ZEP Paroxide Rust converter 1Lt 488COL1033
Visit us in our shop
WE ARE AT YOUR DISPOSAL AT OUR POINT OF SALE
Not just online! Come and visit us also in the shop!
In our store you will find a wide selection of selected items and you will be assisted by our specialized staff with over a decade of experience in the nautical sector.
Everything for the boat ... deck equipment, anchoring and mooring, hydraulic and electrical systems, photovoltaics, stainless steel hardware, antifouling and paints, engine spare parts, on-board safety, sailing accessories, nautical instruments, GPS, depth sounders and much more!
We are in San Giorgio di Nogaro in the province of Udine, an important basin, located in the Bassa Friulana, bathed by the Corno river ... a few km from well-known destinations such as Lignano, Grado, Trieste etc.
Nautimarket Europe s.r.l., Via Marittima 17, 33058 San Giorgio di Nogaro (UD) Italy
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
ZEP Paroxide is a rust converter. Chemically converts rust into a dry protective film which makes the surface ready for painting without further primer. The formula is a high concentration of active ingredients, has a high penetrating power through the rust and perfectly adheres to the treated surfaces. It is not toxic or flammable.
Method of use:
Remove any rust and flaky parts with a brush. Stir well. Apply evenly with a brush, roller, or spray, just like a normal paint. If the oxide layer is very thick, in order to achieve the best results it is necessary to apply two coats of the product. For metal surfaces that are not rusty and before applying PAROXIDE, it is recommended to degrease carefully with a 10% solution of RUSTOFF or KYMAX SPECIAL. Then rinse and allow to dry. Applying PAROXIDE when it is hot, dilute with 20% water.
Applications:
Wherever there is a rust problem: construction, industry, swimming pool sector, transport, general maintenance etc.
| Physicochemical properties | Values |
| Form | Liquid |
| Color | Brown |
| Odor | Characteristic |
| Density (20°C) | 1,07 g/cm3 |
| Miscibility in water | Soluble |
| pH | 1,6 ± 0,5 |
| Yield 20 m | 2/litro |
| Drying time | 24 hours |
| Painting time | 3 days |
Unit size 1 lt.
