Marlin Antiskid Deck Coating 5Lt Light grey N712461COL592
Marlin Grip Antiskid Deck Coating is a non-slip coating ideal for boat decks, soft, elastic, resistant and easy to wash finish, coverage 2-3mq/l, light grey color, 5 liter.
Visit us in our shop
WE ARE AT YOUR DISPOSAL AT OUR POINT OF SALE
Not just online! Come and visit us also in the shop!
In our store you will find a wide selection of selected items and you will be assisted by our specialized staff with over a decade of experience in the nautical sector.
Everything for the boat ... deck equipment, anchoring and mooring, hydraulic and electrical systems, photovoltaics, stainless steel hardware, antifouling and paints, engine spare parts, on-board safety, sailing accessories, nautical instruments, GPS, depth sounders and much more!
We are in San Giorgio di Nogaro in the province of Udine, an important basin, located in the Bassa Friulana, bathed by the Corno river ... a few km from well-known destinations such as Lignano, Grado, Trieste etc.
Nautimarket Europe s.r.l., Via Marittima 17, 33058 San Giorgio di Nogaro (UD) Italy
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
Marlin Antiskid Deck Coating 5Lt Light grey
Marlin Grip is an ideal antiskid deck coating for boat decks.
It is applied very easily with the special roller supplied or with any medium-coarse-grained sponge roller (or roller for burnt effect) to obtain a uniform roughness and an excellent anti-slip effect.
The degree of roughness can be easily customized according to the quantity applied, the pressure exerted on the roller and the number of passes made with the roller on the paint. In this way it is possible to obtain a very fine and elegant effect or a very pronounced and aggressive roughness suitable for racing boats. The average yield is 2 mq/l.
Thanks to its unique composition and blend of resins, Marlin Grip has great elasticity but at the same time excellent resistance to foot traffic, atmospheric agents, water and UV rays. This guarantees a long life.
Moreover, thanks to the special additives, it provides a soft and velvety surface under the foot, does not retain dirt and is very easy to wash.
Instructions for Use:
1. Surface preparation.
1.1 Thoroughly wash and degrease all surfaces.
1.2 Dull all surfaces with medium abrasive paper (No. 180-220) or with abrasive felt pad.
2. Application.
2.1 Pour an adequate quantity of product (yield about 2-3 mq/l) and spread it with a brush or spatula. The quantity of product to be used varies according to the desired roughness, the greater the quantity corresponds to the greater roughness.
2.2 Pass the special roller (or a medium-large grain sponge roller) over the spread product. A pressure corresponds to greater roughness and anti-slip effect. A lower pressure and/or more roller passes correspond to a lower roughness.
Technical features:
Light grey color.
Yield: 2-3 sqm/l.
Application: brush or spatula.
Unit size: 5 liter.
