Best sellers

Kit with Ring with Self-emptying Membrane - External D. 80mm Hole 48mm

90° cockpit drain with check valve. Ø head 87mm. Hose adaptor 51mm. Body made of reinforced acetyl fibre. Head of AISI316 stainless steel and check flap.

White Nylon thru-hull fitting. Hose adaptor 19/20mm.

Europump 18 Self-priming fresh water pump with 4 valves 24V/5,6A 17l/min 2,8Bar

Back vent - Hose adapter 13/20/26mm

Geiser diaphragm self-priming bilge pump 12V 8A. Inlet/outlet 3/4” (mm 19)mm. Flow 18l/min. Head 10m.

Quick WCS830 Windlass control board (UP/DOWN) IP67 front seal, enabling windlass even in the rudder-area, 74.8x74.8mm.

Flush mount Procion LED ceiling light 12/24V 2,6W 215 Lumen. White light colour 3000K. 90° LED beam angle. 12 LEDs. With switch. Ø 86mm.

Powerful completely waterproof IP68 professional LED torch for diving, fishing and pleasurecraft. Complete with armband that allows to fix the torch letting the hands free. Brightness 800 Lumen. Range 200m. Length: 14,5. LED: 1x 10W CREE.

Collar zinc anode for LOMBARDINI engine foot 121xh33mm.

12V 5W bipolar parallel-pole small bulb. BA15D model. 2 pieces pack.

Nylon tarpaulin lacing button black with 4.5mm hole. 10 pack pieces.

Floating buoy red white toggle with regulation through hole for nets, ropes, swimming pools etc, 127x76mm.

San Marco Venice flag in heavy polyester bunting, complete with nylon rope for installation, 20x40cm.

Teak Wonder Instant Cleaner to remove grease stains from small surfaces without the need for abundant rinsing, 250ml.

Spare blade for Oars - D.30mm - Black colour

Heavy duty nylon straight cleat. On-centre spacing D.6x44 mm. Length 175 mm. Black colour.

This is the only PVC fender profile easy and quick to install that can be cold fitted in a few quick steps. Its flexibility and handling make the profile unique. The profile is suitable for H37 mm anodised aluminium support.

Stainless steel hook for windshield fitting - Universal swivel

White ABS automatic solar cell aerator for boats, camper vans, etc., Ø120mm mounting hole, 220xh33mm.

Light stainless steel AISI 316 inclined tee at 90° with rivet hole. For tube D.22 mm.

Light stainless steel AISI 316 tee at 90° with rivet hole. For tube D.25 mm.

Blue Performance BP-3806 hatch covers. Dimensions: 700x700mm. Edge in elastic lycra. Elastic strap for fastening. Material: Nylon Ripstop and stretch Lycra. Grey colour.

International signal code sticker with symbols - 16x24cm

Stamped stainless steel. Length 100 mm. Width 54 mm. Thickness 1,5 mm.

Mirror polished AISI 316 stainless steel Overhang hinges, dimensions 37x37mm, thickness 2 mm.

Hydraulic cylinder gasket kit for UC94-OBF (codes 40154F e 40161M).

T26 Marine Steering Wheel/Helm Ø 350mm with six curved spokes Ø 16mm in mirror-polished stainless steel. Stainless steel hub covered with real leather and lid with wind rose logo in the middle. Soft polyurethane grip. 7° inclination. Grey colour.

Outboard motor stabilising Hydrofoils - From 4 to 50 HP

Plate zinc anode for HONDA 75 - 130 - 225HP engines. Original Reference: 41109ZW1B00, 71x36xh17mm, 220g.

J-PROP Thruster Zinc Anodes for Shaft Ø60xh25mm. Original reference JPROP60. Weight: 0.334 kg.

Hull Optimist " SeaCover" protects your optimist against weather conditions, extending its duration. Dimensions: 220x100 cm.

DIN 964 UNI 6110 A2 Stainless Steel screws blister with flaring rounded head for cross screwdriver. Size 6x35 mm. Packet of 6 pieces.

Stainless steel rivets, diameter 3,9mm, length 16mm. Pack of 10 pieces. A2 DIN 7337 UNI9200A.

Freezer replacement thermostat for cooling units -12°C / -28°C 12/24V, probe length 2m, freezer version Vitrifrigo R10536.

Vitrifrigo C130L Black Refrigerator and Freezer 130lt 12/24Vdc 45W with remote cooling unit,  Airlock system, door in black or gray, version without holding plate evaporator.

Lowrance Elite-7 Ti / Ti² Suncover 000-12749-001.

Raymarine Front Mount Suncover for Axiom 9. Raymarine code A80501.

Traditional oval braided carpet hand-twisted rope of polyester staple bicolor. The quality of the material guarantees the seal of the color and durability. Size: 600x330mm. Blue and white colour.

Loxx-Tenax 10 pieces base plates.
With mounting tool included.

Blister 10p Loxx Tenax M5 10mm metric screws with nut.

Loxx-Tenax 10 pieces self tapping Stainless Steel screws blister.
With mounting tool included. Thread Height 12mm.

Loxx-Tenax 10 pieces self tapping Stainless Steel screws blister.
With mounting tool included. Thread Height 16mm.

Magma 3-leg stand to use on freestanding barbecue