Home
Subcategories
There are 71 products.
Repair Set for PVC Inflatable Boats 500gr N705477COL706
Repair Set for PVC Inflatable Boats. Set made by 500gr Two-component polychloroprene-based adhesive and 30ml Activator for Adeco Glue.
€30.85
€32.48
Kit Fire Extinguisher 6kg HFC227 FNI1213236H
Same as art. 1213236, but with HFC227 known also as FM200, that is a gas ozone friendly, it does not damage the engine, no tailings left, no dirt and is not harmful to people. 6Kg.
€976.98
€1,395.68
Automatic Fire Extinguisher Kit 6Kg FNI1213236
Fire Extinguisher for inboard motor boats. Provided with a pressurized tank with powder ABC, Rina approved, ISO 9094.
€348.56
€497.94
Automatic Fire Extinguisher Kit 12Kg FNI1213242
Fire extinguisher for inboard motor boats. Provided with a pressurised tank with ABC dry powder, Rina approved, ISO 9094.
€394.62
€563.74
Forespar Sta-Plug form fitting emergency plug N91556205710
Sta-Plug is Forespar’s new form fitting emergency plug. A soft cone shaped design allows it to easily fill the irregular shapes of hull impact breaches, as well as any round hole leak from a hose or through-hull.
€43.92
Lifting Sling 180mm 10mt FNI808920
White high tenacity lifting sling, with reinforced eye on the two ends. CEN standard type, safety coefficient = 7:1. Size: 180mm x 10mt.
€251.08
€358.68
Lifting Sling 150mm 12mt FNI808912
White high tenacity lifting sling, with reinforced eye on the two ends. CEN standard type, safety coefficient = 7:1. Misura: 150mm x 12mt.
€180.36
€257.66
Lifting Sling 100mm 10mt FNI808911
White high tenacity lifting sling, with reinforced eye on the two ends. CEN standard type, safety coefficient = 7:1. Size: 100mm x 10mt.
€102.48
€146.40
Lifting Sling 150mm 10mt FNI808910
White high tenacity lifting sling, with reinforced eye on the two ends. CEN standard type, safety coefficient = 7:1. Size: 150mm x 10mt.
€156.37
€223.38
Genoese type beech oar Length 3mt FNI909730
Genoese type beech oar. Length 3mt. Dimensions: A= 125cm, B= 81cm, C= 80cm, D= 16cm.
€253.05
€361.50
Genoese type beech oar Length 275mt FNI909727
Genoese type beech oar. Length 2,75mt. Dimensions: A= 113cm, B= 78cm, C= 67cm, D= 13cm.
€228.46
€326.37
Genoese type beech oar Length 250 mt FNI909725
Genoese type beech oar. Length 2,50 mt. Dimensions: A= 103cm, B= 75cm, C= 60cm, D= 12cm.
€193.69
€276.70
Pair of Black Fender Holder Ø 32mm Rope Ø 6-10mm FNI1515332N
Fender holder “Fastfender” Double clips in nylon PAG, to secure, remove and adjust easily and quickly with just one hand fenders. Pack 2 pcs. Black.
€25.59
€31.99
Fastfender Piars of Fender holder tube Ø 40m Rope Ø 6-14mm Blue N10502805003BL
Fastfender Fender holder. Rope Ø 6-14mm, Fixing support: tube Ø 40mm, Tensile strength 150kg. Size: 160X76X47mm. Pack 2 pcs. Blue colour.
€29.04
€38.72
Blue Couple attach fenders Fastfender Sail for Lifelines 8mm N10502805000BL
The Fastfender Sail is designed for securing fenders on steel wire railings up to Ø 8mm. Thickness rope 6 to 12mm. Blue colour.
€13.41
€14.90
Elastic mooring system Ø 18-20 mm OS0115504
Elastic mooring system Ø 18-20 mm
€34.87
Unimer U-cleat mooring compensator 520 mm OS0149513
Unimer U-cleat mooring compensator 520 mm
€80.01
€97.58
Unimer U-cleat mooring compensator 416 mm OS0149512
Unimer U-cleat mooring compensator 416 mm
€56.50
€68.91
Unimer U-cleat mooring compensator 332 mm OS0149511
Unimer U-cleat mooring compensator 332 mm
€46.42
€56.61
ClaStainless Steelic shock absorber 255 mm OS0149603
Classic shock absorber 255 mm
€19.07
€23.25
ClaStainless Steelic shock absorber 210 mm OS0149602
Classic shock absorber 210 mm
€14.75
€17.98
ClaStainless Steelic shock absorber 159 mm OS0149601
Classic shock absorber 159 mm
€8.36
€10.20
Stainless Steel AISI 316 Inspection Hatch Cover Ø110/146mm FNI3333216
Stainless Steel AISI 316 inspection hatch cover Ø110/146mm.
