Boero Giano One-component Universal Epoxy Undercoat 0,75 Lt 001 White 45100315
Visit us in our shop
WE ARE AT YOUR DISPOSAL AT OUR POINT OF SALE
Not just online! Come and visit us also in the shop!
In our store you will find a wide selection of selected items and you will be assisted by our specialized staff with over a decade of experience in the nautical sector.
Everything for the boat ... deck equipment, anchoring and mooring, hydraulic and electrical systems, photovoltaics, stainless steel hardware, antifouling and paints, engine spare parts, on-board safety, sailing accessories, nautical instruments, GPS, depth sounders and much more!
We are in San Giorgio di Nogaro in the province of Udine, an important basin, located in the Bassa Friulana, bathed by the Corno river ... a few km from well-known destinations such as Lignano, Grado, Trieste etc.
Nautimarket Europe s.r.l., Via Marittima 17, 33058 San Giorgio di Nogaro (UD) Italy
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
Boero Giano One-component Universal Epoxy Undercoat. 0,75 Lt. 001 White.
Single-component anti-rust and epoxy undercoat that allows the application of single-component alkyd and / or polyurethane enamels on new or aged two-component products. It can be applied directly on any type of support after appropriate preparation.
PHYSICAL ASPECTS (at 20°C)
Finish: Matt
Colour: 001 White
Solids (bu volume): 42 ± 1 %
Specific gravity: 1,38 ÷ 1,43 g/cm³
Flash point: 26° C
Viscosity: 2.000 ÷ 4.000 cP
APPLICATION DATA
Thinner: 703.000
Application method:
Conventional: Pressure: 3,5 bar Nozzle: 1,7 mm – 1,9 mm Thinner: 703.000 (20 – 25%)
Thinner: 703.000 (5 – 10%)
Dry film thickness: Standard range of application 40 μ - 60 μ (Recommended 40 μ)
Wet film thickness: Standard range of application 100 μ - 143 μ (Recommended 100 μ)
Theoretical yield at the thickness indicated m2/litre. Application range at the thickness recommended 10
Recommended Primers: Delta 3000 – Delta UC HB – Noxy – Sintomar – Mistral fondo
SURFACE PREPARATION
On new or old two-component products: (DELTA 3000, DELTA UC HB)sand wtìith 240 grit sandpaper, before applying the product ensure that the surface is clean and dry.
On steel: roughen or disc sand
On Gel coat: sand and clean support.
CONDITIONS DURING APPLICATION
Ensure there is adequate ventilation when the paint is applied in confined spaces.
