Veneziani WOOD R-FIBERS 7W6.711 750ml Synthetic microfibers for RESINA 3+ YM473COL515
Veneziani WOOD R-FIBERS 7W6.711 Synthetic microfibers for RESINA 3+ can be used for fillet type structural bonding (for boding T joints) where a high density structural filler and strong structure is required, White .001, 750ml.
Visit us in our shop
WE ARE AT YOUR DISPOSAL AT OUR POINT OF SALE
Not just online! Come and visit us also in the shop!
In our store you will find a wide selection of selected items and you will be assisted by our specialized staff with over a decade of experience in the nautical sector.
Everything for the boat ... deck equipment, anchoring and mooring, hydraulic and electrical systems, photovoltaics, stainless steel hardware, antifouling and paints, engine spare parts, on-board safety, sailing accessories, nautical instruments, GPS, depth sounders and much more!
We are in San Giorgio di Nogaro in the province of Udine, an important basin, located in the Bassa Friulana, bathed by the Corno river ... a few km from well-known destinations such as Lignano, Grado, Trieste etc.
Nautimarket Europe s.r.l., Via Marittima 17, 33058 San Giorgio di Nogaro (UD) Italy
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
Veneziani WOOD R-FIBERS 7W6.711 Synthetic microfibers for RESINA 3+
Synthetic microfibers are part of the additive range to be used in addition to RESINA 3+, to obtain compounds with different characteristics. They have an average length of 500 microns and, when mixed with RESINA 3+, reinforce its structure by creating a multidirectional network within the compound; at the same time, being low absorption, they do not alter the penetration characteristics in the RESINA 3+ surface. They can be used for "fillet" type structural bonding (for boding "T" joints) where a high density structural filler and strong structure is required.
TECHNICAL SPECIFICATIONS
Product code: W6711
Colour: White .001
Solids (by volume): ASTM D2369 100%
Pack: 0,75 Lt
APPLICATION PROCEDURE
Add the additive to RESINA 3+ only after carefully mixing component A and component B in a 2:1 ratio.
Fluid glue: Mix 2 parts of catalyzed RESINA 3+ + 1 part of R-Fibers to obtain a fluid glue suitable for gluing surfaces with small imperfections.
Structural bonding: Mix 1 part of catalyzed RESINA 3+ + 1 part of R-Fibers to obtain a light structural compound suitable for bonding surfaces with large imperfections.
High-density structural bonding: Mix 1 part of catalyzed Resin 3+ + 2 parts of R-Fibers to obtain a high-density structural compound capable of remaining in position even in vertical applications.
