Home
Subcategories
There are 83 products.
Lofrans Control switch for cockpit Type ''L'' 3 positions Up-Off-Down LZ404728
This switch, usually installed on the cockpit, is made by a fixing plaque and by a three position switch (Up-Off-Down).
€20.15
€23.70
Lofrans 12-24V Radio Remote Control LZ312976
Lofrans 12-24V Radio Remote Control. 12-24V. Supports up to 8 independently controlled channels. Zero power consumption when in standby mode.
€318.17
€374.32
Lofrans IRIS II Panel Chain Counter 3-button 12-24V Grey LZ600017
IRIS II Lofrans 12-24V 3-button dashboard meter, suitable for all types of boat cockpits, grey colour, 110x105x15mm.
€323.89
€381.04
Lofrans Down Foot Switch 12-24V Red & Grey 80x95x20mm LZ600011
This device is a switch which works simply by pushing the foot on the button. Stainless Steel base. Down version. 12-24V. Size: 80x95x20mm.
€15.96
€18.78
Lofrans UP Foot Switch 12-24V Black & Grey 80x95x20mm LZ600012
This device is a switch which works simply by pushing the foot on the button. Stainless Steel base. UP version. 12-24V. Size: 80x95x20mm.
€15.96
€18.78
Lofrans THETIS 5003 12-24V Hand Held Remote Control Chaincounter LZ600015
This remote chain counter model THETIS 5003 has been specifically designed to give full control in anchoring. 3 button. 12-24V, 154x59x38mm, 710gr.
€339.57
€399.49
Lofrans HH Remote control THETIS 1002 12-24V N12702122790
THETIS 1002 Lofrans 12-24V HH Remote control with 2 buttons (Up & Down) and spiral cable approximately 4 meters long, 154x59x38mm.
€90.55
€106.53
Lofrans Aluminium Vertical WindlaStainless Steel X1 500W 12V LZ409557
Lofrans Vertical Windlass X1 in anodised marine aluminium anodizzato. Gypsy for 6 mm chain. Gypsy for 10-12 mm ropes. Line speed at W.L. 23m/min. Maximum pull: 630kg. Motor 500W. 12V.
€908.14
€1,068.40
Lofrans Capstan T500 WindlaStainless Steel 500W 12V LZ409563
Lofrans Capstan T500 Windlass. Line speed at W.L. 26m/min. Maximum pull force: 630 kg. Motor 500W. 12V.
€961.55
€1,131.23
Lofrans Dorado Horizontal WindlaStainless Steel 500W 12V LZ409568
Lofrans Dorado Horizontal Windlass. Gypsy for 6 mm chain. Gypsy for 10-12 mm ropes. Recovery speed at load 18m/min. Maximum pull force: 600 kg. Motor 500W.
€961.55
€1,131.23
Lofrans Aluminium Vertical WindlaStainless Steel X2 700W 12V 02122705
Lofrans Vertical Windlass X2 in anodised marine aluminium. Gypsy for 6 mm chain. Line speed at W.L. 26m/min. Maximum pull force: 750kg. Motor 700W.
€1,255.36
€1,476.90
Lofrans Aluminium Vertical WindlaStainless Steel X2 1000W 12V LZ472557
Lofrans Vertical Windlass X2 in anodised marine aluminium anodizzato. Gypsy for 8 mm chain. Gypsy for 14 mm ropes. Line speed at W.L. 20m/min. Maximum pull: 1000 kg. Motor 1000W.
€1,388.94
€1,634.04
Lofrans Dorado Horizontal WindlaStainless Steel 700W 12V LZ600048
Lofrans Dorado Horizontal Windlass. Gypsy for 6 mm chain. Gypsy for 10-12 mm ropes. Line speed at W.L. 20m/min. Maximum pull force: 650 kg. Motor 700W.
€1,041.69
€1,225.51
Lofrans Kobra Horizontal WindlaStainless Steel 1000W 12V LZ600051
Lofrans Kobra Horizontal Windlass. Gypsy for 6 mm chain. Line speed at W.L. 16m/min. Maximum pull force: 1250 kg. Motor 1000W. 12V. With drum.
€1,736.17
€2,042.55
White plastic buckle for straps up to 30mm to be sewn on strap OS0644131
White plastic buckle for straps up to 30mm. Runner to be sewn on strap. Multipurpose: biminis, cushions, strap adjustment, etc.
€2.51
White plastic buckle for straps up to 30mm screw mount OS0644130
White plastic buckle for straps up to 30mm. For hull mounting with screws. Multipurpose: biminis, cushions, strap adjustment, etc.
€2.51
Washer for propeller anode Shaft D.45mm N80605430174
Last items in stock
Washer for propeller anode. Shaft D.45mm.
