Best sellers

CRC Marine 6-66. Anti-corrosive for salty environments. Stops the corrosive process in progress and prevents new attacks from showing up, in particular if triggered by salts which are typical of a marine environment.

Boero Thinner 693 0.5Lt Thinner for Epoxies. For application by spray, brush and roller. Pack of 0.5lt.

Glossy topcoat for bilges based on particular resins that confers good chemical resistance, in particular to penetration of humidity, oils, fuel and detergents.

Two-component modified epoxy primer usable on all hull types. This product can be applied as primer or undercoat in painting systems. Its special feature is that it can be overcoated by any Boero antifouling even after a long time.

20A PWM charge controller for 12-24 Volt photovoltaic systems, equipped with LCD display and 2 USB output 5V/2A Max. Ideal for charging GEL, AGM or acid batteries via traditional 36 cell photovoltaic panels for 12V systems and 72 cells for 24V systems.

Biminis plastic T junction joint. White colour. For tubing Ø20 mm.

Deck sealing kit and screws for Whale Compact 50 pump.

Rule-Mate automatic submersible bilge pump 750GPH. Dimensions 19x9x12cm. Model RM750AM. A great benefit for all boaters!

White Nylon thru-hull fitting. Hose adaptor 19/20mm.

Marco IMP1 NBR Rubber impeller for Marco UP1, UP1-M and UP1/AC Self-priming electric pumps, Ø51,5xh22mm, bore Ø8mm, Marco 16300000.

Made of clear PVC, fitted with steel spiral; very soft, no crushing, curves equal to the outer diameter; ideal for sea cocks.

Made of clear PVC, fitted with steel spiral; very soft, no crushing, curves equal to the outer diameter; ideal for sea cocks.

BRAVO 2000 220V Electric Inflator. Functions: Inflation + deflation. 220V, W basic 1000, W with booster 2000. Flow Basic 1200l/min. Flow with booster 2000 l/min. Pressure Basic 2.0 PSI. Pressure with booster 5.8 PSI.

Control panel with black frame Vimar, suitable for AC monoblock unit 5000-16000 Btu/h R407C chill water air conditioning systems. Vitrifrigo WP502.5010.

Rose Zinc Anode for Rudder and Flaps for Bolt Mounting. Heavy Type. Size: H= 17mm, OD= 90mm, ID= 9mm. Weight: 0,415 Kg.

Plastic hinge - 40x90 mm - White colour

Self locking hook for shock cord. D.6 mm. Purple.

Stainless Steel Removable Self-locking pin 6x25mm, fitted with spring balls on one end and ring on the other end.

Flanged Joint with 2 flanges - Tube D.20mm - White

Replace gangway wheel - Hole Ø10mm

The Easystore Plus Mega Yacht Inflatable fenders are made of reinforced, abrasion resistant PVC material. They are light, simple to use and when deflated can be stowed in small lockers. ⌀ 28cm. Length 85cm.

Marlin Thinner n.2. Pack of 0.5lt. Thinners for the following products: MARLIN TF, MARLIN CF, SUPER 505, MARLIN HARD, MAXIMA, UNIVERSAL PRIMER.

Mahogany oar with curved blade, glass lacquered polyurethane, 2.2m, Ø36mm handle.

Single mini-block pulley with becket and cam made of stainless steel, fitted with nylon sheave for ropes up to 6 mm. Sheave Ø25 mm. Breaking load 650 kg.

Quick TINA LED Courtesy Light 0.48W 10~30Vdc IP65 CO20, made with 316 AISI stainless steel mirror polished finish, available in 4 light colours, suitable for ceiling and wall installation.

Quick AUDREY WALL USB 1.5W 10-30V IP40 Polished Aluminum Reading Light with switch and USB charging port, 3800-4100K or 2900-3100K lights, available different colors of the flexible arm, base Ø29x63mm, length 422mm.

TECMA All in One control panel with two buttons. 2 frames (one white and one black). For Tecma electric toilet bowls G1 and G2.

Sail batten terminal 15x3mm

Viadana - Single swivel block - Sheave D.22mm

Watertight Black cap seal for code N51324727156.

Polycarbonate Battery switch. Continuous capacity 140A at 12/24V, Intermittent maximum capacity 2000A. Pull-out key. With watertight rubber cap. QUICK ORIGINAL. Flange D.64 mm.

CHAMPION sparkplug - RS12YC

316 polished stainless steel U-bolt calmp for 11/12 mm cables. M10 Threaded.

Stainless steel hook for shock cord - D.10mm

Spare rowlock for nylon white bimini tops. Made of white nylon. Reference bimini top OS46908xx; OS46909xx; OS46918xx.

Stainless Steel Removable Self-locking pin 6x38mm, fitted with spring balls on one end and ring on the other end.

Bimini top base mount - White colour.

Bimini top fittings. White colour.

Eye terminals - Tube D.20mm - White

Spare cap made of PVC for built-in rod holders. Suitable for N30413004959, N30413004960 and all similar rod holders. Black color.

The latest venting system using solar power. Fitted with mirror polished stainless steel vent diffuser. ON-OFF switch. Equipped with 2 RIGHT/LEFT fans to let air in or out.

Plastic buckle to be fixed - Suitable for belts up to 30 mm - White colour

Tessilmare 2 Meters Track for Radial H30mm Fender Profile.

Extra soft fender cover for Polyform model F2-G5-NF5-HTM2 with rope. Navy blue color. For fenders ±10%: Ø220 mm and length 640 mm.