Anchorage and Mooring
Subcategories
Oars and accessories
Wide assortment of oars, boat hooks (boat hooks), paddles, oarlocks, hooks and clip clips and various uses
Bow rollers and accessories
Bow rollers and accessories
Windlasses and accessories
Windlasses and accessories
Anchors shackles and accessories
Anchors shackles and accessories
Fairleads and hawsehole
Fairleads and hawsehole
Cleats and protection plates
Cleats and protection plates
Mooring springs and shock absorbers
Mooring springs and shock absorbers
Chain swiveling joint and accessories
Chain swiveling joint and accessories
Ropes and accessories
Ropes and accessories
Fenders and accessories
Fenders and accessories
Bumpers and fender profiles
Bumpers and fender profiles
Bumpers for docks and piers
Bumpers for docks and piers
Buoys and floats
Buoys and floats
There are 371 products.
Orange Pear-shaped mooring buoy 250xh390mm Buoyancy 10kg N10502904260
Reinforced Plastic pear-shaped mooring buoy. Diameter 250mm. Height 390mm. Buoyancy 10kg. Orange colour.
€11.47
€12.08
Life buoy bracket N92455804172
Life buoy light bracket in stainless steel with nylon clips.
€9.50
€10.00
Floating life buoy light 350x120mm N92455804191
Floating life buoy light. Dan buoy "STAR 1", fitted with automatic overturning switch-on.
€21.41
€23.79
StainleStainless Steel steel swivel Eye-shackle 12mm pin MT0121913
Stainless steel swivel. Eye-shackle. 12mm pin. Thickness 12mm. Length 150mm.
€35.79
€39.77
Mooring Device and Anchor/Chain Gripper for 6/8mm Chain N12401502907
Mooring Device and Anchor/Chain Gripper for 6/8mm Chain
€19.54
€21.72
Mooring Device and Anchor/Chain Gripper for Chain 10/12mm N12401502908
Mooring Device and Anchor/Chain Gripper for Chain 10/12mm
€51.06
€56.73
StainleStainless Steel steel spinning wheel - Eye-fork - Pin 6 mm N12401802671
Stainless steel spinning wheel. Eye-fork. Pin D.6mm. Thickness 6mm. Lenght 65mm.
€4.52
€4.76
StainleStainless Steel steel spinning wheel - Eye-fork - Pin 5 mm N12401802670
Stainless steel spinning wheel. Eye-fork. Pin D.5mm. Thickness 5mm. Lenght 60mm.
€3.13
€3.29
StainleStainless Steel steel spinning wheel - Eye-eye - Pin 5 mm N12401802680
Stainless steel spinning wheel. Eye-eye. Pin D.5mm. Thickness 5mm. Lenght 60mm.
€2.44
Double Swivel Roll Connector Chain 10mm N12401810068
Stainless steel double swivel connector for anchors and chains. Serves to connect chain to the anchor sliding smoothly over anchor rollers, preventing the chain from snagging. 10 mm chain.
€64.42
€80.52
Roll connector w/double joint for Chain 6/8mm N12401810067
Stainless steel roll connector with double joint for anchor and chain. It is impossible for the chain to get twisted. 6/8 mm chain. Total lenght: 117 mm.
€32.83
€36.48
TrimFix StainleStainless Steel Steel long swivel connector for Ø6/8mm chains N12401828977
TrimFix Stainless Steel long swivel connector for Ø6/8 mm chains. It runs in the bow anchor without stalling, prevents chain tangling.
€64.90
€81.13
Magnet Kit to insert into the Winch Chain Pulley MT1205505
Magnet kit to insert into the winch chain pulley. In case the windlass is not equipped with this accessory.
€50.40
€56.00
Hall anchor in Hot Galvanised Steel 8kg MT0104508
Hall Anchor made of hot galvanised steel; classic and sturdy anchors. Suitable for all type of seabeds; fitted with swivelling arm with a wide angle. Length 495mm. Width 230mm. 8kg.
