Goodwe GW20K-ET Plus+ 20kW Three-phase Hybrid Inverter KR3552686
Three-phase bidirectional hybrid inverter of the ET Plus+ series by GoodWe model GW20K-ET 20kW, suitable for grid-connected photovoltaic systems, with the energy produced by the photovoltaic system is used to optimize self-consumption. The excess energy is used to charge the batteries and then transferred to the grid.
Visit us in our shop
WE ARE AT YOUR DISPOSAL AT OUR POINT OF SALE
Not just online! Come and visit us also in the shop!
In our store you will find a wide selection of selected items and you will be assisted by our specialized staff with over a decade of experience in the nautical sector.
Everything for the boat ... deck equipment, anchoring and mooring, hydraulic and electrical systems, photovoltaics, stainless steel hardware, antifouling and paints, engine spare parts, on-board safety, sailing accessories, nautical instruments, GPS, depth sounders and much more!
We are in San Giorgio di Nogaro in the province of Udine, an important basin, located in the Bassa Friulana, bathed by the Corno river ... a few km from well-known destinations such as Lignano, Grado, Trieste etc.
Nautimarket Europe s.r.l., Via Marittima 17, 33058 San Giorgio di Nogaro (UD) Italy
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
Goodwe GW10KN-ET PLUS 16A 10kW Three-phase Hybrid Inverter
The 16A 10kW GoodWe GW10KN-ET PLUS hybrid inverter is three-phase high voltage accumulator that promote energy independence and maximize self-consumption, thanks to a function that limits the export of power and usage shifts that help reduce bills. With power ratings 10kW, the ET Series supports up to 100% overload to maximize energy delivery and features an uninterruptible power supply (UPS) for inductive loads, such as air conditioners or refrigerators, with an automatic communication time of less than 10 milliseconds, which promotes savings in the event of introduction into the public network and guarantees energy independence and safety when the network is inactive or compromised.
• Integrated charge regulator
• More performance and safety
• Easy remote monitoring via PC, tablet and smartphone
• Intelligent battery management function
• Compatible with BYD, Pylon Li-ion batteries
• IP65 certified
• Attractive design
• Without fan, maximum silence
• Maximum efficiency up to 98.3%
Technical data:
- Battery type: Lithium Ion
- Battery Rated Voltage: 500 V
- Battery voltage range: 180~600 V
- Starting voltage: 180 V
- No. of battery inputs: 1
- Max. continuous charge current: 25 A
- Max. continuous discharge current: 25 A
- Max. charging power: 10000 W
- Max. discharge power: 10000 W
PV string input data
- Max. input voltage: 1000 V
- MPPT Operating Voltage Range: 200~850 V
- Starting voltage: 180 V
- Rated input voltage: 620 V
- Max. input current per MPPT: 16 A
- Max. short circuit current per MPPT: 21.2 A;
- Number of MPPTs: 2
- Number of strings for MPPT: 1
AC side output data (on-grid)
- Nominal Output Power: 10000 W
- Nominal Apparent Power Output to Utility Grid: 10000 VA
- Max. Apparent Power Output to Utility Grid: 11000 VA
- Max. Apparent Power from Utility Grid: 15000 VA
- Nominal Output Voltage: 400/380V, 3L/N/PE
- Output Voltage range: 0 ~ 300 V
- Nominal AC Grid Frequency: 50/60 Hz
- AC Grid Frequency range: 45 ~ 65 Hz
- Max. AC Current Output to Utility Grid: 16.5 A
- Max. AC Current From Utility Grid: 22.7 A
- Power factor: ~ 1 (Adjustable from 0.8 leading to 0.8 lagging)
- Max. total harmonic distortion: <3%
AC side output data (backup)
- Back-up Nominal apparent power: 10000 VA
- Max. Output apparent power without grid: 10000 VA (16500@60sec)
- Max. Output apparent power with grid: 10000 VA
- Max. Output current: 16.5 A
- Nominal Output Voltage: 400/380 V
- Nominal Output Frequency: 50/60 Hz
- Output THDv (with linear load): <3%
Efficiency
- Max. efficiency: 98.2%
- European efficiency: 97.5%
- Maximum. battery to AC efficiency: 97.5%
- MPPT efficiency: 99.9%
Protection
- PV insulation resistance detection: Integrated
- Residual current monitoring: Integrated
- PV reverse polarity protection: Integrated
- Anti-isolation protection: Integrated
- AC side overcurrent protection: Integrated
- AC side short circuit protection: Integrated
- AC side overvoltage protection: Integrated
- DC side switch: Integrated
- DC-side surge arrester: Type II
- AC side surge arrester: Type III
- Remote shutdown: Integrated
General data
- Operating temperature range: -35 ~ +60°C
- Relative Humidity: 0 ~ 95%
- Max. operating altitude: 4000m
- Cooling method: Natural convection
- User interface: LED & APP
- Communication with BMS: RS485; CAN
- Communication with meter: RS485
- Communication with portal: WiFi / WiFi + LAN (Optional) / 4G (Optional)
- Weight: 24kg
- Dimensions (W×H×D): 415x516x180 mm
- Topology: Non-Isolated
- Night power consumption: <15
- Ingress protection degree: IP66
- Installation type: Wall mounting.
For more details, we recommend viewing the technical data sheets of each single component of the kit or asking our technicians for information.
IMPORTANT NOTE:
The reduced VAT is reserved for PRIVATE INDIVIDUALS, end users and qualified photovoltaic and thermal energy installers or heat production INSTALLED IN ITALY. In case you do not have the right to the tax deduction (DEALERS) kindly contact us in advance so that an invoice with 22% VAT can be issued as per the law in force. In the absence of receipt of the declaration the order cannot be shipped as a copy of the VAT declaration form must by law be attached to the company invoice. The declaration form and ID document must be sent to the email address.
After purchase, kindly complete and return the VAT declaration form together with a copy of an ID document.
