Pumps for oil and gasoil pouring

UP3 24V 3A Self-priming electric pump with bronze gears for transferring of liquids for transfer of diesel fuel, antifreeze, self-priming 1.5mt, pressure 2bar, Marco 16400013.

UP3/OIL 24V 3A Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids, self-priming 1mt, pressure 2bar, Marco 16402013.

UP8-RE 12-24V 4A Reversible electronic pump 10l/min and 3,5 bar with flow regulation, self-priming 1.5m, Marco 16409515.

UP6/OIL 24V 4A Oil pump draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations, self-priming 1.5mt, pressure 5bar, Marco 16408013.

Marco UP9 12V 5A Self-priming electric pump 12l/min with bronze gears for transfer of diesel fuel and antifreeze, self-priming 1.5m, pressure 5 bar. Marco 16410012.

UP2/OIL 12V 2.5A Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids, self-priming 1m, pressure 1.5 bar, Marco 16422012.

Marco UP9 24V 3A Self-priming electric pump 12l/min with bronze gears for transfer of diesel fuel and antifreeze, self-priming 1.5m, pressure 5 bar. Marco 16410013.

UP10-XA 24V 5A AISI 316 Stainless Steel Self-priming electric pump 18l/min for transferring of liquids up to 7 bar pressure, self-priming 3m, Marco 16440313.

UP10-XA 12V 11A AISI 316 Stainless Steel Self-priming electric pump 18l/min for transferring of liquids up to 7 bar pressure, self-priming 3m, Marco 16440312.

Marco UP6/E 24V 5A 16462213 Self-priming automatic electric pump with electronic control, fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

OCK1-E 12-24V Reversible Oil Diesel Transfer Kit 15l/min capacity, pressure 2 bar, self-priming 1m, Mark 16493115.

Marco UP6/E 12/24V 10/5A 16462215 Self-priming automatic electric pump with electronic control, fresh water pressure systems and shower kits on boats, rubber dinghies, sailing boats and campers.

Superior quality manual oil change pump in turned brass. Length 255mm. Pipe-to-Hose Ø 3/4".

OCK8-E 12-24V 4A Reversible electronic oil change kit 10l/min with flow regulation for oil and diesel transferring, pressure 3.5 bar, self-priming 1.5m, Mark 16493615.

Large capacity oil change manual pump with ports and tubing.
Reinforced Plastic body. Lenght 390mm.

Oil change pump with 6 Lt tank with ports and tubing. Height 560mm. Diameter 230mm.

Fuel transfering bellows pump with non return valve and faucet.

UP3/OIL 12V 5A Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids, self-priming 1mt, pressure 2bar, Marco 16402012.

UP6/OIL 12V 7A Oil pump draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations, self-priming 1.5mt, pressure 5bar, Marco 16408012.

Oil change pump. Made of brass with removable tubing for easy operation. 80cc capacity for every pumping. Designed to fit engine dipstick tube. Lenght 23 cm.

UP2/OIL 24V 1.3A Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids, self-priming 1m, pressure 1.5 bar, Marco 16422013.

Manual oil change Brass pump for any outboard or sterndrive with 16 (3/8") drain screw. Perfect for use with 946 ml oil bottles, complete with Yamaha adaptor. Length 150mm.

Pump for gasoil pouring 12V 155W. Flow 40l/min. Max intake 3m. Head 10m. Dimensions 230x160x180mm.

Double acting hand pump, designed to suction oil. Length 39cm. Fitted with nylon hose for fitting onto oil sidepiece and drainage pipe; also suitable for draining needy bilges.

Reversible self-priming pump for oil emptying and diesel oil transfer. 12V. Flow 8 l/min. Current draw 4/8 A. Self-priming up to 0,8m. Oil is tapped through the dipstick. Fitted with 14-mm hose adaptor.

Pump for gasoil pouring 24V 155W. Flow 40l/min. Max intake 3m. Head 10m. Dimensions 230x160x180mm.

Hose set for Oil Gasoil pump.

12V oil change Set. The set contains: 13.5-l plastic tank, electric pump,fitted with 2.10-m cable and battery clips, suction hose from the dipstick, drain hose.

Oil vacuum extractor. Volume 6L. This ingenious device pumps the exhausted oil off the engine. Oil is tapped through the dipstick and the vacuum pump located on top collects it into the spherical container.

Extractor Pump with plastic tank for bailing oil/water. Package with connecting tubes. Capacity 6lt. Dimensions: Height 560mm, Ø230mm.

Extractor Pump with plastic tank used to extract used engine oil by means of the built-in tank. Tank capacity 4,5 lt. Works by creating a vacuum with a manual plunger.