Rapid spreadable metallic putty 200g FIBERGLASS N70749900012
Universal polyester filler, ice white in colour, thixotropic, with very refined fillers and excellent adhesion, suitable for filling missing parts on metal, fibreglass, etc. 200g.
Visit us in our shop
WE ARE AT YOUR DISPOSAL AT OUR POINT OF SALE
Not just online! Come and visit us also in the shop!
In our store you will find a wide selection of selected items and you will be assisted by our specialized staff with over a decade of experience in the nautical sector.
Everything for the boat ... deck equipment, anchoring and mooring, hydraulic and electrical systems, photovoltaics, stainless steel hardware, antifouling and paints, engine spare parts, on-board safety, sailing accessories, nautical instruments, GPS, depth sounders and much more!
We are in San Giorgio di Nogaro in the province of Udine, an important basin, located in the Bassa Friulana, bathed by the Corno river ... a few km from well-known destinations such as Lignano, Grado, Trieste etc.
Nautimarket Europe s.r.l., Via Marittima 17, 33058 San Giorgio di Nogaro (UD) Italy
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
Rapid spreadable metallic putty 200g FIBERGLASS
FIBERGLASS PUTTY is a universal, ice-white, thixotropic polyester putty with a spatula, with very refined fillers and excellent adhesion. Suitable for filling missing parts on metal, hot-dip or galvanized sheets, aluminium, steel, fibreglass, etc. Its excellent qualities mean that the product can be troweled and easily sanded, making it absolutely unparalleled in restoration work. Also available in the LIGHT FIBERGLASS STUCCO version with a low specific weight which allows the grouted supports not to vary.
TECHNICAL DATA
Specific weight: 1700 ± 20 g/ml;
V.O.C.: 45 ± 2 g/l;
Viscosity: 1600 ± 200 cP;
Consistency: 1100 ± 200 cP;
Color: Ice white.
STORAGE
Store the packages tightly closed and in a cool (temperature below 25°C) and ventilated place for a maximum of 12 months starting from the production date highlighted on the jar. Avoid direct exposure to sunlight.
APPLICATION
Make sure that the surfaces to be grouted are perfectly dry and clean. In case of application on bare sheet metal, sand it with P 80 and P 150 abrasive paper.
Using clean tools, remove the quantity to use from the jar, adding 1 - 3 grams of hardener for every 100 grams of product.
Mix this quantity by amalgamating the two components well.
Apply the stucco on the surface to be worked on, keeping in mind that the product can be sanded (grit P 80 – P 120 dry) after approximately 30 - 40 minutes; hardening times can be altered depending on the ambient temperature: they are shortened with temperatures above 25 °C and longer with lower temperatures.
Do not put catalyzed and/or unused stucco back into the can to prevent the entire contents of the can from deteriorating.
Close the jar after use to prevent the product from hardening upon contact with air.