€76.81
€96.01
Hall anchor in Galvanised StainleStainless Steel Steel 2.8kg N10701710010
Hall type anchor in galvanised stainless steel, fluke angle, classic style and sturdy. Suitable for all types of seabeds. Weight 2,8 kg.
€25.80
€28.67
Hall anchor in Hot Galvanised Steel 6kg N10701710012
Hall Anchor made of hot galvanised steel for all type of seabeds, 385x205mm, 6kg.
€60.39
€67.10
Hall anchor in Hot Galvanised Steel 37kg N10701710011
Hall Anchor in hot galvanised steel; classic and sturdy anchors suitable for all type of seabeds; fitted with swivelling arm with strong angle. 3,7kg. Length 325mm. Width185mm.
€43.92
€48.80
Hall anchor in Hot Galvanised Steel 10 kg N10701710014
Hall Anchor made of hot galvanised steel; classic and sturdy anchors suitable for all type of seabeds; fitted with swivelling arm with a wide angle. 10kg. Length 495mm. Width 245mm.
€94.57
€118.22
Hot Galvanised steel Grapnel Anchor 32 kg N10701710002
Hot galvanised cast steel version. Counterweight bar fitted to the shank to improve anchor balance. Size: length 420 mm, open diameter 365 mm, closed diameter 100 mm, 3.2kg.
€34.59
€38.43
Hot Galvanized steel Grapnel Anchor 25 kg N10701710001
Hot galvanized cast steel version. Counterweight bar fitted to the shank to improve anchor balance (Norwegian SAV system). Dimensions: 360x330x85mm. 2.5 kg.
€27.34
€30.38
Hot Galvanised Steel Grapnel Anchor 6 kg N10701710004
Hot galvanised cast steel version. Counterweight bar fitted to the shank to improve anchor balance (Norwegian SAV system). 6Kg.
€64.23
€71.37
Hot Galvanised steel Grapnel Anchor 4 kg N10701710003
Hot galvanised cast steel version. Counterweight bar fitted to the shank to improve anchor balance (Norwegian SAV system). 4Kg.
€43.37
€48.19
Hot Galvanised Steel Grapnel Anchor 8 kg N10701710005
Hot galvanised cast steel version. Counterweight bar fitted to the shank to improve anchor balance (Norwegian SAV system). 8 Kg.
€76.62
€95.77
Rocna Galvanised Steel Anchor 10kg 724x365mm for boats 11m MT0101010
Rocna anchor made of galvanized steel 10kg for boats under 11 meters in length, 724x365mm, fluke area 795cmq, recommended chain 7mm. It adapts to any seabed, from soft and muddy ones to more rigid, clayey or algic ones.
€532.53
€591.70
Rocna Galvanised Steel Anchor 6Kg 630x315mm for boats 8m MT0101006
Rocna anchor made of galvanized steel 6kg for boats under 8 meters in length, 630x315mm, fluke area 590cmq, recommended chain 6mm. It adapts to any seabed, from soft and muddy ones to more rigid, clayey or algic ones.
€386.50
€429.44
Rocna Anchor in Galvanised Steel 4kg L.547mm x W.275mm MT0101004
Galvanised Steel Rocna 4kg Anchor. Length 547mm, width 275mm. For boats <6 m.
€289.87
€322.08
Rocna Galvanised Steel Anchor 20kg 864x435mm for boats 14m MT0101020
Rocna anchor made of galvanized steel 20kg for boats under 14 meters in length, 864x435mm, fluke area 1140cmq, recommended chain 9mm. It adapts to any seabed, from soft and muddy ones to more rigid, clayey or algic ones.
€876.75
€974.17
Rocna Galvanised Steel Anchor 15kg 830x415mm for boats 12m MT0101015
Rocna anchor made of galvanized steel 15kg for boats under 12 meters in length, 830x415mm, fluke area 1130cmq, recommended chain 8mm. It adapts to any seabed, from soft and muddy ones to more rigid, clayey or algic ones.
€692.84
€769.82
Rocna Galvanised Steel Anchor 55kg 1235x620mm for boats 26m MT0101055
Rocna anchor made of galvanized steel 55kg for boats under 26 meters in length, 1235x620mm, fluke area 2300cmq, recommended chain 12mm. It adapts to any seabed, from soft and muddy ones to more rigid, clayey or algic ones.
