Ultraflex Hydraulic Steering Kit for boats up to 10mt 33' Inboard Motors UT53006070
Visit us in our shop
WE ARE AT YOUR DISPOSAL AT OUR POINT OF SALE
Not just online! Come and visit us also in the shop!
In our store you will find a wide selection of selected items and you will be assisted by our specialized staff with over a decade of experience in the nautical sector.
Everything for the boat ... deck equipment, anchoring and mooring, hydraulic and electrical systems, photovoltaics, stainless steel hardware, antifouling and paints, engine spare parts, on-board safety, sailing accessories, nautical instruments, GPS, depth sounders and much more!
We are in San Giorgio di Nogaro in the province of Udine, an important basin, located in the Bassa Friulana, bathed by the Corno river ... a few km from well-known destinations such as Lignano, Grado, Trieste etc.
Nautimarket Europe s.r.l., Via Marittima 17, 33058 San Giorgio di Nogaro (UD) Italy
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
Hydraulic Steering Kit for boats up to 10mt 33'. Inboard Motors.
3.5 wheel turns. Normal steering wheel sensation.
The kit contains:
- 1 Ultraflex UP20 F pump;
- 1 Ultraflex UC69-I cylinder.
IMPORTANT NOTE:
In order to complete the kit, it is necessary to purchase the following:
- 2 lt hydraulic oil (see related accessories)
- 1 kit hydraulic pipes of required length (see related accessories).
Features of pump UP20 F:
• With non-return valve that prevents reversibility
• Integrated protection valve against overpressure
• Stainless steel 3/4” rotary spindle
• Corrosion resistant composite material tank
• Non-return valve and spindle gaskets easily accessible in case of replacement
• With 90° adjustable fittings for 3/8” (9,5 mm) tube/pipe
• Suitable only for UC94-OBF, UC68-OBS e UC69-I cylinders
• Tilt mechanism X52 - 39250U for UP20 T pump
• Total adjustment angle of 48° on five different positions
NOTE: The X52 mechanism can be used on standard Ultraflex steering with tilt mount, either tilt, mechanical, rotary and straight, as well as hydraulic except for SilverSteer™ and MasterDrive™ systems.
• For UP20 F pumps there is the possibility of semi-recessed mount with square flange X74 - 43048Y
Technical specifications:
Mount: Frontal
Displacement/Revolution: 20 cc - 1.2 cu.in
Number of pistons: 5
Pressure relief valve setting: 70 bar - 1000 PSI
Maximum helm diameter: 508mm - 20"
Weight: 3.6kg - 8lbs
UC69-I - Balance: same number of revolutions for half-stroke and end-stroke.
Specifications UC69-I Cylinder:
Volume: 69 cc - 4.2 cu.in
Torque: 32 kgm - 2783 lbs.in
Thrust: 168 kg - 371 lbs
Internal Diameter: 25 mm - 0.98”
Stroke: 150 mm - 5.9”
Fittings 3/8"(9,5 mm): for reinforced flexible tube
Measurements: A= 150mm, B= 129mm, C= 105mm, D= 417mm, E= 31,3mm, F= 40mm, G= 73mm.