Home
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
Weight
Weight
Price
Price
Selected products
Set 2 pieces of Anodized light alloy symmetrical fairlead - 210x38mm N11102500249-2
€29.90 €44.09 -32.18%
Stainless steel Capri Straight roller fairlead Bow Rope up to Ø 22mm OS4030500
€141.34 €172.36 -18%
Special Products
0-5 adjustable stainless steel base for Glomex Sat Antennas FNI5509500
€547.74 €608.60 -10%
0,75l Accumulator tank Max pressure 8,6 bar N43838601058
€31.39 €38.28 -18%
1/2 inch bronze non-return valve N43437601077
€40.70 €45.23 -10%
10 pins for Q-SNAP tool for correct positioning of fasteners OS1030016
€67.93 €82.84 -18%
10 plastic caps for Q-SNAP snap fasteners OS1030017
€24.17 €29.48 -18%
10 Prym press fasteners male + female for fabric OS1030102
€14.43 €17.59 -18%
10-30VDC Universal chain counter radio control IP67 868MHz OS0236801
€447.67 €621.76 -28%
100 piece Set CFL Fluorescent Bulbs 15W 12V 6400K Cold Light E27 ET27550320100
€99.00 €418.95 -76.37%
100 piece Set CFL Fluorescent Bulbs 15W 24V 2700K Warm Light E27 ET27550321100
€99.00 €418.95 -76.37%
Bilge pumps and accessories
Subcategories
Immersion bilge pumps
Immersion bilge pumps
Self-priming bilge pumps
Self-priming bilge pumps
Manual bilge pumps
Manual bilge pumps
Floating switches and accessories
Floating switches and accessories
There are 33 products.
Marco IMP2 NBR Rubber impeller for UP1-J Self-priming electric pump N40352014240
Marco IMP2 NBR Rubber impeller for UP1-J 12V and 24V Self-priming electric pumps, Ø40,5xh22mm, bore Ø8mm, Marco 16300100.
€21.41
€23.79
Marco IMP1 NBR Rubber impeller for UP1 UP1-M UP1/AC Self-priming pumps N40352014241
Marco IMP1 NBR Rubber impeller for Marco UP1, UP1-M and UP1/AC Self-priming electric pumps, Ø51,5xh22mm, bore Ø8mm, Marco 16300000.
€30.96
€34.40
Rule 1100GPH 27S Fully automatic submersible pump 12V 70 Lt/min 38522501
Rule 1100GPH fully automatic submersible pump - 70 Lt/min - Model 27S
€243.51
€304.39
Rule 500GPH 25SA Fully automatic submersible pump 12V 32Lt/min 38522500
Rule 500GPH Fully automatic submersible pump 500GPH 12V 32 Lt/min. Model 25SA. Hose Ø 19mm. Dimensions: Ø 57x90H mm
€163.77
€204.72
Rule 2000GPH 10 submersible pump 12V 12A 130Lt/min 38522540
Rule 2000GPH submersible pump. Suitable for heavy loads with high capacity. Power supply 12V. Electric input 12A. Dimensions D.110xH150 mm. Delivery capacity 130 Lt/min. Hose connector D.1 1/8".
€217.48
€255.86
Rule 1500GHP 02 submersible bilge pump 12V 7A 100Lt/min 38522545
Rule 1500GHP submersible bilge pump - 12V - 100Lt/min - Model 02
€179.18
€248.86
Rule 2000GHP 12 submersible bilge pump 24V 130Lt/min 38522541
Rule 2000GHP submersible bilge pump - 24V - 130Lt/min - Model 12
€235.23
€276.74
Marco UP3700 24V 6A Submersible Bilge Pump 230l/min Lift 5m MC16018013
UP3700 24V 6A Submersible Bilge Pump 230l/min for bilge emptying with ABS material housing, corrosion resistant, size Ø110x202mm, lift 5m, Marco 160 180 13.
€179.34
€256.20
Marco UP500 12V 2.5A Submersible Bilge Pump 32l/min Lift 4m N44438522490
UP500 12V 2.5A Submersible Bilge Pump 32l/min for bilge emptying with ABS material housing, corrosion resistant, size Ø59x94.5mm, lift 4m, Marco 160 100 12.
€36.67
€40.75
Marco UP2000 12V 12A Submersible Bilge Pump 126l/min Lift 4m N44438522496
UP2000 12V 12A Submersible Bilge Pump 126l/min for bilge emptying with ABS material housing, corrosion resistant, size Ø96x200mm, lift 4m, Marco 160 160 12.
€122.98
€136.64
Marco UP1500 12V 10A Submersible Bilge Pump 95l/min Lift 4m N44438522494
UP1500 12V 10A Submersible Bilge Pump 95l/min for bilge emptying with ABS material housing, corrosion resistant, size Ø96x160mm, lift 4m, Marco 160 140 12.
€88.94
€98.82
Marco UP1000 12V 4A Submersible Bilge Pump 63l/min Lift 4m N44438522492
UP1000 12V 4A Submersible Bilge Pump 63l/min for bilge emptying with ABS material housing, corrosion resistant, size Ø78x124.5mm, lift 4m, Marco 160 120 12.
€56.00
€62.22
23610 Jabsco Maxy Puppy 3000 Water pressure system 12V 45Lt/min 38601002
23610 Jabsco Maxy Puppy 3000 Water pressure system. Delivery capacity 45Lt/min. 12V power supply. Electrical input 21A
€813.33
€1,084.45
23610 Jabsco Maxy Puppy 3000 Water pressure system 24V 45Lt/min 38601001
Jabsco Maxy Puppy 3000 water pressure system made of bronze with high resistant nitrile impeller. High pressure and delivery capacity.Maximum self-priming 2,4 mt with supply of 2640 l/h
€813.33
€1,084.45
Jabsco PAR 37202 Self-priming diaphragm pump with membrane 12V 13Lt/min 38601310
Jabsco PAR 37202 Self-priming diaphragm pump with membrane suitable for small boats. Filter included. Delivery capacity 13 Lt/min. Power supply 12V. Electrical input 7,5A. Weight 2,5 Kg.
