Home
Subcategories
There are 109 products.
CFG One-component polyurethane foam Lt 0,75 N730454COL996
CFG One-component polyurethane foam. One-component expanding polyurethane foam, easy and quick to use suitable for construction and restoration sector. Adheres to all materials. Unit size Lt 0,75
€10.50
€11.66
CRC Silicone Spray 250ml Silicone oil N730454LUB007
CRC Silicone Spray 250ml Silicone oil. Water-repellent, anti-adhesive, lubricates, protects metals and rubber, electrical insulator. Unalterable, inert, ecological.
€10.62
€11.80
CRC Marine 6-66 400ml Anti-corrosive for salty environments N730454LUB005
CRC Marine 6-66. Anti-corrosive for salty environments. Stops the corrosive process in progress and prevents new attacks from showing up, in particular if triggered by salts which are typical of a marine environment.
€13.81
€15.35
CRC Marine 6-66 100ml Protective Anticorrosion Unblocks Cleans Lubricates N730454LUB003
CRC Marine 6-66 100ml anti-corrosive for salty environments. Specific protective against the corrosive and short-circuiting action of salty atmospheres. Idroespellente. Unblock, cleanse and lubricate.
€6.35
€7.05
CRC SP 400 Corrosion Inhibitor Outdoors and Indoors 250ml N730454LUB017
CRC SP 400. Forms a thick amber coloured waxy film, touch dry that acts as long lasting corrosion inhibitor on metals, for interior and exterior application. 250ml.
€14.76
€16.40
CRC Teflub PTFE antiadhesive lubricant 400ml N730454LUB015
CRC PTFE antiadhesive lubricant, water-repellent, dry, polytetrafluoroethylene based, it does not retain dust, it does not form sludge and it does not stain. Unit size 400 ml.
€31.74
€35.27
CRC Contact cleaner 250ml Reactivating Detergent for Contacts N730454LUB025
"CRC - Contact Cleaner Detergent.
Pure solvent and detergent for highly sensitive electronic equipment.
"
Pure solvent and detergent for highly sensitive electronic equipment.
"
€15.76
€17.51
Yellow Watertight Case Empty 50x41x20cm N90056004795
Yellow Watertight Case. Size: 50x41x20cm. Empty case.
€54.90
€79.80
Seatop Pure Sine Wave Inverter 1200W 2400W 12VDC 230V AC N52722020934
Seatop 1200W 2400W 12VDC 230V AC Pure Sine Wave Inverter, suitable for all applications where you need to feed 230 Vac loads from a low voltage power source 12 Vdc
€212.00
€265.00
Barton Marine Winch Speed 8-1 FNI7821200
Suitable for boats up to 10mt, ideal for sheets and halyards in natural and artificial fibre. Speed: 8.1; Base Ø 101,6mm; Drum Ø 66,7mm; Height 101mm; Weight 0,835 kg.
€292.29
€417.56
Barton Marine Winch Speed 23-1 FNI7821202
Twin speed model 23:1. Suitable for boats up to 10mt, ideal for sheets and halyards in natural and synthetic materials. Base Ø 114,3 mm ; Drum Ø 66,7 mm ; Height 135 mm ; Weight 1,6 kg.
€517.71
€739.59
Barton Marine Winch Speed 16-1 FNI7821201
Suitable for boats up to 10mt, ideal for sheets and halyards in natural and synthetic materials. Speed: 16.1 ; Base Ø 114,3mm; Drum Ø 66,7mm; Height 135mm; weight 1,264 kg.
€376.33
€537.62
Pair Winchers Winch 70/80mm FNI7821642
A specially designed rubber moulding which fits over the top of standard winches, converting them to self-tailing. Sold in pairs. Wincher Ø 70-80mm. Rope Ø 10-14mm.
€111.88
€159.83
Pair Winchers 64/70mm FNI7821641
A specially designed rubber moulding which fits over the top of standard winches, converting them to self-tailing. Sold in pairs. Wincher Ø 64-70mm; Rope Ø 8-10mm.
