Veneziani WOOD VB-SHINE 7W6.321 750ml Two-component Gloss Varnish YM473COL504
Veneziani WOOD VB-SHINE 7W6.321 two-component gloss varnish for wood based on polyurethane resins with excellent gloss retention, for application in highly stressed areas such as handrails and borders, 750ml.
Visit us in our shop
WE ARE AT YOUR DISPOSAL AT OUR POINT OF SALE
Not just online! Come and visit us also in the shop!
In our store you will find a wide selection of selected items and you will be assisted by our specialized staff with over a decade of experience in the nautical sector.
Everything for the boat ... deck equipment, anchoring and mooring, hydraulic and electrical systems, photovoltaics, stainless steel hardware, antifouling and paints, engine spare parts, on-board safety, sailing accessories, nautical instruments, GPS, depth sounders and much more!
We are in San Giorgio di Nogaro in the province of Udine, an important basin, located in the Bassa Friulana, bathed by the Corno river ... a few km from well-known destinations such as Lignano, Grado, Trieste etc.
Nautimarket Europe s.r.l., Via Marittima 17, 33058 San Giorgio di Nogaro (UD) Italy
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
Veneziani WOOD VB-SHINE 7W6.321 Two-component Gloss Varnish for wood
Polyurethane-resin-based two-component transparent varnish with excellent gloss retention. Bestowed with exceptional technical characteristics such as elasticity and mechanical strength, it can be used both on wood and on other surfaces that are appropriately prepared and under strict operating conditions. Thanks to its high abrasion resistance, it is recommended for application in highly stressed areas such as handrails and borders.
Application: brush, roller or spray.
TECHNICAL SPECIFICATIONS
Theoretical coverage: 9,0 m2L
Mixing ratio: 2:1
Recoating time: 6h - 2days (20°C)
Hard dry: 24h
Thinner: 6780 - 6700
SURFACE PREPARATION
New wood or renewed: the support must be perfectly dry, the humidity of the wood must not be over 18%. All the surfaces to paint must be cleaned, dry and free from any trace of contaminants. Sand down with P80-P120 sanding paper. Before proceeding with the application of the provided products, blow using dry and clean air, in order to remove every trace of sanding and dirt. Apply the first coat of VB-SHINE diluted 10 - 15%. Proceed with the following coats (3-5 coats) as well as explained.
Painted wood : sand down in order to eliminate every varnish trace during the stripping vessel phase; apply the first coat of VB-SHINE, diluted 5% than proceed with the following coats (2-
4 hands) as before.
N.B: Between the coats, use abrasive Scotch Brite fine (grey).
Pack 750 ml.
