Home
Subcategories
There are 55 products.
Washer for propeller anode Shaft D.45mm N80605430174
Last items in stock
Washer for propeller anode. Shaft D.45mm.
€10.78
€11.35
Hull anode L130mm W85mm H30mm N80605030263
Hull anode. Length 130mm, Width 85mm, Height 30mm. Weight 1,45kg.
€49.00
€98.00
Plate Zinc anode 45x100mm N80605930293
Plate Zinc anode 45x100mm.
€22.65
€25.17
€30.24
€33.60
Plate Zinc anode for ZF engines N80606230775
Plate Zinc anode for ZF engines.
€37.21
€46.52
Riva NC015 FR-160 Plate Zinc Anode 60x217mm N80605930292
Last items in stock
Riva NC015 FR-160 Plate Zinc Anode, 60x217 mm.
€66.45
€132.91
Dice for shafts M30 N80605430123
Dice for shafts. Thread M30.
€37.26
€41.39
Plate Zinc anode Johnson-Evinrude 225 HP N80607130516
Last items in stock
Plate Zinc anode. Johnson-Evinrude 225 HP.
€52.72
€65.90
Block serie OMC Cobra 130-385 HP N80607130517
Block serie OMC Cobra 130-385 HP. Original Reference 983952. For the measures look at the attached picture.
€39.74
€79.47
Dice for shafts M40 N80605430125
Dice for shafts. Thread M40.
€47.09
€52.33
Dice for shafts M28/30 N80605430124
Dice for shafts. Thread M28/30.
€47.09
€52.33
Fin Zinc anode N80607230728
Fin Zinc anode
€24.50
€30.62
Collar Zinc anode Original Reference 875809-6 N80607230702
Collar Zinc anode. Serie 200. Original Reference 875809-6.
€6.02
€12.04
€55.28
€85.05
Pin Zinc Anode YAMAHA 130-205-230-260HP N80607430629
Pin Zinc Anode YAMAHA 130-205-230-260HP. Yamaha sterndrive (1989-1990). Original reference 6T5-45371-00. For outboard.
€21.86
€43.72
Rod Zinc anode 20x20mm N80607630808
Rod Zinc anode 20x20mm.
€16.02
€17.80
Yanmar Zinc Anode Rod for engine 8x20/30x40mm 6HYM-WET PMX6 PMX8 N80607630811
Yanmar zinc anode rod with stainless steel insert for Yanmar 6HYM-WET engines; PMX6. PMX8 series. Original code: 27200-300400. Size 30x40 mm. 8x20 mm thread. Weight: 0.20 kg.
€20.25
€22.50
Rod Zinc anode 40x40mm N80607630812
Rod Zinc anode. Size 40x40mm.
€18.45
€20.50
Hot Water Hose 19mm 3/4 inches Sold by meter N43936112072
Softwall rubber hot water hose suitable for hot water and non corrosive fluids and steam mix up to 120° C. Sold by the metre. Inner D.19 mm - 3/4".
€8.80
Hot Water Hose 16mm 5/8 inches Sold by meter N43936112071
Softwall rubber hot water hose suitable for hot water and non corrosive fluids and steam mix up to 120° C. Sold by the metre. Inner D.16 mm - 5/8".
€7.70
Hot Water Hose 13mm 1/2 inches Sold by meter N43936112070
Softwall rubber hot water hose suitable for hot water and non corrosive fluids and steam mix up to 120° C. Sold by the metre. Inner D.13 mm - 1/2".
€6.90
Water hose 13x18mm 1/2 inches Sold by meter N43936112082
Made of flexible PVC, non-toxic, fitted with reinforced polyester thread; ideal for water distribution or for bilge pumps.
€1.90
PVC Water Hose 19x25mm 3/4 inches Sold by meter N43936112084
Water hose made of netted non toxic Pvc suitable for delivery of drinking water and alimentary liquids. Sold by the metre. Inner D.19 mm - 3/4". Outer D.25 mm - 1.1/32"
€4.10
Water hose 16X22mm 5/8 inches Sold by meter N43936112083
Made of flexible PVC, non-toxic, fitted with reinforced polyester thread; ideal for water distribution or for bilge pumps.
€2.50
White sanitary Anti-odour Hose 38mm 1-1/2 inches Sold by meter N41736312119
White sanitary hose. Sold by the metre. Inner D.38 mm - 1-1/2". Made of extremely flexible pvc with steel wire designed as sewage pipe for marine toilets. It has the advantage to limit the spreading of odours from the toilet drains.
€10.30
Fuel hose CE RINA approved 8/17mm Sold by meter N44736012000
ISO 7840: 2013 and CE 0474 R.I.N.A approved fuel hose made of rubber suitable for adduction of diesel and petrol fuels, operating temperature from -25°C to + 120°C, Ø8/17mm, sold by the meter.
