Best sellers

Hydrofoil Sting Ray Starfire 1. Up to -50% gliding time. Reduced bow angle since the outboard engine increases the upward thrust on the stabilizer. No pitching. No cavitation. Stabilization of the boat during navigation. Reduced fuel consumption.

Auto Trim pair flaps made of crosslinked polyethylene and are self-adjustable. Recommended for vessels up to 6 mt long. Dimension 255x210 mm.

Additional Bennett hydraulic cylinder

Bushing made of white plastic to join flexible PVC pipe.

Steering wheel made of shock resistant plastic material. According to EEC directive 94/25. Standard cone 3/4". Black rigid handle. D.335 mm. Stick out 92 mm.

Steering wheel nonmagnetic made of stainless steel. According to ECC directive 94/25. Standard cone 3/4". Black polyurethane handle. D.350 mm. Stick out 85 mm.

T26 Marine Steering Wheel/Helm Ø 350mm with six curved spokes Ø 16mm in mirror-polished stainless steel. Stainless steel hub covered with real leather and lid with wind rose logo in the middle. Soft polyurethane grip. White colour.

Chrome-plated brass double lever control box, throttle + gearbox for one engine. Uses cables C2 - C7 - C8 - Mach Zero - C22 - 33C. Dimensions: A= 75, B= 165, C= 137, D= 95, E= 130, F= 110 mm.

Kit consisting of Quick BTQ 125-40 electric bow thruster kit 12V 2.2 Kw, 40 Kgf thrust, with push-button remote control, bow thruster tunnel Ø125 mm L.750mm, control extension cable, fuse and fuse holder. Boat length 7- 9 m (23-29 ft)

Kit composto di elica di manovra elettrica Quick BTQ 125-30 12V 1,5 Kw spinta 30 Kgf con comando elica a joystick, tunnel elica Ø125mm L.750mm, prolunga comandi TCD/TMS/TSC 6m, fusibile e portafusibile. Lunghezza imbarcazione 6-9 m (20-29 ft).

Quick BTQ 125-40 DC Single Propeller Bow Thruster 12 volt. Motor power 2,2 Kw. Thrust 40 Kgf. Single Propeller made in sturdy composite material. Recommended boat length 7- 9 m (23-29 ft).

Extension cable for remote controls and Quick thruster line TCD, TMS and TSC switch control system. Length 6 metres.

Hinge with bores made of mirror polished stainless steel. Width 30mm. Thickness 1,5mm. Bore Ø 3,5mm. Bore pitch 50. On center 19. Type with bores and countersunk. 2m bar.

Coat hanger with 4 swivelling hooks. Made of Polished brass. Plate 81x39mm.

Coat hanger with 3 swivelling hooks. Made of Polished brass. Plate 73x36mm.

Washing Kit tank S with built-in electric pump. 12V. Capacity 2.5lt. Dimensions: 125x145xH215 mm.

Plastic flush pull latches. Without lock. Black. Recess Ø 49,6mm. External Ø 61,4mm. Inner size 38,8mm. For thickness from 7 to 18mm. Made of white nylon, fitted with stainless steel lock stopper and two 2 mm stoppers.

Chrome-plated brass napkin lifter. Size: 39x45 mm.

316 polished stainless steel U-bolt calmp for 3mm cables. M3 Threaded. 10 piece pack.

Stainless steel snap shackle for sheets, halyards, spinnaker. Snap opening. A= 11mm, B= 6mm, L= 32mm.

Mirror polished stainless steel snap hook fitted with stainless steel spring, Version without eye. Dimensions: D= 4mm, L= 40mm, A1= 6mm, A= 5mm, E= 7mm. 10 piece pack.

AISI 316 Snap-shackle for spinnaker with eye. Size: A= 16mm, B= 12mm, L= 66mm.

Carbine hooks made of mirror polished AISI 316 stainless steel 6x60mm with spring and eyelet.

Carbine hooks made of mirror polished AISI 316 stainless steel 13x160mm with spring, without eyelet.

Polished stainless steel bow shackle. Forged and mirror polished. Dimensions: A= 16mm, B= 32mm, R= 56mm, L1= 64mm.

Stainless steel twisted shackle with screw-lock. Pin 8 mm. Lenght 58 mm. Width 17 mm.

Made of forged AISI 316 stainless steel, very sturdy, excellent finish, long torsion. Pin 6 mm

AISI316 Stainless steel U-bolt 135mm, Ø10xh75mm thread, 56mm wheelbase with two plates 70x20mm for deck applications.

Telescopic hatch stay. Suitable for nylon portholes and hatches, fitted with stainless steel sliding rod; this special sliding system ensures an extraordinary locking and a remarkable travel at the same time.

Stainless steel gas spring eye – eye. Open 600mm. Stroke 255mm. Response 40kg. Body 18mm. Rod Ø 8mm. Fitted with eye terminals with hole size 8 mm.

Stainless steel gas spring eye – eye. Open 600mm. Stroke 255mm. Response 20kg. Body 18mm. Rod Ø 8mm. Fitted with eye terminals with hole size 8 mm.

Stainless steel gas spring eye – eye. Open 355mm. Stroke 130mm. Response 24kg. Body 18mm. Rod Ø 8mm. Fitted with eye terminals with hole size 8 mm.

Table with 20 adhesive symbols, ideal to personalise switchboards. Dimensions 15x20mm.

Marine Code Sticker D.24x16cm

Navigation lights and light signals sticker chart. Italian language. Size: 160x240mm.

Code Sticker with international codes used in Races. Hard wearing and high clarity. Italian language only. Dimensions 16x24 cm.

Steering console in white fiberglass, fitted with mahogany plywood inserts, compatible with any wheel steering system, supplied with stainless steel handrail. Base 40x44cm. Height 81cm + 9cm of handrail.

Painted Steel Friction rotating base for seats, size 175x175mm.

Watertight inspection hatch with quick opening. External Ø 141mm. Passage 95mm. Made of AISI 316 stainless steel, 1/4 turn opening with winch handle. The cover remains attached to the winch handle on removal for ease of use.

Fire Port white plastic. External Ø 68mm. Hole 45mm. Mounting nut: white plastic. Designed to access the engine box with an extinguisher without opening the box.

Replacement door hatch lock with keys.

Classic rectangular hatch - 355x600mm - Without lock

Classic big square hatch. Recess 442x390 mm. External dimensions 463x517 mm. Without lock.