Specific 0.92;
Solid volumes: 41.60%;
VOC: 447 g/lt;
Suitable for above the waterline: Exterior cabin/trims, Interior cabin/trims;
Substrates: Wood;
Pack size: 2.5 liters.
Preparation
Clean thoroughly with mild detergent. Roughen the surface with a sanding pad, clean thoroughly with fresh water and allow to dry. Remove all previous coatings. Follow directions for bare wood. Woodskin has been developed for application direct to bare wood, without the need for special preparation. Sanding is not required prior to applying Woodskin. However, if preferred for aesthetic purposes, bare wood can be sanded smooth with 80180 grade paper and then 280 grade paper. Remove sanding dust by brushing, dusting and wiping. If wiping with solvent then allow to dry completely before applying the first coat. If applying to oily woods ensure the
surface is adequately prepared and degreased. Thinner No.1 is recommended.
Method Application (Brush)
Woodskin can be applied direct to bare wood or overcoated
on to itself. Pour the amount you expect to use in a separate container.
- Apply a minimum of 3 coats using a brush.
- Practical coverage (m²/L): 9.00.
- A long haired bristle brush is recommended for this purpose.
Sanding between coats is not required. Allow 24 hours drying time in between coats. Thinning is not recommended. Mixing Stir thoroughly before use.
Some Important Points
Never leave bare wood exposed for long periods of time as it will absorb moisture. Avoid using Woodskin straight from the can as this will cause it to age prematurely and may introduce contamination to the can. Failure to follow proper dry times carefully will cause improper drying, wrinkling and loss of adhesion. Avoid painting in direct sunlight. Use above the waterline only.
