Teak Wonder Cleaner for teak 4Lt N722467COL508
zoom_out_map
chevron_left chevron_right
-10%

Teak Wonder Cleaner for teak 4Lt N722467COL508

Teak Wonder Cleaner is a powerful cleanser that thoroughly cleans the teak without the need for sanding. The product is neither caustic nor aggressive, and will not damage rubber seals, paint or hardware. 4 Lt.

€40.08 VAT included

€32.85 VAT excluded

€44.53-10%

Il Nostro Negozio

Visit us in our shop

WE ARE AT YOUR DISPOSAL AT OUR POINT OF SALE
Not just online! Come and visit us also in the shop!

In our store you will find a wide selection of selected items and you will be assisted by our specialized staff with over a decade of experience in the nautical sector.
Everything for the boat ... deck equipment, anchoring and mooring, hydraulic and electrical systems, photovoltaics, stainless steel hardware, antifouling and paints, engine spare parts, on-board safety, sailing accessories, nautical instruments, GPS, depth sounders and much more!

We are in San Giorgio di Nogaro in the province of Udine, an important basin, located in the Bassa Friulana, bathed by the Corno river ... a few km from well-known destinations such as Lignano, Grado, Trieste etc.

Nautimarket Europe s.r.l., Via Marittima 17, 33058 San Giorgio di Nogaro (UD) Italy

Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)

Teak Wonder Cleaner for teak
Teak cleaning is normally a problem that is often solved by drastic methods such as sanding or the use of powder or extremely caustic detergents which will eventually severely damage the surface.

TEAK WONDER® CLEANER is a powerful cleanser that thoroughly cleans the teak easily and with very little effort, without the need for sanding. The product is neither caustic nor aggressive, and will not damage rubber seals, paint or hardware. The grey oxidisation and dirt are removed in a few minutes.
The cleaning process is carried out by wetting the surface to be cleaned thoroughly with fresh water, then apply the cleaner evenly and brush the deck with a soft bristle brush, across the grain (do not apply too much pressure, this avoids damaging the teak fibres).  Rinse the soapy solution off with plenty of fresh water and do not allow the wood to dry prior to starting the brightening process.
On heavily soiled surfaces, which have significant oxidisation or have not been cleaned for a long time, a second cleaning may be necessary before starting the brightening process.

Carefully wash away any product left on non teak surfaces.
The coverage is approximately 6-8 m2/ltr (depending on the condition of the wood).

Unit size 4 lt.

N722467COL508
8025223428440