Veneziani WOOD Resina 3+ 7W6.721 A+B 1.5L .000 Wood protector YM473COL512
Veneziani WOOD Resina 3+ 7W6.721 A+B Insulating and protective product for wood designed to build, protect and restore wood, fibreglass and many other surfaces, .000 trasparent, 1.5L.
Visit us in our shop
WE ARE AT YOUR DISPOSAL AT OUR POINT OF SALE
Not just online! Come and visit us also in the shop!
In our store you will find a wide selection of selected items and you will be assisted by our specialized staff with over a decade of experience in the nautical sector.
Everything for the boat ... deck equipment, anchoring and mooring, hydraulic and electrical systems, photovoltaics, stainless steel hardware, antifouling and paints, engine spare parts, on-board safety, sailing accessories, nautical instruments, GPS, depth sounders and much more!
We are in San Giorgio di Nogaro in the province of Udine, an important basin, located in the Bassa Friulana, bathed by the Corno river ... a few km from well-known destinations such as Lignano, Grado, Trieste etc.
Nautimarket Europe s.r.l., Via Marittima 17, 33058 San Giorgio di Nogaro (UD) Italy
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
(modificale nel modulo Rassicurazioni cliente)
Veneziani WOOD Resina 3+ 7W6.721 A+B Insulating and protective product for wood
Solvent-free structural epoxy product designed to build, protect and restore wood, fibreglass and many other surfaces. Resina 3+ is a technologically advanced product that has excellent penetration, flexibility and adhesion characteristics that make it indispensable for maintenance. Wood treated with Resina 3+ is made waterproof and reinforced while maintaining its flexibility and strength characteristics. With Resina 3+ you can obtain high-strength bonding, surface protections and waterproofing of the hull. Once catalysed, it can be mixed with its additives to obtain easy-to-apply and extremely strong fillers.
Application: brush and roller.
TECHNICAL SPECIFICATIONS
Theoretical coverage: 10,0 m2L colours
Mixing ratio: 2:1
Recoating time: 8 - 24h (20°C)
Hard dry: 24h
Thinner: 6610 solo per pulizia attrezzi
Finish: Glossy
Color: trasparent .000
Pack: 1.5 liters
SURFACE PREPARATION
Before using with Resina 3+, the support must be dry and the moisture of the wood must not exceed 18%. All surfaces to be painted must be clean and free of contaminants. Sand down with P80-P120 paper. Before proceeding with the application of the products, blow with clean and dry air to remove any residue of sanding and dirt.
APPLICATION PROCEDURE
Mix the base and hardener in a ratio of 2:1 by volume or 70:30 by weight. The duration of the catalyzed mixture is 30 minutes at 20°C. Do not dilute. Use Thinner 6610 for cleaning tools. For the waterproofing cycle, apply 3-4 coats for a final thickness of 300-400 microns.
Note: In case a greasy surface coating between one coat and the next of RESINA 3+ is formed, wash with clean hot water. The drying time of the product depends on the temperature at which the application is performed. For the preparation of the filler, add to RESINA 3+ (already catalysed) the quantity of Microsfere needed to obtain the desired
viscosity. During the crosslinking process the epoxy resin develops heat due to the chemical reaction. The amount of developed heat depends on the mixed quantity of resin and the applied thickness. For large quantities, the temperatures reached can be such as to cause
burns, it is advisable to work with the maximum care, catalyzing a small quantity at a time and using low and wide containers to facilitate heat dispersion.
