Seatop Pure Sine Wave Inverter 1200W 2400W 12VDC 230V AC N52722020934
Seatop 1200W 2400W 12VDC 230V AC Pure Sine Wave Inverter, suitable for all applications where you need to feed 230 Vac loads from a low voltage power source 12 Vdc
Visit us in our shop
WE ARE AT YOUR DISPOSAL AT OUR POINT OF SALE
Not just online! Come and visit us also in the shop!
In our store you will find a wide selection of selected items and you will be assisted by our specialized staff with over a decade of experience in the nautical sector.
Everything for the boat ... deck equipment, anchoring and mooring, hydraulic and electrical systems, photovoltaics, stainless steel hardware, antifouling and paints, engine spare parts, on-board safety, sailing accessories, nautical instruments, GPS, depth sounders and much more!
We are in San Giorgio di Nogaro in the province of Udine, an important basin, located in the Bassa Friulana, bathed by the Corno river ... a few km from well-known destinations such as Lignano, Grado, Trieste etc.
Nautimarket Europe s.r.l., Via Marittima 17, 33058 San Giorgio di Nogaro (UD) Italy
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
1200W/2400W 12VDC 230V AC Seatop Pure Sine Wave Inverter
Suitable for all applications where 230 Vac loads are required from a low 12 Vdc voltage power source. This inverter has an harmonic distortion of less than 3% and can therefore power the most modern and sophisticated utilities.
It has a no load consumption of less than 0.53A, and in the event of the batteries reaching a voltage of about 10.6V it enters into protection mode to then switch off at 10.4V, thereby protecting the batteries from deep discharge.
Technical data:
- DC 12V to AC 230V;
- 1200W continuous power inverter;
- 2400W Surge power;
- No Load Curent Draw: < 0.53A;
- Pure sine wave output;
- Range Input Voltage: 10.8V-15.5V;
- Output voltage: 230V;
- Frequency: 50Hz;
- Low battery alarm: 10.6V± 0.4V;
- Low battery shut down: 10.4±0.4V;
- Soft Start;
- Dimensions: 320x160x77 cm;
- Weight: 2.70 kg.
WARNING
IF YOU INTEND TO USE INDUCTIVE LOADS IT IS NECESSARY TO CHOOSE AN INVERTER 5 TIMES MORE POWERFUL THAN THE APPLIED LOAD. FOR EXAMPLE, IF YOU WANT TO USE AN INDUCTIVE LOAD OF 1000W THEN A 5000W INVERTER IS NECESSARY.
