Quick BTQ 185-95 DC Single Propeller Bow Thruster 12V or 24V 6Kw Thrust 95Kgf Q50811000
Visit us in our shop
WE ARE AT YOUR DISPOSAL AT OUR POINT OF SALE
Not just online! Come and visit us also in the shop!
In our store you will find a wide selection of selected items and you will be assisted by our specialized staff with over a decade of experience in the nautical sector.
Everything for the boat ... deck equipment, anchoring and mooring, hydraulic and electrical systems, photovoltaics, stainless steel hardware, antifouling and paints, engine spare parts, on-board safety, sailing accessories, nautical instruments, GPS, depth sounders and much more!
We are in San Giorgio di Nogaro in the province of Udine, an important basin, located in the Bassa Friulana, bathed by the Corno river ... a few km from well-known destinations such as Lignano, Grado, Trieste etc.
Nautimarket Europe s.r.l., Via Marittima 17, 33058 San Giorgio di Nogaro (UD) Italy
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
Quick BTQ 185-95 DC Single Propeller Bow Thruster 12V o 24V, motor power 6 Kw, thrust 95 Kgf, Propeller tunnel Ø185mm
Single propeller made in sturdy composite material. Recommended boat length 12-15 m (39-49 ft). Solenoids protection carter in sturdy composite material. Composite material. Bronze gearbox. Independent zinc anode from the gearbox and easily replaceable. Equipped with elastic coupling.
The Gearbox is created so that the behaviour of the propeller is unaffected in either direction. The conical gears that make up the gearbox are reinforced and adjusted to ensure maximum efficiency. Maintenance is not required since the special highly resistant components guarantee a perfect lubrication seal for life. The anodic zinc protection is easily replaceable.
The bronze propeller gear leg is provided with a hydrodynamic profile that minimises turbulence.
The 4-blade Propeller guarantee maximum thrust performance and reduction in current absorption. This is made of composite materials, resistant in every condition, and fastened with self-locking nuts in stainless steel.
The case that protects the reversing contactors is made of robust composite materials that are resistant to corrosion. The electrical connections are provided with quick connectors.
The elastic joint that optimises the alignment between motor and gearbox is an exclusive Quick design. This acts as an even tension device, preserving the operating system from impulses from the bow thruster, with above-average results.
The motors new-generation materials have been chosen to constantly guarantee required output and maximum performance, given the severe conditions required by the application. Protection against overheating of the motor is ensured by a microprocessor.
The support flange is completely in hard coat anodised aluminium.
Technical data:
Model: BTQ 185-95;
Propulsion system: Single propeller;
Ø Tunnel: 185 mm;
Voltage: 12V o 24V;
Motor power: 6 Kw;
Thrust: 95 Kgf;
Boat size*: 12-15 m (39-49 ft);
Weight: 12V - 27,2 kg, 24V - 24,4 kg;
Dimensions: 12V: A - 410 mm, B - 185 mm, C - 123 mm; 24V: A - 374 mm, B - 185 mm, C - 123 mm.
(*) ATTENTION: Indications may vary according to the boat type.
NB: Click on the drop down menu to choose 12V or 24V propeller.
Quick BTQ 185-85 DC Twin Propeller Bow Thruster 12V or 24V 4,3Kw 85Kgf Q50811011
Quick BTQ 185-65 DC Twin Propeller Bow Thruster 12V or 24V 3,3Kw 65Kgf Q50811010
BTQ 140-40C Bow or Stern Thruster with Protection Case 12V 2,2Kw 40Kgf Q50811008
Quick BTQ 185-85 DC Twin Propeller Bow Thruster 12V or 24V 4,3Kw 85Kgf Q50811011