€10.78
€11.35
Hull anode L130mm W85mm H30mm N80605030263
Hull anode. Length 130mm, Width 85mm, Height 30mm. Weight 1,45kg.
€49.00
€98.00
Plate Zinc anode 45x100mm N80605930293
Plate Zinc anode 45x100mm.
€22.65
€25.17
€30.24
€33.60
Plate Zinc anode for ZF engines N80606230775
Plate Zinc anode for ZF engines.
€37.21
€46.52
Riva NC015 FR-160 Plate Zinc Anode 60x217mm N80605930292
Last items in stock
Riva NC015 FR-160 Plate Zinc Anode, 60x217 mm.
€66.45
€132.91
Dice for shafts M30 N80605430123
Dice for shafts. Thread M30.
€37.26
€41.39
Plate Zinc anode Johnson-Evinrude 225 HP N80607130516
Last items in stock
Plate Zinc anode. Johnson-Evinrude 225 HP.
€52.72
€65.90
Block serie OMC Cobra 130-385 HP N80607130517
Block serie OMC Cobra 130-385 HP. Original Reference 983952. For the measures look at the attached picture.
€39.74
€79.47
Dice for shafts M40 N80605430125
Dice for shafts. Thread M40.
€47.09
€52.33
Dice for shafts M28/30 N80605430124
Dice for shafts. Thread M28/30.
€47.09
€52.33
Fin Zinc anode N80607230728
Fin Zinc anode
€24.50
€30.62
Collar Zinc anode Original Reference 875809-6 N80607230702
Collar Zinc anode. Serie 200. Original Reference 875809-6.
€6.02
€12.04
€55.28
€85.05
Pin Zinc Anode YAMAHA 130-205-230-260HP N80607430629
Pin Zinc Anode YAMAHA 130-205-230-260HP. Yamaha sterndrive (1989-1990). Original reference 6T5-45371-00. For outboard.
€21.86
€43.72
Rod Zinc anode 20x20mm N80607630808
Rod Zinc anode 20x20mm.
€16.02
€17.80
Yanmar Zinc Anode Rod for engine 8x20/30x40mm 6HYM-WET PMX6 PMX8 N80607630811
Yanmar zinc anode rod with stainless steel insert for Yanmar 6HYM-WET engines; PMX6. PMX8 series. Original code: 27200-300400. Size 30x40 mm. 8x20 mm thread. Weight: 0.20 kg.
€20.25
€22.50
Rod Zinc anode 40x40mm N80607630812
Rod Zinc anode. Size 40x40mm.
€18.45
€20.50
Standard frame for CRX 60 fridge FNI2428032
Standard frame for CRX 60 fridge, articles FNI2428002/7.
€77.81
€111.15
Flush Mount frame for CRX 65 fridge FNI2428044
Flush Mount frame for CRX 65 fridge, codes FNI2428002/7.
€117.31
€167.59
Flush Mount frame for CRX 50 fridge FNI2428043
Flush Mount frame for CRX 50 fridge, articles FNI2428001/6.
€117.35
€167.64
Standard frame for CRX 80 fridge FNI2428033
Standard frame for CRX 80 fridge, article FNI2428008.
€77.71
€111.02
Flush Mount frame for CRX 80 fridge FNI2428045
Flush Mount frame for CRX 80 fridge for articles FNI2428008.
€146.96
€209.94
Dometic central vacuum cleaner 220V 950W OS5085101
Dometic central vacuum cleaner 220V 950W. It can be flush mounted into the bulkhead. Suction power: 2500 mm (H2O column). The system includes: 12-m suction hose, brushes and crevice tool. Efficient and hypoallergenic triple filter.
€538.68
€804.00
Barton Marine Winch Speed 8-1 FNI7821200
Suitable for boats up to 10mt, ideal for sheets and halyards in natural and artificial fibre. Speed: 8.1; Base Ø 101,6mm; Drum Ø 66,7mm; Height 101mm; Weight 0,835 kg.
€364.40
€520.57
Barton Marine Winch Speed 23-1 FNI7821202
Twin speed model 23:1. Suitable for boats up to 10mt, ideal for sheets and halyards in natural and synthetic materials. Base Ø 114,3 mm ; Drum Ø 66,7 mm ; Height 135 mm ; Weight 1,6 kg.
€602.64
€860.92
Barton Marine Winch Speed 16-1 FNI7821201
Suitable for boats up to 10mt, ideal for sheets and halyards in natural and synthetic materials. Speed: 16.1 ; Base Ø 114,3mm; Drum Ø 66,7mm; Height 135mm; weight 1,264 kg.
€455.26
€650.37
Pair Winchers Winch 70/80mm FNI7821642
A specially designed rubber moulding which fits over the top of standard winches, converting them to self-tailing. Sold in pairs. Wincher Ø 70-80mm. Rope Ø 10-14mm.
€130.24
€186.06