€109.29
€156.12
Pair Winchers Winch 90/100mm FNI7821644
A specially designed rubber moulding which fits over the top of standard winches, converting them to self-tailing. Sold in pairs. Wincher Ø 90-100mm. Rope Ø 12-16mm.
€136.42
€194.88
Pair Winchers Winch 80/90mm FNI7821643
A specially designed rubber moulding which fits over the top of standard winches, converting them to self-tailing. Sold in pairs. Wincher Ø 80-90mm. Rope Ø 12-14mm.
€114.49
€163.55
Double Rope Clutch Rope max 12mm FNI7881501
Number of clutches: 2. Length: 133mm. Width 65mm. Height 68mm. Max cable Ø: 12mm.
Weight: 544gr.
Weight: 544gr.
€169.69
€242.41
Triple Rope Clutch Rope max 12mm FNI7881502
Number of clutches: 3. Length: 133mm. Width: 91mm. Height 68mm. Max cable: Ø12mm
Peso: 754gr.
Peso: 754gr.
€250.45
€357.79
Small snatch block snap shackle for ropes up to 12mm FNI7890301
Robust construction Snatch block with a simple opening / closing action. Extremely compact and robust, with a multitude of uses on cruising or racing boats. For ropes up to Ø 12 mm.
€109.60
€156.57
Triple Block with swivel head Becket and cam cleat Line max 10mm FNI7803531
SIZE 3 - Triple Block with swivel head, Becket and cam cleat, sheave Ø 45x14mm, suitable for line max Ø 10mm. max working load 385Kg, breaking load 770Kg.
€99.67
€142.39
Large snatch block with D Schackle for ropes up to 16mm FNI7890402
Robust construction Snatch block with a simple opening / closing action. Extremely compact and robust, with a multitude of uses on cruising or racing boats. For ropes up to Ø 16mm. With D Schackle.
€105.32
€150.45
Large snatch block with snap shackle for ropes up to 16mm FNI7890401
Robust construction Snatch block with a simple opening / closing action. Extremely compact and robust, with a multitude of uses on cruising or racing boats. For ropes up to Ø 16mm.
€140.24
€200.35
Boom strut for boats FNI7844001
For dinghies; rod length 76,2cm, can be reduced up to a maximum of 12,5cm; max work load 45kg.
€272.60
€389.42
Rigid boom strut for boats from 6 to 7,5mt FNI7844020
Supports the boom at all times. Prevents accidents when the topping lift is incorrectly set or adjusted.
€406.80
€581.15
Rigid Boom strut for boats up to 6mt FNI7844010
Supports the boom at all times. Prevents accidents when the topping lift is incorrectly set or adjusted.
€385.85
€551.21
Rigid boom strut for boats from 10,5 to 12mt FNI7844040
Supports the boom at all times. Prevents accidents when the topping lift is incorrectly set or adjusted. Fits all types of mast and boom extrusions.
€634.67
€906.67
Rigid boom strut for boats from 9 to 10,5mt FNI7844035
Supports the boom at all times. Prevents accidents when the topping lift is incorrectly set or adjusted. Fits all types of mast and boom extrusions.
€586.06
€837.23
Rigid boom strut for boats from 7,5 to 9 mt FNI7844030
Supports the boom at all times. Prevents accidents when the topping lift is incorrectly set or adjusted.
€452.88
€646.97
High Load Low Friction Eye/Ring with Dyneema loop Internal 28mm FNI7860462
High Load low friction Eye/Ring in marine grade aluminium and finished in grey anodising with Dyneema loop. Internal Ø 28mm. Dyneema loop length 310mm. Work load 3600Kg.
€163.56
€233.65
High Load Low Friction Eye/Ring with Dyneema loop Internal 22mm FNI7860461
High Load low friction Eye/Ring in marine grade aluminium and finished in grey anodising with Dyneema loop. Internal Ø 22mm. Dyneema loop length 230mm. Work load 2400Kg.
