12V 230W Solar Kit with 20A MPPT Charger 100Ah Battery + Cable Kit
chevron_left chevron_right

12V 230W Solar Kit with 20A MPPT Charger 100Ah Battery + Cable Kit

12V 230W Photovoltaic Kit complete with 230W photovoltaic module, SmartSolar MPPT 100/20 20A 12/24V Charge Controller, TopSolar 100Ah AGM battery and Solar Cable Kit 2x5m-4mmq with F/M MC4 connectors for stand-alone PV sy-stems, remote houses, camper vans, boats, lighting systems, etc.


€352.95 VAT excluded


Shipping from Italy or Europe warehouse in 4-8 working days unless otherwise specified in the product description

Il Nostro Negozio

Visit us in our shop

Not just online! Come and visit us also in the shop!

In our store you will find a wide selection of selected items and you will be assisted by our specialized staff with over a decade of experience in the nautical sector.
Everything for the boat ... deck equipment, anchoring and mooring, hydraulic and electrical systems, photovoltaics, stainless steel hardware, antifouling and paints, engine spare parts, on-board safety, sailing accessories, nautical instruments, GPS, depth sounders and much more!

We are in San Giorgio di Nogaro in the province of Udine, an important basin, located in the Bassa Friulana, bathed by the Corno river ... a few km from well-known destinations such as Lignano, Grado, Trieste etc.

Nautimarket Europe s.r.l., Via Marittima 17, 33058 San Giorgio di Nogaro (UD) Italy

Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)

12V 230W Solar Kit with 20A MPPT Charger 100Ah Battery + Cable Kit

12V 230W Photovoltaic Kit complete with 230W 18.56V photovoltaic module, SmartSolar MPPT 100/20 20A 12/24V Solar Charge Controller, TopSolar 100Ah 12V C10 AGM battery and Solar Cable Kit 2x5m-4mmq with F/M MC4 connectors for stand-alone PV sy-stems, remote houses, camper vans, boats, industrial applications, lighting systems, road signs, TVCC systems and much more.
The kit is made by:
1 - 230W 18.56V Monocrystalline Photovoltaic Module #N150030050184;
1 - Victron Energy SmartSolar MPPT 100/20 20A Solar Charge Controller #UF22402W
1 - TopSolar 100Ah 12V C10 AGM battery Solar Wind Photovoltaic Systems #N51120050930;
1 - Solar Cable Kit 2x5m-4mmq with F/M MC4 connectors #N151230750280.

230W 18.56Vmp Monocrystalline Photovoltaic Module
Designed for the rural electrification, data survey, telecommunication and special applications. Thanks to its versatility, the panel is very popular and used both in developing countries as well as the European market. Furthermore every single cell and module produced have been tested and checked several times throughout the manufacturing process. Both the photovoltaic cells and the backsheet are black, for a total black look. The interconnections between panels are easy, practical and optimized for every configuration and voltage. Robust construction and heavy duty anodized aluminium frame design makes this module suitable, safe, simple and fast to be installed in many situations.
Prevent the loss of electricity: used on the roof of the car, charge the car battery at any time. Can prevent the car battery from losing electricity, and solve the situation that the car cannot be fired due to the battery loss caused by the long-term parking of the vehicle.
Elettrodomestici di bordo: quando si utilizzano gli elettrodomestici di bordo, la potenza originale della batteria dell'auto non si perde (audio per auto, navigatore, registratore di guida, aspiratore, ventilatore per auto, frigorifero per auto, cellulare, ecc.).

- High module conversion efficiency.
- The efficiency of high-quality and high-efficiency monocrystalline silicon wafers can reach ≥22.5%.
- Excellent performances even during low solar radiation (cloudiness, morning or evening).
- Solar-grade tempered prismatic glass.
- High-quality cells and partial-cell design lower series resistance and reduce power degradation.
- Strict and continuous quality controls during all the production phases up to shipment.
- Anti-corrosion EVA effectively protects the battery panel.
- Strong and anti-wind and snow, unique technology to avoid freezing of water in the frame and deformation.
- Lightweight and flexible features can make it seamlessly integrated into your vehicle.
- The integrated bypass-diodes allow the panel to work when partially shaded.
- IP67 rated junction box, reliable cables and standard MC4 connectors improve the stability.

Technical data:
- Model: SZ-230-M;
- Peak power: 230 W;
- Cell type: 182x91-16x4 Monocrystalline;
- Cell Efficiency: ≥22.5 %;
- Vmp: 18.56 V;
- Imp: 12.40 A;
- Voc: 21.76 V;
- Isc: 13.14 A;
- Maximum system voltage: 500 V;
- Output tolerance: 0±3 %;
- Cable: 700 mm/2.5 mm2;
- Connector type: MC4/MC4 compatible;
- Model structure: Aluminum frame, glass, EVA, black backsheet;
- Junction box classified: ≥IP67;
- Working temperature: -40°C ~ +80°C;
- Size: 1520x768x30 mm;
- Weight: 14.6 kg.
Pv module provided with cable MC4 connectors. If the distance between the PV module and charge controller is less than 10 mt, we recommend using 4 mm2 cable; If the distance between the PV module and charge controller is more than 10 mt, we recommend using 6 mm2 cable.

