International VC General Thinner 1Lt N702458COL305
Visit us in our shop
WE ARE AT YOUR DISPOSAL AT OUR POINT OF SALE
Not just online! Come and visit us also in the shop!
In our store you will find a wide selection of selected items and you will be assisted by our specialized staff with over a decade of experience in the nautical sector.
Everything for the boat ... deck equipment, anchoring and mooring, hydraulic and electrical systems, photovoltaics, stainless steel hardware, antifouling and paints, engine spare parts, on-board safety, sailing accessories, nautical instruments, GPS, depth sounders and much more!
We are in San Giorgio di Nogaro in the province of Udine, an important basin, located in the Bassa Friulana, bathed by the Corno river ... a few km from well-known destinations such as Lignano, Grado, Trieste etc.
Nautimarket Europe s.r.l., Via Marittima 17, 33058 San Giorgio di Nogaro (UD) Italy
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
VC® General Thinner is specifically formulated to dilute all VC® products where necessary and to clean equipment.
MORE INFORMATION VC General Thinner is suitable for thinning all VC products when necessary and for cleaning equipment. It can dissolve VC17m and may be used to remove VC17m if necessary. For our codes COL300, COL301, COL302, COL303, COL308, COL309, COL310, COL311, COL312, COL313.
PRODUCT INFORMATION
Colour YTA006
Specific Gravity 0.892
Volume Solids 0%
Typical Shelf Life 2 yrs
VOC 892 g/lt
Unit Size 1 Lt
DRYING/OVERCOATING INFORMATION
Drying
Overcoating
Substrate Temperature 5°C (41°F) 10°C (50°F) 23°C (73°F) 35°C (95°F)
Overcoating By Min Max Min Max Min Max Min Max
APPLICATION AND USE
Method: For surface cleaning, turn the cloth frequently to avoid spreading residues. Ventilation and Humidity Control: Ensure adequate ventilation during use. Some Important Points: No special restrictions. Compatibility/Substrates:
Suitable for use with all VC products.
TRANSPORTATION, STORAGE AND SAFETY INFORMATION
Storage GENERAL INFORMATION:
Exposure to air and extremes of temperature should be avoided. For the full shelf life of this product, close the container firmly between uses and ensure that the temperature is between 5°C/41°F and 35°C/95°F. Keep out of direct sunlight.
TRANSPORTATION:
The product should be kept in securely closed containers during transport and storage.
Safety:
GENERAL: Read the label safety section for Health and Safety Information.
DISPOSAL: Do not discard tins or pour paint into water courses, use the facilities provided. It is best to allow paints to harden before disposal.
VC General Thinner residue cannot be disposed of through the municipal waste route without prior permission.
IMPORTANT NOTES The information given in this sheet is not intended to be exhaustive. Any person using the product without first making further written enquiries as to the suitability of the product for the intended purpose does so at his own risk.