€112.52
€160.75
Jib furling with Drum 95mm FNI7842335
Jib furling with Drum Ø 95mm, rope Ø 4mm, work load 554Kg, break load 1108Kg.
€99.99
€142.84
Rule 1500GPH 03 submersible pump 24V 1,5A 100Lt/min 38522546
Rule 1500GPH submersible pump 24V model 03, delivery capacity 100Lt/min, hose connector D.1 1/8", dimension D.110xh150 mm
€192.04
€266.72
Rule 360GPH submersible pump 12V 2,5A 22Lt/min Model 24DA N44438522520
Rule 360GPH submersible pump 12V 2,5A, model 24DA, dimensions D.56xH80 mm, delivery capacity 22 Lt/min, hose connector D.3/4".
€44.70
€55.88
Rule Mate automatic bilge pump 12V 1100GPH - Model RM1100B N44438522509
Rule Mate automatic bilge pump 12V 1100GPH - Model RM1100B. 12V. Capacity 72l/m. Current draw 3.8A. Inlet Ø 25/29mm. Height A 111mm. Width B 72mm.
€208.71
€289.87
Rule 500 GPH submersible bilge pump 12V 2,5A 32Lt/min Model 25DA N44438522525
Rule 500 GPH submersible bilge pump 12V 32Lt/min, model 25DA, electric input 2,5A, D.56xH80 mm, hose connector D.19 mm
€56.61
€70.76
Rule-Mate RM750AM automatic submersible bilge pump 12V 750GPH 19x9x12cm 38522507
Rule-Mate automatic submersible bilge pump 750GPH. Dimensions 19x9x12cm. Model RM750AM. A great benefit for all boaters!
€194.13
€242.66
Rule-Mate RM 500A automatic submersible bilge pump 500GPH 12V 19x9x12cm 38522506
Rule-Mate RM 500A automatic submersible bilge pump 12V 2,5A 500GPH, delivery capacity 30lt/min, dimensions 19x9x12cm, hose connector D.3/4".
€156.06
€195.08
Rule LoPro LP900S 900GPH 3400 lt/hour 12V Bilge Pump 38522559
Designed to bring pumping power to tight spaces. Rule’s LoPro Series Bilge Pumps are only 2.25”high. The 900S model features two automated modes.
€136.39
€170.48
Rule 35A 12/24V 35A bilge pump switch 38522575
Rule bilge pump switch used to automize the bilge pump work. Hardy construction. Power supply 12/24V. Electric input 14A. Dimension 127x44x66 (h) mm. Rule 35A.
€63.73
€79.67
Rule 37FA automatic switch for bilge pumps OS1660120
Rule 37FA automatic switch for bilge pumps. Max capacity 20A. Size: 127x54x66 (h) mm. Fitted with safety fuse.
€111.94
€155.48
SeaTop ABS mounting brackets kit for solar panels with frames N52331550201
SeaTop ABS mounting brackets kit for solar panels with aluminum frame with 25 mm rear edge. Complete with A2 stainless steel screws.
€19.90
Seatop Pair of bronze battery clamps and stainless steel screws for batteries N51420001132
Bronze battery clips packed in pairs (1 x Positive, 1 x Negative), selected pins sizes 8 and 10 mm used to avoid inverting battery cables, version fitted with stainless steel pins and screw nuts.
€13.41
€14.90
Seatop Pair of bronze clamps with stainless steel screws + terminal covers for batteries N51420001132
Bronze battery clips packed in pairs (1 x Positive, 1 x Negative) with terminal covers made of black and red PVC, designed to cover and isolate battery clamps.
€17.01
€18.90
Seatop Stainless steel A2 UNI 704 DIN 571 6x50mm Wood Screws 100pcs N44590006944
Seatop Hexagonal head wood screws made of stainless steel A2 UNI 704 DIN 571, Ø6mm, length 50 mm, 100 pieces pack.
€4.90