Victron Energy SmartSolar MPPT 100/20 20A 12/24V Solar Charge Controller
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

• Ultra-fast Maximum Power Point Tracking (MPPT): Especially in case of a clouded sky, when light intensity is changing continuously, an ultra fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
• Load output: Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a preset voltage.
• BatteryLife: intelligent battery management. The BatteryLife algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%.
• Resin encapsulated electronics.
• Day/night timing and light dimming option.
• Outstanding conversion efficiency: No cooling fan. Maximum efficiency exceeds 98%. Full output current up to 40°C (104°F). No cooling fan.
• Advanced Maximum Power Point Detection in case of partial shading conditions: If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPT’s tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
• Flexible charge algorithm: Fully programmable charge algorithm, and eight preprogrammed algorithms, selectable with a rotary switch.
• Extensive electronic protection: Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.

Technical Specifications:
- Battery voltage (auto select): 12/24/48V;
- Rated charging current: 20A;
- Nominal PV power, 12V/24V/48V: 290W/580W/1160W;
- Maximum PV open circuit voltage: 100V;
- Max PV short-circuit current 2: 20A;
- Automatic load disconnect: Yes;
- Peak efficiency: 98%;
- Self-consumption - load ON: 26/20/19 mA;
- Self-consumption - load OFF: 10/8/7 mA;
- Charging voltage - absorption: 14.4V/28.8V/57.6V;
- Charging voltage - float: 13.8V/27.6V/55.2V;
- Charging algorithm: Multi-phase adaptive;
- Temperature compensation: -16 mV/°C or -32 mV/°C;
- Max continuous charge current: 20A/20A/1A;
- Low voltage load disconnect: 11.1V / 22.2V / 44.4V or 11.8V / 23.6V / 47.2V or Battery Life algorithm;
- Low voltage load reconnect: 13.1V / 26.2V / 52.4V or 14V / 28V / 56V or Battery Life algorithm;
- Protection: Output short circuit/Over temperature;
- Operating temperature: From -30 to + 60°C (full rated output up to 40°C);
- Humidity: 95%, non-condensing;
- Color: Blue (RAL 5012);
- Power terminals: 6mmq/AWG10;
- Protection category: IP 43 (electronic components), IP22 (connection area);
- Weight: 0.65 kg;
- Size: 100x113x60 mm;
- Safety: EN/IEC 62109-1, UL 1741, CSA C22.2.

TopSolar 100Ah 12V C10 AGM battery Solar Wind Photovoltaic Systems
Sealed batteries with AGM technology, are designed for both cyclic and buffer use. The unique construction technique makes these batteries totally hermetic preventing potential leakage of gas or acid in any position of operation. These batteries are maintenance free and can operate at temperatures from - 20 to + 45%. This special C10 battery has the characteristic of withstanding discharges faster compared to normal batteries.
High corrosion resistant performance: Pb-Ca multi-alloy grid. High energy density and power density. Excellent charge acceptance ability. Excellent deep cycle discharge capability. Precision sealing technology. Long life.
The most common use of these batteries is:
- Power systems.
- Telecommunications system.
- As backup batteries.
- On-board services.
- Setting up of gasoline outboards.
- Road sign illumination.
- Photovoltaic Street Lights.
- Emergency lighting, auto control system.
- Photovoltaic systems.
Model: TopSolar JM12-100;
Battery Type: AGM;
Nominal Voltage: 12V;
Nominal Capacity: 100 Ah (C10);
Rated Capacity:
-    100Ah  - 10Hour Rate (10.0A to 10.8V)
-    80.7Ah  -  3Hour Rate (26.9A to 10.8V)
-    65.5Ah  -  1Hour Rate (65.5A to 10.5V)
Internal resistance: Full charged at 25˚C: 10.0 mΩ
Max. Discharge Current: 1200A(5S)
Operating Temperature:
-    Discharge: -20 ~50℃(-4~ 122˚F)
-    Charge: -20 ~50℃(-4~ 122˚F)
-    Storage: -20 ~50℃(-4~ 122˚F)
Charge Method (25 ˚C): Charge current: Max.25A - Recom.10A
Float Charge voltage (-3mV/℃):
-    13.5-13.8V,recom.13.5V(Full floating system)
-    13.5-13.8V,recom.13.62V(Cycle use system)
-    Equalize charge:13.8-14.1V,recom.14.1V(-4mV/ ˚C)
-    Cycle charge:14.4-15.0V,recom.14.4V(-5mV/ ˚C)
Self discharge: 3% of capacity declined per month at 25 ˚C
Terminal: M8;
Dimensions (LxHxW): 33x22x17 cm;
Container Material: ABS;
Weight: Approx 28.5 kg (62.8 lbs).

Solar Cable Kit 2x5m-4mmq with F/M MC4 connectors
Cable kit made of black 4 mm² 5 meter photovoltaic cable, red 4 mm² 5 meter photovoltaic cable, MC4 female and male connectors. Specifically designed for the creation of quick and safe connections in the field of photovoltaic applications with the most common inverter and junction boxe. They are made with tinned copper contacts and PPO housing. Resistant to mechanical and climatic stress and resistant to UV rays. The cables and connectors are supplied pre-wired.

The reduced VAT is reserved for PRIVATE INDIVIDUALS, end users and qualified photovoltaic and thermal energy installers or heat production INSTALLED IN ITALY. In case you do not have the right to the tax deduction (DEALERS) kindly contact us in advance so that an invoice with 22% VAT can be issued as per the law in force. In the absence of receipt of the declaration the order cannot be shipped as a copy of the VAT declaration form must by law be attached to the company invoice. The declaration form and ID document must be sent to the email address. 
After purchase, kindly complete and return the VAT declaration form together with a copy of an ID document.



Modulo di Dichiarazione IVA AGEVOLATA 10% VAT declaration form

Download (1.08MB)

You might also like