Best sellers

Undercoat epoxy filler for use in two-component cycles of topsides. Excellent compact film thanks to excellent flow, is easy to sand and provides a perfect surface finish.

High-quality epoxy primer, used as an anchoring coat on difficult surfaces such as aluminium, fibreglass, steel and wood.

Two-component modified epoxy primer usable on all hull types. This product can be applied as primer or undercoat in painting systems. Its special feature is that it can be overcoated by any Boero antifouling even after a long time.

It allows the application of single-component alkyd and / or polyurethane enamels on new or aged two-component products. It can be applied directly on any type of support after appropriate preparation.

Boero Delta UC HB High thickness two-component epoxy primer for epoxy and polyurethanes cycles which, because of the remarkable quality of protection, can be used on any type of support, in areas above and below the waterline of the boat.

Self-polishing antifouling paint formulated according to a new technology that uses specific copolymers and biocides that allow a controlled solubility of the film. It can be applied on wooden, steel, fiberglass hulls.

Highly effective long life antifouling, free from organostannic toxins, with a high content of a special copper salt. It protects wood, steel and fibreglass hulls for many seasons.

Especially suitable for the protection of yachts and/or equipment in a marine environment. It can be applied on all hull types. High resistance, brushability, easy application and fast drying all attribute to obtain a glossy finish.

UniPro 250 is an antifouling product effective against fouling organisms; slime, aquatic plants and animals. A Polishing Antifouling suitable for professional application on boats in fresh and salt water.

International Danboline 2,5Lt White

International Danboline 2,5Lt Grey

International Gelshield 200 Anti Osmosis Treatment 2,5Lt Green colour

Interfill 830 is the best choice for profiling above and below the waterline of hulls made of steel, aluminum and composite.

High performance two part polyurethane undercoat suitable for all finishes. Perfection Undercoat is the ideal base for a long lasting scheme, when used with Perfection Finish. #N702458COL6662

International Toplac Polish. Formulated to achieve excellent performance, it retains its colour and shine three times longer than conventional glazes. Toplac contains strengthened filters against damage caused by UV rays. White 545. Pack 0.75Lt.

High-performance, self-polishing antifouling with effective protection against organisms such as algae. Suitable for professional and consumer use on boats in fresh and salt water.

Thinner No.9 is suitable for thinning and / or equipment cleaning in association with: Perfection Varnish, Perfection, Perfection Undercoat. #N702458COL6502

HEMPEL HIGH PROTECT is a two-component high build amine adduct epoxy primer, solvent-free. It forms a hard, tough and water-resistant coating.

Marlin Fiberglass Primer Pink 2.5lt

Marlin Velox Plus Antifouling for Stern Drives Fluo Orange 0.25 lt

Marlin TF Antifouling Oxide Red 2.5 lt

Marlin Super 505 semi-hard Antifouling Black 0.75 lt

Marlin Triton Antifouling White 2.5lt (MSD))

Marlin Thinner n. 4 for Velox Plus and Fiberglass Primer 0.5lt. Thinners for the following products: VELOX PLUS, METAL PRIMER, FLEXY antifouling, FLEXY enamel, EVERGLOSS (brush) FIBERGLASS PRIMER.

It is a special non-toxic compound that is able to soften the old coats of antifouling paint but not the gel coat or fibreglass.

Marlin TF Antifouling White Colour 5 lt

IDRON is a revolutionary water-based antifouling paint. IDRON is a hard, non-soluble antifouling paint with a unique combination of binders and active principles.

Hempel Aluxtra Self polishing antifouling. It changes to its final colour after approximately 1 week of exposure to water. Due to its self-renewing effect this product maintains an effective bioactive surface during its entire service life. Black colour. Pack 2.5Lt.

Boatguard 100 is an antifouling product effective against fouling organisms; slime, aquatic plants and animals. A Polishing Antifouling suitable for professional and consumer application on vessels in fresh and salt water.

Self-polishing antifouling containing a combination of copper compounds and organic biocides. Changes to its final colour after about a week in immersion.

Hard matrix antifouling containing high performance TecCel forming a smooth low friction. For boats that need to increase performance and speed. Seasonal protection from fouling without chalking.

Boero Thinner 698 Medium Thinner for two-component Polyurethanes. For application by spray. Pack of 0.5lt.

One-component polyurethane varnish with special UV additives. Due to its very subtle exterior appearance, it is widely used on all types of high quality wood used for the interiors of the boats.

Clear synthetic varnish. It is resistant to environmental marine factors and UV rays.

Ultra light, high build two-component Epoxy filler, mostly used when it is important to obtain high quality finishing, without increasing the weight of the boat.

Epoxy coating for internal use where there is contact with foodstuff and fresh water.

Glossy topcoat for bilges based on particular resins that confers good chemical resistance, in particular to penetration of humidity, oils, fuel and detergents.

Especially suitable for the protection of yachts and/or equipment in a marine environment. It can be applied on all hull types. High resistance, brushability, easy application and fast drying all attribute to obtain a glossy finish.