€98.15
€140.21
PVC cowl Vent Base Ø100mm H125mm N30311602491
PVC cowl vent, with deck ring and cover. Base Ø100mm H125mm.
€26.21
€32.76
Stainless Steel coupling for transom ladders for Tube D. 22-25mm FNI2930007
Stainless Steel coupling for transom ladder. Length 140mm. For tube with diameter of 22-25 mm.
€12.81
€13.48
Stainless Steel Stanchion Ø 25X625mm N40710302025
Stainless Steel Stanchion, Ø 25mm, upper and central hole Ø 10mm.
€28.70
€35.88
AISI 316 Folding ladder Tube Ø 25mm 4 anti-slip Steps FNI3030104
AISI 316 Folding Boarding ladder. Tube Ø 25mm, black anti-slip plastic oval steps. Length 1040mm, width 270mm.
€173.06
€247.23
White nylon rod holder Ø 38mm N30413004953
White nylon rod holder for ceiling or bulkhead mounting. Ø 38mm.
€2.77
€2.92
Blue Performance 4 Measure Hatch Covers 500x500mm N30011105223
Blue Performance 4 Measure Hatch Covers with elastic strap for fastening, 500x500mm.
€63.77
BP-851 Blue performance hatch covers mosquito 450x450mm N30011105240
BP-851 Blue performance hatch covers mosquito 450x450mm
€85.03
BP-3806 Blue Performance hatch covers 700x700mm N30011105225
Blue Performance BP-3806 hatch covers. Dimensions: 700x700mm. Edge in elastic lycra. Elastic strap for fastening. Material: Nylon Ripstop and stretch Lycra. Grey colour.
€84.19
BP-853 Blue performance hatch covers mosquito 580x580mm N30011105242
BP-853 Blue performance hatch covers mosquito 580x580mm
€107.88
BP-855 Blue performance hatch covers mosquito 770x770mm TFBP855
BP-855 Blue performance hatch covers mosquito 770x770mm
€118.10
BP-856 Blue performance hatch covers mosquito 860x860mm TFBP856
BP-856 Blue performance hatch covers mosquito 860x860mm
€142.40
Chrome-plated Double lever control box FNI4241005
Chrome-plated brass double lever control box, throttle + gearbox for one engine. Uses cables C2 - C7 - C8 - Mach Zero - C22 - 33C. Dimensions: A= 75, B= 165, C= 137, D= 95, E= 130, F= 110 mm.
€199.70
€285.28
Mahogany Marine Steering Wheel/Helm Ø 370mm FNI4345037
Traditional mahogany marine wheel Ø 370mm with six spokes. Bronze hub and ring. Varnished with glossy transparent polyurethane paint, universal cone.
€122.38
€174.83
Mahogany Marine Steering Wheel/Helm Ø 420mm FNI4345042
Traditional mahogany marine wheel Ø 420mm twith six spokes. Bronze hub and ring. Varnished with glossy transparent polyurethane paint, universal cone.
€131.21
€187.44
Mahogany Marine Steering Wheel/Helm Ø 490mm FNI4345049
Traditional mahogany marine wheel Ø 490mm with six spokes. Bronze hub and ring. Varnished with glossy transparent polyurethane paint, universal cone.
€149.69
€213.84
Mahogany Marine Steering Wheel/Helm Ø 520mm FNI4345052
Traditional mahogany marine wheel Ø 520mm with six spokes. Bronze hub and ring. Varnished with glossy transparent polyurethane paint, universal cone.
€172.23
€246.05
Mahogany Marine Steering Wheel/Helm Ø 540mm FNI4345058
Traditional mahogany marine wheel Ø 540mm with six spokes with stainless steel rim. Chrome plated brass hub and ring, with universale cone.
€277.53
€396.48
Teak Marine Steering Wheel/Helm Ø 400mm FNI4345140
Steering Wheel/Helm Ø 400mm with Teak rim and stainless steel hub and spokes, 115mm protrusion, universal cone.
€165.71
€236.73
Teak Steering Wheel/Helm Ø 350mm FNI4345135
Steering Wheel/Helm Ø 350mm with Teak rim and stainless steel hub and spokes, 115mm protrusion, universal cone.
€130.11
€185.87
Teak Marine Steering Wheel/Helm Ø 400mm FNI4345240
Teak Marine Steering Wheel/Helm Ø 400mm with teak grip and rim, 65mm protrusion, universal cone.
€200.61
€286.59
Teak Marine Steering Wheel/Helm Ø 500mm FNI4345250
Teak Marine Steering Wheel/Helm Ø 500mm with teak grip and rim, 65mm protrusion, universal cone.
€250.33
€357.62