Primer fillers and thinner

-25%
International Thinner 920 5Lt 458COL6505
Thinner Professional line. This product is a blen of organic solvents specifically designed for thinning and / or equipment cleaning in association with Perfection.
€188.55
€251.41
-25%
International VC General Thinner 1Lt N702458COL305
International VC General Thinner is suitable for thinning all VC products when necessary and for cleaning equipment. It can dissolve VC17m and may be used to remove VC17m if necessary. Unit Size 1 Lt
€34.67
€46.23
-25%
International Thinner No.3 1Lt N702458COL652
Thinner No.3 is suitable for thinning Antifoulings, Bottom Coatings and other Special Paints such as Micron Extra, Micron CSC, Micron WQ, Cruiser Premium, Cruiser Superior, Cruiser,etc..
€20.35
€27.13
-25%
International 600 Wipe Down Solvent 5Lt 458COL6507
Thinner Professional Line International. Professional cleaning solvent formulated to remove grease and remove waxes, oils and sanding residue from the surface prior to application of Perfection.
€102.27
€136.36
-25%
International VC Tar2 Primer 1lt N702458COL307
Epoxy primer that creates an excellent barrier to water for osmosis protection and treatment; also it offers good corrosion protection of steel surfaces and light alloys. It is used only in hull.
€58.25
€77.67
-25%
International Primocon Primer 750ml N702458COL653
Conventional tar free primer, quick drying. Suitable for application on all the surfaces below the waterline, on which it also carries out an effective anti-corrosive action.
€34.26
€45.68
-25%
International Non Slip Additive 23gr 458COL1132
Non-Slip Additive is a synthetic granular material that can be added to the enamel finishing or sieved prior to application on the paint film still wet as an additive for a non-slip finish.
€8.67
€11.56
-25%
International Interfill 833 Part A 5 Lt 458COL1125
Interfill 833 is a stucco finish, easy to sand for use over Interfill 830 to correct minor imperfections before applying the finishing coats. Easy to sand. Interfill 833 may be applied by trowel, hand or stick to a thickness of 0.3 cm.
€341.79
€455.72
-25%
International Interfill 833 Part B 5 Lt 458COL1126
Interfill 833 is a stucco finish, easy to sand for use over Interfill 830 to correct minor imperfections before applying the finishing coats. Easy to sand. Interfill 833 may be applied by trowel, hand or stick to a thickness of 0.3 cm.
€341.79
€455.72