San Marco RugiStop Rust Converter 750ml 488COL1032
Visit us in our shop
WE ARE AT YOUR DISPOSAL AT OUR POINT OF SALE
Not just online! Come and visit us also in the shop!
In our store you will find a wide selection of selected items and you will be assisted by our specialized staff with over a decade of experience in the nautical sector.
Everything for the boat ... deck equipment, anchoring and mooring, hydraulic and electrical systems, photovoltaics, stainless steel hardware, antifouling and paints, engine spare parts, on-board safety, sailing accessories, nautical instruments, GPS, depth sounders and much more!
We are in San Giorgio di Nogaro in the province of Udine, an important basin, located in the Bassa Friulana, bathed by the Corno river ... a few km from well-known destinations such as Lignano, Grado, Trieste etc.
Nautimarket Europe s.r.l., Via Marittima 17, 33058 San Giorgio di Nogaro (UD) Italy
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
RUGISTOP is an emulsion-based product which transforms rust into metal-organic compounds which adhere perfectly to the surface.
RUGISTOP blocks formation of rust on surfaces which are not easy to clean, doing away with tiring sanding and buffing. The product is suitable for treating ferrous surfaces such as railings, radiators, car bodies, etc.. The product is easy to apply and does not ruin painted parts.
INSTRUCTIONS FOR USE
The product can be applied on ferrous surfaces in general.
TECHNICAL SPECIFICATIONS
- Specific gravity per UNI EN ISO 2811-1: 1.03 ± 0.02 kg/l
- Outflow rate UNI 8356: 12-13"Ford cup n 4 at 25 C
- Appearance: milky liquid
- Drying (at 25 C and 65% R.H.): touch dry after 2 hours;
coatability after 24 hours and no more than 4 weeks after
application.
PREPARING THE SURFACE
Ferrous metal:
- Remove any compact and adherent calamine.
- Remove any grease from the surfaces using nitro thinner.
- Apply the RUGISTOP rust converter.
APPLICATION INSTRUCTIONS
Air and surface conditions:
Air temperature: Min. +5 C / Max.+35 C.
Relative humidity of the air: <80%.
Temperature of the surface: Min. +5 C / Max. +35 C.
Dry surface.
- Stir the product before use.
- The product can be applied with a brush, or applied by means of roller coating or spraying.
- Thinning: ready to be used.
- N coats: a single coat should be applied.
- Tools should be cleaned immediately after use using water.
- Indicative spreading rate: 8-10 sq m/l on smooth surfaces.
It is advisable to perform a preliminary test on the specific surface in order to determine the actual consumption.
5900100 RUST CONVERTER
Unit size 750 ml.