Boero Altura 619 Long Life Hard Antifouling 201 Black 0,75 Lt 45100015
zoom_out_map
chevron_left chevron_right
-35%

Boero Altura 619 Long Life Hard Antifouling 201 Black 0,75 Lt 45100015

Highly effective long life antifouling, free from organostannic toxins, with a high content of a special copper salt. It protects wood, steel and fibreglass hulls for many seasons.

€74.34 VAT included

€60.93 VAT excluded

€114.36-35%

Il Nostro Negozio

Visit us in our shop

WE ARE AT YOUR DISPOSAL AT OUR POINT OF SALE
Not just online! Come and visit us also in the shop!

In our store you will find a wide selection of selected items and you will be assisted by our specialized staff with over a decade of experience in the nautical sector.
Everything for the boat ... deck equipment, anchoring and mooring, hydraulic and electrical systems, photovoltaics, stainless steel hardware, antifouling and paints, engine spare parts, on-board safety, sailing accessories, nautical instruments, GPS, depth sounders and much more!

We are in San Giorgio di Nogaro in the province of Udine, an important basin, located in the Bassa Friulana, bathed by the Corno river ... a few km from well-known destinations such as Lignano, Grado, Trieste etc.

Nautimarket Europe s.r.l., Via Marittima 17, 33058 San Giorgio di Nogaro (UD) Italy

Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)

Boero Altura 619 Long Life Hard Antifouling  201 Black. 0,75 Lt .

Long life antifouling, with extreme antifouling capabilities, with multipurpose toxins, with high copper salt content. Protects hulls in wood, iron and fibreglass for many seasons.
Not suitable for aluminium hulls.

This antifouling is great for fast boats

PHYSICAL CHEMICAL DATA (at 20°C)
Finish: Semi-glossy
Colour:  Black .201
Solids (by volume): 50 ± 2 %
Specific gravity: 2,03 ÷ 2,07 g/cm³
Flash point: 36° C
Viscosity: 5.000 ÷ 8.000 cP

APPLICATION DATA
Application method: Thinner 703.000 (max. 3 - 5 %)
Dry film thickness: Standard range of application 50 μ - 70 μ (Recommended 60 μ)
Wet film thickness: Standard range of application 100 μ - 140 μ (Recommended 120 μ)
Theoretical yield at the thickness indication m2/litre: Application range at the thickness recommended 8,3
Recommended Primers: Anticorrosiva CR – Mistral Fondo – Delta 3000 – Delta UC HB

SURFACE PREPARATION
If recoating times have been exceeded, pressure wash with fresh water and remove any trace of oil or grease, allow to dry, sand thereafter and allow to dry and reapply a further coat of primer.
Apply 2 coats of ALTURA 619, on itself or antifouling of the same nature.
On old antifouling, of different or unkown nature, it will be necessary to apply a coat of Anticorrosiva CR. (not suitable for aluminium hulls).

CONDITIONS DURING APPLICATION
Ensure there is adequate ventilation when the paint is applied in confined spaces.

Boero
45100015
8025223417505
16 other products in the same category: