Bilge pumps and accessories
Subcategories
Immersion bilge pumps
Immersion bilge pumps
Self-priming bilge pumps
Self-priming bilge pumps
Manual bilge pumps
Manual bilge pumps
Floating switches and accessories
Floating switches and accessories
There are 42 products.
Maxvell 40A Thermal cut-out switch MT1206014
40A Thermal cut-out switch for protection of the main windlass circuit. Enables the battery to be isolated when the winch is not in use.
€159.58
€199.47
ON-OFF Push/pull switch N50424727108
Push-Pull Switch 20 Amp. Hole Ø 9,5mm. Shaft length 30mm.
€14.76
€16.40
Cap for 2-pin ON-OFF Toggle switch N51324727001
Rubber Cap for 2-pin ON-OFF Toggle switch, code N51324727000.
€2.55
€2.68
ON-OFF Toggle switch 2 pins N51324727000
ON-OFF Toggle switch with chrome-plated lever. 12/24V. 3A. Recess 15x25mm. Depth 10mm. 2 lateral pins. D.10 mm.
€4.43
€4.66
ON-OFF Toggle switch with rubber hood N51324727020
ON-OFF Toggle switch with chrome-plated lever with rubber hood. Capacity 10A. 12/24V. 3 pins.
€8.76
€9.22
Push-pull switch in chrome-plated brass with long pin Max load 10A N51324727105
Push-pull switch in chrome-plated brass, silver plated contacts, long pin. Max load 10A. For bulkhead thickness 20 mm. Maximum functionality.
€7.97
€8.39
Watertight Brass horn switch 12V 20A 2 poles N51324727153
Watertight horn switch. Manufactured in brass. Operating with 12V. 2 poles model. Rubber cap. Thread Ø 16mm. Panel thickness 20mm. Capacity 20A.
€19.15
€21.28
Off-On Push-button switch 2 terminals 15A N51324727156
Superior quality antistatic Resin body push-button switch. Silver contacts and moisture proof button. Can be completed with watertight Red or Black cap seal. 2 terminals. 15A capacity. Positions Off-On.
€13.79
€14.52
Push button for electric horn with short neck 2 pins 10A 12/24V N51324727155
Push button for electric horn with short neck, 2 pins. 10A. 12/24V. Thread ø 22mm.
€3.13
€3.29
Watertight Redcap seal for code N51324727156 N51324727158
Watertight Red cap seal for code N51324727156.
€3.25
€3.42
Watertight Black cap seal for code N51324727156 N51324727157
Watertight Black cap seal for code N51324727156.
€3.25
€3.42
Marco IMP2 NBR Rubber impeller for UP1-J Self-priming electric pump N40352014240
Marco IMP2 NBR Rubber impeller for UP1-J 12V and 24V Self-priming electric pumps, Ø40,5xh22mm, bore Ø8mm, Marco 16300100.
€15.37
€17.08
Bilge pump Switch & Alarm panel to control N50423701123
Switch panel to control bilge pumps. With switch for manual or automatic use of bilge pumps. Dimension 90x50 mm.
€27.34
€30.38
Marco IMP1 NBR Rubber impeller for UP1 UP1-M UP1/AC Self-priming pumps N40352014241
Marco IMP1 NBR Rubber impeller for Marco UP1, UP1-M and UP1/AC Self-priming electric pumps, Ø51,5xh22mm, bore Ø8mm, Marco 16300000.
€25.36
€28.18
Marco UP3700 24V 6A Submersible Bilge Pump 230l/min Lift 5m MC16018013
UP3700 24V 6A Submersible Bilge Pump 230l/min for bilge emptying with ABS material housing, corrosion resistant, size Ø110x202mm, lift 5m, Marco 160 180 13.
€179.34
€256.20
Marco UP500 12V 2.5A Submersible Bilge Pump 32l/min Lift 4m N44438522490
UP500 12V 2.5A Submersible Bilge Pump 32l/min for bilge emptying with ABS material housing, corrosion resistant, size Ø59x94.5mm, lift 4m, Marco 160 100 12.
€36.67
€40.75
Caravel immersion electric pump 12V Flow 8,5 l/min 3mt N44438501053
Caravel immersion electric pump suitable for water tanks and tanks. Prevalence 3mt. ø 36mm. 12V. Flow 8,5 l/min.
€21.35
€23.72
Marco UP2000 12V 12A Submersible Bilge Pump 126l/min Lift 4m N44438522496
UP2000 12V 12A Submersible Bilge Pump 126l/min for bilge emptying with ABS material housing, corrosion resistant, size Ø96x200mm, lift 4m, Marco 160 160 12.
€122.98
€136.64
Marco UP1500 12V 10A Submersible Bilge Pump 95l/min Lift 4m N44438522494
UP1500 12V 10A Submersible Bilge Pump 95l/min for bilge emptying with ABS material housing, corrosion resistant, size Ø96x160mm, lift 4m, Marco 160 140 12.
€88.94
€98.82
Marco UP1000 12V 4A Submersible Bilge Pump 63l/min Lift 4m N44438522492
UP1000 12V 4A Submersible Bilge Pump 63l/min for bilge emptying with ABS material housing, corrosion resistant, size Ø78x124.5mm, lift 4m, Marco 160 120 12.
€56.00
€62.22
Marco UP1-B 12V 14A Ballast pump with rubber impeller 45l/min MC16200312
UP1-B 12V 14A Self-priming electric water pump 45l/min with selflubricating flexible impeller for prolonged service life and better performance, self-priming 1.5m. Marco 16200312.
€162.26
€231.80
Marco UP1 24V 5A Bilge Pump Capacity 35l/min 1.2bar MC16200213
UP1 24V 5A Self-priming electric water pump with rubber impeller 35 liters/minute, self-priming 1.5m, IP67, 180W motor power. Marco 162 002 13.
€152.01
€217.16
Marco UP1/AC 220V 50Hz 3.3A Pump rubber impeller 30l/min MC1620011C
UP1/AC 220V 50Hz 3.3A Self-priming electric pump for transfer of fresh or salt water with flexible impeller of nitrile rubber, self-priming 1.5m. Marco 1620011C.
€339.89
€485.56
Marco UP1-B 24V 7A Ballast pump with rubber impeller 45l/min MC16200313
UP1-B 24V 7A Self-priming electric water pump 45l/min with selflubricating flexible impeller for prolonged service life and better performance, self-priming 1.5m. Marco 16200313.
€162.26
€231.80
Marco UP1-M 24V 7A Self-priming electric pump 45l/min with rubber impeller MC16200613
UP1-M 24V 7A Self-priming electric pump 45l/min with rubber impeller for bilge and waste water on any type of boat, self-priming 1.5m. Marco 16200613.
€184.46
€263.52
Marco UP1-M 12V 14A Self-priming electric pump 45l/min with rubber impeller MC16200612
UP1-M 12V 14A Self-priming electric pump 45l/min with rubber impeller for bilge and waste water on any type of boat, self-priming 1.5m. Marco 16200612.
€184.46
€263.52
Marco UP1-JS 24V 4A Impeller pump 28l/min with integrated ON OFF Switch MC16201013
UP1-JS 24V 4A Professional self-priming electric pump 28l/min for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated, self-priming 1.5m. Marco 16201013.
€164.70
€183.00
Marco UP1-JS 12V 8A Impeller pump 28l/min with integrated ON OFF Switch MC16201012
UP1-JS 12V 8A Professional self-priming electric pump 28l/min for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated, self-priming 1.5m. Marco 16201012.
€164.70
€183.00
Seawater strainer in polycarbonate L125xh115mm Pots Ø16mm MT4132216
Seawater strainer in polycarbonate for pumps and engine cooling. L125xh115mm Pots Ø16(5/8")mm
€32.83
€36.48
Marco UP1-JR 24V 4A Reversible impeller pump 28l/min with ON OFF Switch MC16201113
UP1-JR 24V 4A Self-priming electric pump 28l/min for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap, self-priming 1.5m. Marco 16201113.
€129.81
€185.44
Marco UP1-JR 12V 8A Reversible impeller pump 28l/min with ON OFF Switch MC16201112
UP1-JR 12V 8A Self-priming electric pump 28l/min for the refueling and transfer of water, oil and diesel with ON/OFF switch integrated into the water-proof cap, self-priming 1.5m. Marco 16201112.
€166.90
€185.44
Seawater strainer in polycarbonate L125xh115mm Pots Ø19mm MT4132219
Seawater strainer in polycarbonate for pumps and engine cooling. L125xh115mm Pots Ø19(3/4")mm
€32.83
€36.48
Marco UP1-J 12V 8A Bilge Pump with rubber impeller 28l/min 1bar N40338522938
UP1-J 12V 8A Self-priming electric pump with rubber impeller 28 liters/minute, ISO 8849 and ISO 8846, self-priming 1.5m, IP67, 150W motor power. Marco 16200412.
€142.74
€158.60
Marco UP1 12V 10A Self-priming Water pump with rubber impeller 35l/min N40338522940
UP1 12V 10A Self-priming electric water pump with rubber impeller 35 liters/minute, self-priming 1.5m, 1.2 bar, IP67, 180W motor power. Marco 162 002 12.
€152.01
€217.16
Manual Bilge Pump Capacity 50Lt/min N40238522901
Manual Bilge Pump suitable for any type of boat. Capacity 50Lt/min.
€45.41
€50.46
Nautiline manual pump 45Lt/min Ø35mm 180x120x75mm N40238522900
Nautiline manual pump. Suitable for any type of boat. Capacity 45Lt/min Ø35mm, 180x120x75mm, 0.57kg.
€28.24
€31.38
Manual bilge pump 35cm TRP0250035
Manual bilge pump. Simple control of the liquid to be bailed. Supplied with terminal extension and spiral drainage hose. Length L.35cm
€16.12
€17.91
Manual bilge pump 100cm TRP0250100
Manual bilge pump. Simple control of the liquid to be bailed. Supplied with terminal extension and spiral drainage hose. Length 100 cm.
€28.37
€31.52
Manual bilge pump 55cm TRP0250055
Manual bilge pump. Simple control of the liquid to be bailed. Supplied with terminal extension and spiral drainage hose. Length L.55cm
€19.02
€21.13
Marco AS3 12-24V Automatic float switch for bilge pump N40338501036
AS3 automatic float switch for bilge pump 12-24V, maximum electric input 14A, 127x42x110mm, cable section 90cm, 19-51mm Off-On. Marco 161 002 20.
€34.48
€38.31
Marco UP2000 24V 6A Submersible Bilge Pump 126l/min Lift 4m N44438522497
Marco UP2000 24V 6A Submersible Bilge Pump 126l/min for bilge emptying with ABS material housing, corrosion resistant, size Ø96x200mm, lift 4m, Marco 160 160 24.
€125.31
€179.01
Rubber cap for electrical panels TRL0661006
Rubber cap for electrical panels.
€1.78
€1.88