Veneziani Gel Gloss Pro Enamel A+B 0,75 Lt Marlin Blue 112 473COL306
zoom_out_map
chevron_left chevron_right
-15%

Veneziani Gel Gloss Pro Enamel A+B 0,75 Lt Marlin Blue 112 473COL306

High quality enamel with excellent resistance to industrial and marine atmosphere, aging and ultraviolet rays. Non-yellowing, excellent chemical and mechanical resistance and gloss retention.

€64.33 VAT included

€52.73 VAT excluded

€75.68-15%

Il Nostro Negozio

Visit us in our shop

WE ARE AT YOUR DISPOSAL AT OUR POINT OF SALE
Not just online! Come and visit us also in the shop!

In our store you will find a wide selection of selected items and you will be assisted by our specialized staff with over a decade of experience in the nautical sector.
Everything for the boat ... deck equipment, anchoring and mooring, hydraulic and electrical systems, photovoltaics, stainless steel hardware, antifouling and paints, engine spare parts, on-board safety, sailing accessories, nautical instruments, GPS, depth sounders and much more!

We are in San Giorgio di Nogaro in the province of Udine, an important basin, located in the Bassa Friulana, bathed by the Corno river ... a few km from well-known destinations such as Lignano, Grado, Trieste etc.

Nautimarket Europe s.r.l., Via Marittima 17, 33058 San Giorgio di Nogaro (UD) Italy

Politiche per la sicurezza
(modificale nel modulo Rassicurazioni cliente)
Politiche per le spedizioni
(modificale nel modulo Rassicurazioni cliente)
Politiche per i resi
(modificale nel modulo Rassicurazioni cliente)

MORE INFORMATION

GEL GLOSS PRO ENAMEL 

Gel Gloss Pro is a two-component polyurethane finish. A high quality enamel with excellent resistance to marine and industrial environment, to ageing and to ultraviolet rays. Does not yellow, is very flexible and retains its gloss. Excellent levelling gives improved aesthetic appearance to topsides, decks, superstructures etc. Gel Gloss Pro can be applied directly to gel coats or to epoxy or polyurethane primers (Epoply,Polygoal). A wide range of colours, which can be blended, is available. Not suitable for continuous water immersion.
Excellent expansion giving an improved aesthetic appearance to topsides, decks, superstructures with specular and shiny surfaces.
Direct application on gel coats or epoxy or polyurethane Plastolite Pro (our code COL222, COL2222), Polyrex Pro (our code COL208, COL209).
A wide range of colours, which can be blended, is available. Not suitable for continuous water immersion.
Application of 2 coats (3 for more coverage) is recommended.
Theoretical yield of 13.5 sqm/lt.
Specific gravity 1.29.
Minimum recoating time 7 hours at 20 ° C.
Recommended thinner 6700, our code COL255, for spray application; for application by roller or brush thinner 5780 is recommended, our code COL252.
Not suitable for continuous immersion.
Unit size  0.75 lt.

TECHNICAL DATA
Specific weight: 1.29 ± 0.02 Kg / L
Solids by volume: 54%
Colour: refer to colour chart
Unit size: 0,75 L / 2,50 L

APPLICATION: Apply with: brush - roller - conventional - airless spray
Drying time at 20°C: 7 hours
Pot life (20 ° C): 3-4 hours
Mixing ratio by volume: 3: 1 ratio by weight: 80: 20
Thinner: 6700 (Spray - Airless) or 6780 (roller - brush)
Thickness dry film per coat: 35-40 μ
Theoretical coverage per coat: from 15.4 to 13.5 m2/L
Recoating time at 20 ° C: min 3-4 hours max 48 hours
Number of coats: 2 (3 for more coverage )
- GREAT EXPANSION SPRAY AND BRUSH
- EXCELLENT MECHANICAL AND CHEMICAL RESISTANCE
- MAINTAINS GLOSS
- GOOD COVER
- CAN BE MIXED WITH OTHER COLOURS
- NON-SLIP FINISH WITH ADDITIVE

Unit size 0,75Lt.
Colour: Marlin Blue 112.

Veneziani
473COL306
8025223434120