€7.90
Fuel hose CE RINA approved 16/26mm Sold by meter N44736012004
Fuel hose CE RINA approved - 16x26mm - Sold by meter
€12.60
Fuel hose CE RINA approved 12/22mm Sold by meter N44736012002
Fuel hose CE RINA approved - 12x22mm - Sold by meter
€10.80
Fuel hose CE RINA approved 10/19mm Sold by meter N44736012001
Fuel hose CE RINA approved - 10x19mm - Sold by meter
€8.40
Fuel hose CE RINA approved 38/52mm Sold by meter N44736012010
Fuel hose CE RINA approved - 38x52mm - Sold by meter
€49.60
Fuel hose CE RINA approved 50/64mm Sold by meter N44736012012
Fuel hose CE RINA approved - 50x64mm - Sold by meter
€62.40
AIRFLEX STD Hard suction hose 70mm Sold by meter N44836212400
Pvc wire pvc hose suitable for air, fume, gas, for conditioning and ventilation.Tubo autoestinguente secondo le UL 94 VO. Temperaure range:-10°C° + 60°C°.
€18.00
AIRFLEX STD Hard suction hose 102mm Sold by meter N44836212410
AIRFLEX/std pvc hose suitable for air, fume, gas, for conditioning and ventilation.Tubo autoestinguente secondo le UL 94 VO. Temperaure range:-10°C° + 60°C°.
€27.70
Rule 1500GPH 03 submersible pump 24V 1,5A 100Lt/min 38522546
Rule 1500GPH submersible pump 24V model 03, delivery capacity 100Lt/min, hose connector D.1 1/8", dimension D.110xh150 mm
€173.90
€204.59
Rule 360GPH submersible pump 12V 2,5A 22Lt/min Model 24DA N44438522520
Rule 360GPH submersible pump 12V 2,5A, model 24DA, dimensions D.56xH80 mm, delivery capacity 22 Lt/min, hose connector D.3/4".
€44.70
€55.88
Rule Mate automatic bilge pump 12V 1100GPH - Model RM1100B N44438522509
Rule Mate automatic bilge pump 12V 1100GPH - Model RM1100B. 12V. Capacity 72l/m. Current draw 3.8A. Inlet Ø 25/29mm. Height A 111mm. Width B 72mm.
€208.71
€289.87
Rule 500 GPH submersible bilge pump 12V 2,5A 32Lt/min Model 25DA N44438522525
Rule 500 GPH submersible bilge pump 12V 32Lt/min, model 25DA, electric input 2,5A, D.56xH80 mm, hose connector D.19 mm
€56.61
€70.76
Rule-Mate RM750AM automatic submersible bilge pump 12V 750GPH 19x9x12cm 38522507
Rule-Mate automatic submersible bilge pump 750GPH. Dimensions 19x9x12cm. Model RM750AM. A great benefit for all boaters!
€143.61
€168.96
Rule-Mate RM 500A automatic submersible bilge pump 500GPH 12V 19x9x12cm 38522506
Rule-Mate RM 500A automatic submersible bilge pump 12V 2,5A 500GPH, delivery capacity 30lt/min, dimensions 19x9x12cm, hose connector D.3/4".
€115.02
€135.32
Rule LoPro LP900S 900GPH 3400 lt/hour 12V Bilge Pump 38522559
Designed to bring pumping power to tight spaces. Rule’s LoPro Series Bilge Pumps are only 2.25”high. The 900S model features two automated modes.
€104.05
€122.41
Rule 35A 12/24V 35A bilge pump switch 38522575
Rule bilge pump switch used to automize the bilge pump work. Hardy construction. Power supply 12/24V. Electric input 14A. Dimension 127x44x66 (h) mm. Rule 35A.
€63.73
€79.67
Rule 37FA automatic switch for bilge pumps OS1660120
Rule 37FA automatic switch for bilge pumps. Max capacity 20A. Size: 127x54x66 (h) mm. Fitted with safety fuse.
€111.94
€155.48
Huawei SUN2000-3KTL-L1 Hybrid Inverter 3kW 3300/4500W KRSUN2000
Huawei SUN2000-3KTL-L1 3kW 3300/4500W Single-Phase Hybrid Inverter designed for battery and backup box connection, for residential photovoltaic systems connected to the network, comply with the CEI 0-21 standard.
€678.81
€1,234.20
Huawei LUNA2000-5-SO 360V 5kWh + Power Module BMS High Voltage Lithium Battery
Huawei LUNA2000-5-SO 360V 5kWh + Power Module BMS High Voltage Lithium Battery.HUAWEI LUNA2000 5kWh modular high voltage lithium battery for single-phase and three-phase self-consumption systems with HUAWEI inverter, equipped with cells with lithium ferrophosphate (LiFePO4) technology, can be wall or surface mounted, 670x150x600mm, 63.8kg.
€2,926.99
€5,321.80