€652.09
€869.46
23680 Jabsco Water Puppy 2000 self priming pump 24V 32Lt/min 38601006
23680 Jabsco Water Puppy 2000 self priming pump with a maximum of 1,2 mt, with output of 1920 litres/hr. Capacity 32Lt/min. 24V power supply. Electrical input 7,5A.
€326.68
€408.35
Jabsco PAR 37202 Self-priming diaphragm pump with membrane 24V 13Lt/min 38601311
Jabsco PAR 37202 Self-priming diaphragm pump with membrane suitable for small boats. Filter included. Delivery capacity 13 Lt/min. Power supply 24V. Electrical input 4A. Weight 2,5 Kg.
€652.09
€869.46
Marco UP1-B 12V 14A Ballast pump with rubber impeller 45l/min MC16200312
UP1-B 12V 14A Self-priming electric water pump 45l/min with selflubricating flexible impeller for prolonged service life and better performance, self-priming 1.5m. Marco 16200312.
€162.26
€231.80
Marco UP1 24V 5A Bilge Pump Capacity 35l/min 1.2bar MC16200213
UP1 24V 5A Self-priming electric water pump with rubber impeller 35 liters/minute, self-priming 1.5m, IP67, 180W motor power. Marco 162 002 13.
€152.01
€217.16
Marco UP1/AC 220V 50Hz 3.3A Pump rubber impeller 30l/min MC1620011C
UP1/AC 220V 50Hz 3.3A Self-priming electric pump for transfer of fresh or salt water with flexible impeller of nitrile rubber, self-priming 1.5m. Marco 1620011C.
€341.60
€488.00
Marco UP1-B 24V 7A Ballast pump with rubber impeller 45l/min MC16200313
UP1-B 24V 7A Self-priming electric water pump 45l/min with selflubricating flexible impeller for prolonged service life and better performance, self-priming 1.5m. Marco 16200313.
€162.26
€231.80
Marco UP1-M 24V 7A Self-priming electric pump 45l/min with rubber impeller MC16200613
UP1-M 24V 7A Self-priming electric pump 45l/min with rubber impeller for bilge and waste water on any type of boat, self-priming 1.5m. Marco 16200613.
€184.46
€263.52
Marco UP1-M 12V 14A Self-priming electric pump 45l/min with rubber impeller MC16200612
UP1-M 12V 14A Self-priming electric pump 45l/min with rubber impeller for bilge and waste water on any type of boat, self-priming 1.5m. Marco 16200612.
€184.46
€263.52
Marco UP1-JS 24V 4A Impeller pump 28l/min with integrated ON OFF Switch MC16201013
UP1-JS 24V 4A Professional self-priming electric pump 28l/min for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated, self-priming 1.5m. Marco 16201013.
€165.80
€184.22
Marco UP1-JS 12V 8A Impeller pump 28l/min with integrated ON OFF Switch MC16201012
UP1-JS 12V 8A Professional self-priming electric pump 28l/min for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated, self-priming 1.5m. Marco 16201012.
€165.80
€184.22
Marco UP1-JR 24V 4A Reversible impeller pump 28l/min with ON OFF Switch MC16201113
UP1-JR 24V 4A Self-priming electric pump 28l/min for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap, self-priming 1.5m. Marco 16201113.
€129.81
€185.44
Marco UP1-JR 12V 8A Reversible impeller pump 28l/min with ON OFF Switch MC16201112
UP1-JR 12V 8A Self-priming electric pump 28l/min for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap, self-priming 1.5m. Marco 16201112.
€166.90
€185.44
Marco UP1-J 12V 8A Bilge Pump with rubber impeller 28l/min 1bar N40338522938
UP1-J 12V 8A Self-priming electric pump with rubber impeller 28 liters/minute, ISO 8849 and ISO 8846, self-priming 1.5m, IP67, 150W motor power. Marco 16200412.
€144.94
€161.04
23680 Jabsco Water Puppy 2000 self priming pump 12V 32Lt/min N40338601007
23680 Jabsco Water Puppy 2000 self priming pump. Output 32Lt/min. 12V power supply. Electrical input 13A.
€326.68
€408.35
Marco UP1 12V 10A Self-priming Water pump with rubber impeller 35l/min N40338522940
UP1 12V 10A Self-priming electric water pump with rubber impeller 35 liters/minute, self-priming 1.5m, 1.2 bar, IP67, 180W motor power. Marco 162 002 12.
€152.01
€217.16
Marco AS3 12-24V Automatic float switch for bilge pump N40338501036
AS3 automatic float switch for bilge pump 12-24V, maximum electric input 14A, 127x42x110mm, cable section 90cm, 19-51mm Off-On. Marco 161 002 20.
€34.48
€38.31
Marco UP2000 24V 6A Submersible Bilge Pump 126l/min Lift 4m N44438522497
Marco UP2000 24V 6A Submersible Bilge Pump 126l/min for bilge emptying with ABS material housing, corrosion resistant, size Ø96x200mm, lift 4m, Marco 160 160 24.
€130.34
€186.20
Marco UP1500 24V 5A Submersible Bilge Pump 95l/min Lift 4m MC16014013
UP1500 24V 5A Submersible Bilge Pump 95l/min for bilge emptying with ABS material housing, corrosion resistant, size Ø96x160mm, lift 4m, Marco 160 140 13.
€94.87
€105.41