€3,228.12
€3,586.80
Rocna Galvanised Steel Anchor 40kg 1142x570mm for boats 22m MT0101040
Rocna anchor made of galvanized steel 40kg for boats under 22 meters in length, 1142x570mm, fluke area 1945cmq, recommended chain 11mm. It adapts to any seabed, from soft and muddy ones to more rigid, clayey or algic ones.
€2,212.47
€2,458.30
Rocna Galvanised Steel Anchor 33kg 1066x532mm for boats 20m MT0101033
Rocna anchor made of galvanized steel 33kg for boats under 20 meters in length, 1066x532mm, fluke area 1695cmq, recommended chain 10mm. It adapts to any seabed, from soft and muddy ones to more rigid, clayey or algic ones.
€1,565.75
€1,739.72
Rocna Galvanised Steel Anchor 25kg 971x485mm for boats 16m MT0101025
Rocna anchor made of galvanized steel 25kg for boats under 16 meters in length, 971x485mm, fluke area 1415cmq, recommended chain 10mm. It adapts to any seabed, from soft and muddy ones to more rigid, clayey or algic ones.
€1,138.63
€1,265.14
S60 Spade Anchor Galvanized steel 95Kg - 695x250mm MT0109110
S60 Spade Anchor Galvanized steel 9,5Kg - 695x250mm
€585.84
€836.92
Rocna Galvanised Steel Anchor 70kg 1338x670mm for boats 30m MT0101070
Rocna anchor made of galvanized steel 70kg for boats under 30 meters in length, 1338x670mm, fluke area 2690cmq, recommended chain 14mm. It adapts to any seabed, from soft and muddy ones to more rigid, clayey or algic ones.
€4,389.80
€4,877.56
S100 Spade Anchor Galvanized Steel 20Kg - 880x330mm MT0109120
S100 Spade Anchor Galvanized Steel 20Kg - 880x330mm
€1,006.01
€1,437.16
S80 Spade Anchor Galvanized steel 15Kg - 770x285mm MT0109115
S80 Spade Anchor Galvanized steel 15Kg - 770x285mm
€847.17
€1,210.24
S140 Spade Anchor Galvanized steel 30Kg - 1050x370mm MT0109130
S140 Spade Anchor Galvanized steel 30Kg - 1050x370mm
€1,585.02
€2,264.32
S120 Spade Anchor Galvanized Steel 25Kg - 960x380mm MT0109125
Galvanized Steel Spade Anchor S120 25Kg - 960x380mm
€1,345.90
€1,922.72
S180 Spade Anchor Galvanized Steel 45Kg - 1180x425mm MT0109145
S180 Spade Anchor Galvanized Steel 45Kg - 1180x425mm
€2,307.51
€3,296.44
S160 Spade Anchor Galvanized steel 35Kg - 1120x420mm MT0109135
S160 Spade Anchor Galvanized steel 35Kg - 1120x420mm
€1,860.01
€2,657.16
DANFORTH Anchor in Hot-galvanised Steel 8kg N10701710022
Hot-galvanised Steel DANFORTH Anchor, 695x540x370mm, 8kg.
€54.13
€60.15
DANFORTH Anchor in Hot-galvanized Steel 6 Kg N10701710021
Hot-galvanized Steel DANFORTH Anchor. Dimensions: A= 640mm, B= 465mm, C= 320mm. 6kg.
€41.18
€45.75
DANFORTH Anchor in Hot-galvanized Steel 4 Kg N10701710020
Hot-galvanized Steel DANFORTH Anchor. Dimensions: A= 525mm, B= 430mm, C= 270mm. 4kg.
€32.94
€36.60
DANFORTH Anchor in Hot-galvanized Steel 20 Kg N10701710026
Hot-galvanized Steel DANFORTH Anchor. Dimensions: A= 970mm, B= 750mm, C= 570mm. 20kg.
€143.96
€179.95